Monte Carlo characterisation of a Compton suppressed broad-energy HPGe detector

GEANT4 Monte Carlo simulations have been successfully utilised to characterise a Compton suppressed broad-energy HPGe detector. The detector setup has been fully recreated in the simulation, which has been optimised to consistently reproduce the detector response. The peak efficiencies for both the primary BEGe detector and NaI(Tl) guard detectors agree with the simulated values for multiple test sources within 3 %. Compton suppression has also been simulated, with good agreement seen between the simulated and actual CSF values (<10 %) for multiple radionuclides. A secondary reference source was also simulated, which contained up to 30 radionuclides in a different geometry to that of the previous source. This showed excellent agreement with experimental data in both unsuppressed and suppressed modes of operation.     

Magnetic Resonance Imaging of Electrochemical Cells Containing Bulk Metal

The development of improved energy‐storage devices, as well as corrosion prevention and metal‐electrofinishing technologies, requires knowledge of local composition and transport behaviour in electrolytes near bulk metals, in situ and in real time. It remains a challenge to acquire such data and new analytical methods are required. Recent work shows that magnetic resonance imaging (MRI) is able to map concentration gradients and visualise electrochemical processes in electrochemical cells containing bulk metals. This recent work, along with the challenges, and solutions, associated with MRI of these electrochemical cells are reviewed.     

The hydrolysis mechanism of bis(2,4-di-tert-butyl)pentaerythritol diphosphite (Alkanox P24): An atmospheric pressure photoionisation mass spectrometric study

Alkanox P24 is a commercial phosphite antioxidant, well known in the literature for its excellent processing stability. As in the case of many processing phosphites, however, Alkanox P24 might undergo hydrolysis when exposed to small amounts of water. A number of products proposed recently in the hydrolytic pathway of the phosphite [Ortuoste N, Allen NS, Papanastasiou M, McMahon A, Edge M, Johnson B, et al. Polym Degrad Stab; 2006;91:195-211] are investigated in this study by atmospheric pressure ionisation-mass spectrometry (API-MS). The applicability of atmospheric pressure photoionisation (APPI) and atmospheric pressure chemical ionisation (APCI) ion sources is tested and the ion formation characteristics of Alkanox P24 are compared in both sources. In positive ion mode, ionisation of the parent phosphite occurred by protonation. In negative ion mode no pseudo-molecular ion peak was detected and the deprotonated species were more dominant in APPI. This source was employed further for the investigation of the hydrolysis products, since it exhibited lower limits of detection. High performance liquid chromatography (HPLC) with single ion monitoring (SIM) detection was used for the separation of the species formed. Hydrolysis of the phosphite proceeded via the scission of the two P-O_phenol bonds exclusively to give 2,4-di-tert-butyl phenol quantitatively as a final product.     

Structure-dependent reactivity of semiconducting single-walled carbon nanotubes with benzenediazonium salts

The addition of diazonium salts to single-walled carbon nanotubes (SWCNTs) in aqueous surfactant suspensions quenches the intrinsic near-infrared fluorescence of semiconducting SWCNTs through sidewall chemical reactions. Spectrally resolved fluorescence spectroscopy of mixed SWCNT samples has been used to measure structure-dependent relative reactivities in the initial stages of these reactions. For several 4-substituted benzenediazonium salts, Ar-R (Ar = N 2 (+)-C 6H 4 and R = Cl, NO 2, OMe), reactivities at pH 10 were found to be greatest for SWCNTs having the largest band gaps. The magnitude of this band gap dependence varies according to the R-group of the salt, with R = OMe showing the strongest variation. For R = OH, acidification of the sample to pH 5.5 results in reversal of the structural trend, as smaller band gap SWCNTs show slightly greater reactivities. The derivatization reactions observed here proceed concurrently, although at different rates, for semiconducting and metallic SWCNT species. These results therefore provide insight into the difficulties of separating metallic and semiconducting SWCNTs through selective reaction schemes and underscore the need for fluorescence spectroscopy to be used in assessing semiconducting SWCNT reactions.     

Diazonium functionalization of surfactant-wrapped chemically converted graphene sheets

Surfactant-wrapped chemically converted graphene sheets obtained from reduction of graphene oxide with hydrazine were functionalized by treatment with aryl diazonium salts. The nanosheets are characterized by X-ray photoelectron spectroscopy, attenuated total reflectance infrared spectroscopy, Raman spectroscopy, atomic force microscopy, and transmission electron microscopy. The resulting functionalized nanosheets disperse readily in polar aprotic solvents, allowing alternative avenues for simple incorporation into different polymer matrices.     

Clean reconstructed InAs(1 1 1) A and B surfaces using chemical treatments and annealing

Well-ordered clean InAs(1 1 1) A and B surfaces have been prepared using HCl-isopropanol solutions and characterized using low-energy electron diffraction and photoemission spectroscopy. The as-treated surfaces are covered by a layer containing arsenic and small amounts of InCl_x. Annealing induces desorption of the overlayer and reveals (2 × 2) and (1 × 1) structures on the A and B surfaces, respectively. For both surfaces, the surface components of the In 4d and As 3d reveal a charge transfer from the electropositive surface indium to the electronegative surface arsenic. The major advantage of this preparation method over conventional thermal cleaning is a significant reduction in the annealing temperature (≈250 °C) thereby avoiding anion evaporation.