N-Monobromamide: Darstellung durch Bromierung mit „Dibromisocyanursäure”, Eigenschaften

By reaction of primary carboxamides with “dibromoisocyanuric acid” (DBI) N-monobromoamides can be readily obtained as well as the N,N-dibromoamides described in an earlier paper¹. Reactions, some of them new, and properties of these compounds are described and compared with those of the N,N-dibromoamides. Like other compounds bearing the NHBr group^{2, 3} the N-monobromocarboxamides disproportionate at room temperature according to: 2 RCONHBr ? ? RCONH₂+RCONBr₂. For CH₃CONHBr the equilibrium constant was found to beK=0.02. In aqueous solution they behave as weak acids. The dissociation constants of eight compounds [R=?CH₃, ?C₂H₅, ?CH₂Cl, ?CHCl₂, ?CCl₃, ?CF₃, ?C(CH₃)₃ and ?C₆H₅] were measured: they differ from those of the corresponding carboxylic acids by about three powers of ten.     

Zum Mechanismus der Hydrogenolyse aromatisch gebundenen Halogens

The selective chlorination of a m/p-xylene mixture, followed by distillation of the unreacted p-xylene, leaves a residue containing up to 90% of monochlorinated m-xylenes. m-Xylene is recovered from the latter by heterogeneous catalytic hydrogenolysis in the gas-phase. It was found that the hydrogenolysis on certain noble metal catalysts proceeds according to an ionic reaction mechanism at temperatures below a definite temperature range. At temperatures above this range hydrogenolysis follows a radical reaction mechanism.     

Diverse redox-active molecules bearing O-, S-, or Se-terminated tethers for attachment to silicon in studies of molecular information storage

A molecular approach to information storage employs redox-active molecules tethered to an electroactive surface. Attachment of the molecules to electroactive surfaces requires control over the nature of the tether (linker and surface attachment group). We have synthesized a collection of redox-active molecules bearing different linkers and surface anchor groups in free or protected form (hydroxy, mercapto, S-acetylthio, and Se-acetylseleno) for attachment to surfaces such as silicon, germanium, and gold. The molecules exhibit a number of cationic oxidation states, including one (ferrocene), two [zinc(II)porphyrin], three [cobalt(II)porphyrin], or four (lanthanide triple-decker sandwich compound). Electrochemical studies of monolayers of a variety of the redox-active molecules attached to Si(100) electrodes indicate that molecules exhibit a regular mode of attachment (via a Si-X bond, X = O, S, or Se), relatively homogeneous surface organization, and robust reversible electrochemical behavior. The acetyl protecting group undergoes cleavage during the surface deposition process, enabling attachment to silicon via thio or seleno groups without handling free thiols or selenols.     

Water-Soluble imide-amide copolymers. II. Preparation and characterization of poly (acrylamide-co-p-maleimidobenzoic acid)

The comonomer required, p-maleimidobenzoic acid (MBA) was first prepared in good yield by refinements of published methods. p-Carboxysuccinanilic acid (CSA), and p-succinimidobenzoic acid (SBA), were also prepared to provide models useful for IR and NMR for spectroscopic assignments of the new copolymers. Polymerization of MBA with acrylamide in glacial acetic acid at 60°C gave copolymers with estimated viscosity average molecular weights of 60,000 to 90,000. Yields and viscosity average molecular weights decreased as the MBA to acrylamide monomer feed ratio was increased. The rate of incorporation of MBA into the copolymer rose from 7 to 23% when the mole ratio in the feed was raised from 5 to 20%. Decreasing the initiator concentration increased molecular weights by less than predicted and reduced the yield of copolymer for any given feed ratio of MBA to acrylamide. In all cases about 30–40% of the MBA units in the purified copolymers were hydrolyzed. A change to dimethyl sulfoxide solvent gave good, and poor yields of copolymer at 5 and 10 mol % MBA, respectively, and no copolymer at 20 mol % MBA. Viscosity average molecular weights of the copolymer products prepared in DMSO were somewhat lower than obtained for the copolymers prepared in acetic acid. Polymerization in a DMSO-water mixture gave a negligible yield of polymeric product. Instead, only hydrolysates of MBA precipitated when the coloured polymerization solutions were added to methanol.     

Metallchelate mit Acetophenon-Benzoylhydrazon und Acetophenon-Salicoylhydrazon

The stoichiometry and structure of acetophenone benzoylhydrazone and acetophenone salicoylhydrazone chelates with some divalent metal ions are studied by conductometric titration and visible and infra-red absorption spectrophotometry. The results are supported by analysis of the solid complexes. The infra-red study revealed that coordination occurs through C=O and C=N groups. The shift in the C=O and C=N bands is utilised for the determination of bond lengths.     

PROBING THE STRUCTURE OF HPD BY FLUORESCENCE SPECTROSCOPY

Fluorescence emission spectra indicate that oligomers containing both hematoporphyrin and its dehydration products (vinyl porphyrins) comprise the tumor-localizing fraction of HPD. In the relatively polar solvent methanol, the vinyl porphyrins exhibit reduced fluorescence yields while the hematoporphyrin residues are relatively resistant to fluorescence quenching by Fe+3. In the less polar solvent tetrahydrofuran, fluorescence from oligomeric vinyl porphyrins was enhanced, and Fe+3-induced quenching of oligomeric hematoporphyrin promoted. These, together with other studies in biological systems, suggest a substantial degree of interaction among the porphyrin units contained in these oligomers, as a function of the polarity of the environment.     

Zur Kenntnis der thermischen Zersetzung von Ammoniumhexafluoroscandat,-titanat,-vanadat und-chromat

Thermal analysis supported by kinetic calculations was applied exhaustively to these compounds. Under dynamic conditions, tetrafluorometallates(III), which as intermediates, could not be isolated, for the first three compounds. In each case, the final step was the pure metal(III) fluoride. Ammonium hexafluorochromate(III) decomposed directly to the pure chromium(III) fluoride. The decomposition rate of all compounds slowed down towards the end, probably for kinetic reasons. Polymorphic transitions of ammonium hexafluorotitanate(III) were observed at 35 and 100°C. Ammoniumhexafluoroscandate(III) underwent polymorphic transition at 47°C. The decomposition patterns for all these compounds were similar. Conditions for the preparation of pure ammonium tetrafluorometallates(III) of Sc, Ti and V are described.     

Synthesis of a tetraazacyclotetradecadiene and a pentaazacyclotetradecatriene

Useful procedures for preparing a novel tetraazacyclotetradecadiene and a pentaazacyclotetradecatriene are reported. J. Heterocyclic Chem., 14, 1097 (1977)     

Untersuchungen zur 3-Phononenabsorption in partiell kristallinen Polymeren

Zusammenfassung In dieser Arbeit wird die Dreiphononenabsorption in Polymeren, die den Hauptanteil an den dielektrischen Verlusten im Millimeterwellengebiet stellt, theoretisch und experimentell untersucht. Aus der Störungsrechnung bis zur 2. Ordnung wird die Temperaturabhängigkeit der Absorption abgeschätzt. Damit ist eine befriedigende Deutung des gesamten Temperaturverlaufs der dielektrischen Verlust-Kurven möglich. Im Hochtemperaturbereich läßt sich die Mehrphononenabsorption eindeutig gegenüber restlichen Relaxationsprozessen abgrenzen. Im Tieftemperaturgebiet konnte erstmals auch für das Millimeterwellengebiet ein temperaturunabhängiger Bestandteil fehlordnungsinduzierter Einphononenabsorption nachgewiesen werden. Im Übergangsbereich durchlaufen die Absorptionskurven einen Wendepunkt bei einer charakteristischen TemperaturT ₀, die dem Schwerpunkt der am Absorptionsprozeß beteiligten Phononenfrequenzen entspricht. Daraus konnten in Übereinstimmung mit dem Experiment die Frequenzen der niedrigsten optisch aktiven Phononen für die verschiedenen Polymeren abgeschätzt werden.

---

Summary The 3-phonon absorption in polymers, which gives the main contribution to their dielectric loss in the microwave region, is theoretically and experimentally investigated. Perturbation theory up to the second order is used for the evaluation of its temperature dependence. The theoretical results allow an interpretation of the total absorption-temperature-curves: In the high temperature region 3-phonon absorption can be distinguished from residual relaxation losses (above the glass temperature). In the low temperature region the existence of a low frequency tail of temperature independent disorderinduced one-phonon absorption became evident. At intermediate temperatures (50–150°K) the curves show an inflexion point or plateau at a characteristic temperatureT ₀, which according toT ₀= ⁰, corresponds to the frequencies of those phonons, that mainly contribute to the multiphonon absorption. The plateau gives, in good agreement with the experiment, the frequencies of the lowest optically active phonons in the various polymers.

---

---

Mit 6 Abbildungen in 8 Einzeldarstellungen

---

Vorgetragen auf der Arbeitssitzung des Fachausschusses Physik der Hochpolymeren in der Frühjahrstagung 1970 des Regionalverbandes Hessen-Mittelrhein-Saar der Deutschen Physikalischen Gesellschaft in Darmstadt, 10.–13. März 1970.     

Structure des savons alcalins

Summary This is a systematic X-ray diffraction study of the structure of the mesomorphic phases occurring with potassium soaps ranging from C₈ to C₂₂.Four types of structure have been identified. The first is lamellar with both polar groups and paraffin chains in the crystalline state. The second is also lamellar, but with both polar groups and paraffin chains in the liquid state. The third corresponds to the localization of indefinitely long ribbons on a two-dimensional oblique lattice; polar groups are crystalline and paraffin chains desorganized. The fourth corresponds to the localization of discs on a three-dimensionnalB-faces centered orthorhombic lattice; polar groups are crystalline and paraffin chains disorganized.The structural parameters and the polymorphism of the polar groups have been discussed.

---

Zusammenfassung Wir beschreiben hier eine systematische Röntgenstrahlendiffraktionsforschung der Struktur der mesomorphen Phasen von Kalium Seifen von C₈ bis C₂₂.Vier Strukturtypen wurden gefunden. Die erste Struktur ist lamellar; beides, die polaren Gruppen und die Paraffinketten sind kristallisiert. Die zweite Struktur ist auch lamellar; aber in diesem Falle sind beides, die polaren Gruppen und Paraffinketten geschmolzen. Die dritte Struktur entspricht einer Lokalisation von Seifenbändern in einem zweidimensionalen monoklinen Gitter; die polaren Gruppen sind kristallisiert und die Paraffinketten geschmolzen. Die vierte Struktur entspricht einer Lokalisation von Seifenscheiben in einemB-flächenzentrierten orthorhombischen Raumgitter; die Polargruppen sind kristallisiert und die Paraffinketten geschmolzen.Wir haben aus den experimentellen Resultaten einige Schlußfolgerungen gezogen.