Templating and selection in the formation of macrocycles containing [[P(micro-NtBu)(2)](micro-NH)](n) frameworks: observation of halide ion coordination

Amination of [ClP(micro-NtBu)](2) (1) using NH(3) in THF gives the cyclophospha(III)zane dimer [H(2)NP(micro-NtBu)](2) (2), in good yield. (31)P NMR spectroscopic studies of the reaction of 1 with 2 in THF/Et(3)N show that almost quantitative formation of the cyclic tetramer [[P(micro-NtBu)](2)(micro-NH)](4) (3) occurs. The remarkable selectivity of this reaction can (in part) be attributed to pre-organisation of 1 and 2, which prefer cis arrangements in the solid state and solution. The macrocycle 3 can be isolated in yields of 58-67 % using various reaction scales. The isolation of the major by-product of the reaction (ca. 0.5-1 % of samples of 3), the pentameric, host-guest complex [[P(micro-NtBu)(2)](2)(micro-NH)](5)(HCl).2 THF] (4.2 THF), gives a strong indication of the mechanism involved. In situ (31)P NMR spectroscopic studies support a stepwise condensation mechanism in which Cl(-) ions play an important role in templating and selection of 3 and 4. Amplification of the pentameric arrangement occurs in the presence of excess LiX (X=Cl, Br, I). In addition, the cyclisation reaction is solvent- and anion-dependent. The X-ray structures of 2 and 4.2 THF are reported.     

Steric control in the oligomerisation of phosphazane dimers; towards new phosphorus-nitrogen macrocycles

The reaction of [ClP(mu-NtBu)]2 (1) with H2O (1 : 2 equivalents) in the presence of excess Et3N gives the new chain compound [(mu-O)[P(mu-NtBu)2P(H)=O]2] (3), consisting of two P2N2 rings linked by a mu-O atom and terminating in P(V)(H)=O groups. A similar chain species is obtained from the reaction of the lithiate of [(tBuNH)P(mu-NtBu)2P(H)=O] (5) with [ClP(mu-NtBu)2P(NHtBu)] (2), the product being [(mu-O)[P(mu-NtBu)2P(NHtBu)]2] (6). Compounds 3 and 6 are the first examples of O-bridged chain phosphazanes and potential precursors to new phosphorus-nitrogen macrocycles. The syntheses and X-ray structures of 3, 5 and 6 are reported.     

Polymers from aryl cyclic sulfonium zwitterions—photosensitive materials cast from and developed in water

Upon photolysis or heating, aryl cyclic sulfonium (ACS) zwitterions polymerize by ring‐opening and loss of charge to yield nonionic polymers. These water‐soluble monomers potentially are useful for photolithography because they can be cast from and developed in water. The ACS zwitterion from bisphenol A, 1,1′‐[isopropylidenebis(6‐hydroxy‐3,1‐phenylene)] bis (tetrahydrothiophenium hydroxide) bis(inner salt) (1) is a negative‐tone, photosensitive material that after photolysis yields a crosslinked film. Unexposed regions are removed by water. The cured film has a low dielectric constant, high volume resistivity, a high degree of planarization, low residual stress, thermogravimetric stability, acceptable fracture toughness, and high hardness. These are desirable properties for a dielectric material used in microelectronic applications. However, a shortcoming of the material is its low T_g, at about 140 °C. A second ACS zwitterion, 1,1′‐[fluorenylidenebis(6‐hydroxy‐3,1‐phenylene)] bis(tetrahydrothiophenium hydroxide) bis(inner salt) (2) was prepared that yields a crosslinked polymer with a higher T_g of about 190 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1283–1290, 2000     

Dirhodium(II)-catalyzed carbonyl ylide generation. Stereoelectronic control in dioxolane formation

The combination of ethyl diazoacetate with aryl aldehydes in the presence of copper(I) or rhodium(II) catalysts results in the formation of 1,3-dioxolane products in moderate to good yields. These reactions occur through a pathway that involves ylide intermediates. Catalyst-dependent diastereocontrol is observed and suggests that metal-associated ylides are involved in the product-determining step. The influence of aryl aldehyde substituents has been determined. Current address. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 961–965, May, 1998.     

Magnetic Resonance Imaging of Electrochemical Cells Containing Bulk Metal

The development of improved energy‐storage devices, as well as corrosion prevention and metal‐electrofinishing technologies, requires knowledge of local composition and transport behaviour in electrolytes near bulk metals, in situ and in real time. It remains a challenge to acquire such data and new analytical methods are required. Recent work shows that magnetic resonance imaging (MRI) is able to map concentration gradients and visualise electrochemical processes in electrochemical cells containing bulk metals. This recent work, along with the challenges, and solutions, associated with MRI of these electrochemical cells are reviewed.     

A rapid dissolution procedure to aid initial nuclear forensics investigations of chemically refractory compounds and particles prior to gamma spectrometry

A rapid and effective preparative procedure has been evaluated for the accurate determination of low-energy (40–200 keV) gamma-emitting radionuclides (²¹⁰Pb, ²³⁴Th, ²²⁶Ra, ²³⁵U) in uranium ores and uranium ore concentrates (UOCs) using high-resolution gamma ray spectrometry. The measurement of low-energy gamma photons is complicated in heterogeneous samples containing high-density mineral phases and in such situations activity concentrations will be underestimated. This is because attenuation corrections, calculated based on sample mean density, do not properly correct where dense grains are dispersed within a less dense matrix (analogous to a nugget effect). The current method overcomes these problems using a lithium tetraborate fusion that readily dissolves all components including high-density, self-attenuating minerals/compounds. This is the ideal method for dissolving complex, non-volatile components in soils, rocks, mineral concentrates, and other materials where density reduction is required. Lithium borate fusion avoids the need for theoretical efficiency corrections or measurement of matrix matched calibration standards. The resulting homogeneous quenched glass produced can be quickly dissolved in nitric acid producing low-density solutions that can be counted by gamma spectrometry. The effectiveness of the technique is demonstrated using uranium-bearing Certified Reference Materials and provides accurate activity concentration determinations compared to the underestimated activity concentrations derived from direct measurements of a bulk sample. The procedure offers an effective solution for initial nuclear forensic studies where complex refractory minerals or matrices exist. It is also significantly faster, safer and simpler than alternative approaches.     

Monte Carlo characterisation of a Compton suppressed broad-energy HPGe detector

GEANT4 Monte Carlo simulations have been successfully utilised to characterise a Compton suppressed broad-energy HPGe detector. The detector setup has been fully recreated in the simulation, which has been optimised to consistently reproduce the detector response. The peak efficiencies for both the primary BEGe detector and NaI(Tl) guard detectors agree with the simulated values for multiple test sources within 3 %. Compton suppression has also been simulated, with good agreement seen between the simulated and actual CSF values (<10 %) for multiple radionuclides. A secondary reference source was also simulated, which contained up to 30 radionuclides in a different geometry to that of the previous source. This showed excellent agreement with experimental data in both unsuppressed and suppressed modes of operation.     

Dialkyl Ether Formation by Nickel‐Catalyzed Cross‐Coupling of Acetals and Aryl Iodides

A new substrate class for nickel‐catalyzed C(sp³) cross‐coupling reactions is reported. α‐Oxy radicals generated from benzylic acetals, TMSCl, and a mild reductant can participate in chemoselective cross‐coupling with aryl iodides using a 2,6‐bis(N‐pyrazolyl)pyridine (bpp)/Ni catalyst. The mild, base‐free conditions are tolerant of a variety of functional groups on both partners, thus representing an attractive C? C bond‐forming approach to dialkyl ether synthesis. Characterization of a [(bpp)NiCl] complex relevant to the proposed catalytic cycle is also described.