Adaptation of an echelle spectrograph to a large CCD detector

A broad range echelle spectrograph with a CCD matrix detector is developed for different applications in atomic spectroscopy. The compact optical design in combination with a dispersive entrance slit illumination offers a low stray light level and high throughput in the UV spectral region comparable only with spectrographs of higher focal length. Ray tracing calculations for typical wavelengths and the multi-line spectrum of an iron arc show the excellent overall spectrum quality. The subtraction of two partial spectra of different steel alloys demonstrates the spectra evaluation possibilities of the CCD spectrograph.     

Matrix effects in the determination of butyltin compounds in environmental samples by GC AA after hydride generation

Experiments for the determination of mono-, di and tri-butyltin (MBT, DBT and TBT) by hydride generation/gas chromatography/atomic absorption spectrometry in various matrices (sediment, suspended matter, mussel, algae and water) have revealed that poor butyltin recoveries are obtained in sediments displaying high sulphur and hydrocarbon contents; very poor recoveries were also observed for TBT in sediments with high chlorophyll pigment contents as well as in algal samples. It was however not clear whether the hydride generatin was inhibited by these infering compounds, as was previously assumed in the case of hydrocarbons, or whether interferences affected the atomization rate. Further studies were performed to solve this problem in order to validate this method in the case of analyses of, for example, oil-contaminated sediment and algae. This paper presents the results obtained. It is concluded here that the poor recoveries were due to an inhibition of hydride generation rather than to interference at the atomization stage.     

TLC-screening of important pharmaceutical substances using fluorescence detection

Summary Observation of fluorescence reactions on TLC plates is a valuable additional tool within the scope of screening procedures for many toxicologically relevant substances commonly encountered in clinical- and forensic-toxicological analysis. The reactions are based on native fluorescence without any treatment and on reactions obtained with an approved derivatization procedure. Due to the enormous sensitivity of the fluorescence detection, the method is also applicable to very low concentrations and small amounts of biological materials. The procedures described in this article have proven their high pragmatic usefulness in many practical cases.Dedicated to Professor Dr. Wilhelm Fresenius on the occasion of his 80th birthday     

X-ray diffraction study of 'side-on fixed' homopolysiloxanes from nematic to smectic C phases

The X-ray patterns for the nematic phase in a series of side-on fixed polysiloxanes show different kinds of diffuse elements which imply complex short range ordering. A systematic structural study of the evolution of the patterns versus two molecular parameters, namely the spacer length and the length of the terminal aliphatic tails, suggests the possible occurrence of a smectic C phase for certain values of these parameters. Taking into account these tendencies, new synthesis led to a nematic-smectic C polymorphism observed for the first time in side-on fixed polysiloxanes.     

Hybrid organosilazane/organosilylamine telechelic oligomers—I. Two-dimensional NMR spectroscopy characterization of dimethylsilylethylenediamine oligomers

The detailed characterization of multifunctional hybrid organosilazane/organosilylamine telechelic oligomers by IR and ¹H, ¹³C and ²⁹Si NMR spectroscopy in one and two dimenions has been undertaken. The specific multifunctional oligomers, comprising NH/NH₂ or SiCl functionalities depending on the monomer feed-ratio, were prepared from mono- and di-functionally reacted dichlorodimethylsilane (DDS) and mono-, di-, tri- and tetra-functionally reacted ethylenediamine (EDA). Varying the feed-ratio afforded control of the microstructures of the oligomers and the preparation of oligomers with, in some cases, conterminously located silicon–chlorine (SiCl) groups. The combination of the NMR methods with the IR technique has enabled the detailed microstructural characterization of the oligomers and the identification of the functionalities therein. This approach and the knowledge gained from the DDS/EDA system has been applied to the microstructural characterization of other hybrid organosilazane/silylamine preceramic telechelic oligomers.     

Branched chain discotics Phase structure and orientation behaviour

Studies show that branching the side chains of hexakis(acoyloxy)-benzenes (HAB) and -cyclohexanes (HAChx) does not modify the structure of the discotic mesophase formed. Shear fields appear to act on entire columns, not on individual discs, thereby causing alignment of columns in the shear direction. X-ray diffraction patterns of samples at temperatures between 30°C and 40°C above the clearing temperature provide evidence for the presence of mesophase order.     

On the Causes and Effects of Contaminations during rf Diode Deposition of Cr-Si Alloys

Investigations to the causes and effects of contaminants at the rf diode deposition of CrSi films in a non-heated high vacuum apparatus were carried out comparing an oxygen-free fusion target with an oxygen-containing cermet target. The films of the fusion target contained considerable amounts of oxygen; analogously the oxygen concentration in the films was increased in the case of the cermet target. Moreover, hydrogen was found. The concentration of the contaminants decreased with the sputtering power, however the rate of incorporation increased. For high sputtering rates the contamination process was reproducible and independent of the plant conditioning; the deposited films were depth-homogeneous. The reasons for this behaviour lie in water sources which are activated first of all by the discharge itself. The electrical properties found are explained by the contaminants and the deposition conditions.     

Numerical Study on Population Inversion and Lasing Conditions in an Optically Thick Recombining Helium Plasma

Lasing conditions for He I in a cold recombining helium plasma are numerically discussed including optical thicknesses. A collisional radiative model is used to calculate population densities. We discuss the effect of self absorptions by the background residual gas on the lasing conditions quantitatively. The optical thickness is essential in the calculation and affects the population inversions between level pairs of the singlet state drastically, while those of the triplet state are not affected very much. In the optically thin plasma, the laser lower levels of the singlet state depopulate mainly through radiative transitions. On the other hand, they depopulate mainly through electron collisional deexcitations in the optically thick plasma. Results of the calculations are verified by the spectroscopic observations of an arc-heated magnetically trapped expanding plasma jet generator which we developed. The requirement for the background pressure in which the lasing is possible is discussed quantitatively.     

Molecular addressing? Studies on light-induced reorientation in liquid-crystalline side chain polymers

Polarized light leads to an effective reorientation of the optic axis in the glassy state of liquid-crystalline side chain polymers containing azobenzene mesogenic groups, via a trans-cis and cis-trans isomerization. Using a combination of U V and IR dichroitic studies it is shown for copolymers consisting of chromophores (azobenzene) and non-chromophores (phenylbenzoate) that only the chromophores are reoriented by light as far as the glassy state is concerned. Individual chromophores are thus addressed by photoselection. Photoselection in the fluid nematic state, on the other hand, leads also to a reorientation of the non-chromophores.