Asymmetric Carboxycyanation of Aldehydes by Cooperative AlF/Onium Salt Catalysts: from Cyanoformate to KCN as Cyanide Source

Asymmetric 1,2-additions of cyanide yield enantioenriched cyanohydrins as versatile chiral building blocks. Next to HCN, volatile organic cyanide sources are usually used. Among them, cyanoformates are more attractive on technical scale than TMSCN for cost reasons, but catalytic productivity is usually lower. Here, the development of a new strategy for cyanations is described, in which this activity disadvantage is overcome. A Lewis acidic Al center cooperates with an aprotic onium moiety within a remarkably robust bifunctional Al–F–salen complex. This allowed for unprecedented turnover numbers of up to 10⁴. DFT studies suggest an unexpected unique trimolecular pathway in which the ammonium bound cyanide attacks the aldehyde, which itself is activated by the carbonyl group of the cyanoformate binding to the Al center. In addition, a novel practical carboxycyanation method was developed that makes use of KCN as the sole cyanide source. The use of a pyrocarbonate as carboxylating reagent provided the best results.     

Reactive intermediates in the reaction of hydrazinecarbothioamides with 2-(bis(methylthio)methylene)malononitrile and ethyl 2-cyano-3,3-bis(methylthio)acrylate

Research on Chemical Intermediates - The reaction of N-substituted hydrazinecarbothioamides with both 2-(bis(methylthio)methylene)malononitrile and ethyl 2-cyano-3,3-bis(methylthio)acrylate...     

Carbon-13 kinetic isotope effect of the decarbonylation of oxalic acid

Carbon-13 intramolecular kinetic isotope effects in the decarbonylation of oxalic acid dihydrate of natural isotopic composition by SO₃ and by fuming sulphuric acid at room temperature and decarbonylation of oxalic acid dihydrate by 100% H₃PO₄ in the temperature interval 80–150°C have been determined. The obtained isotopic and kinetic results have been compared with the earlier¹³C experimental and theoretical studies in other solvents.     

Analysis of thermal behaviour of high power semiconductor laser arrays by means of the finite element method (FEM)

New results of steady-state two-dimensional finite-element computations of temperature distributions of high power semiconductor laser arrays are presented. The influence of different thermal loads on the 2D temperature distribution in AlGaAs/GaAs gain-guided laser arrays is investigated. TheFEM model is tested by comparing it with analytical solutions. For numerical convenience, the latter is rewritten in a novel form, which is free of overflow problems. The maximum temperatures calculated by both methods agree within 1%. Several factors determining the thermal resistance of the device are quantitatively examined: the ratio of light emitting to non-emitting areas along the active zone, the amount of Joule losses, the current spreading, the solder thickness, and voids in the solder. This yields design rules for optimum thermal performance.     

Synthesis and properties of niobia films derived from niobium pentaethoxide

The hydrolysis of niobium pentaethoxide precursor in the presence of triethylamine (TEA) is discussed. Three precursors with TEA/Nb(OEt)₅ mole ratios of 0.25, 0.4 and 0.8 were prepared. Niobia colloids with different appearance were obtained after autoclaving the above precursors at 250°C during 12 h. The surface roughness and microstructure of niobia films prepared with the colloids by spread coating method are strongly dependent on the TEA/Nb(OEt)₅ mole ratio. At a value of 0.4 TEA/Nb(OEt)₅ mole ratio, a niobia film with large surface roughness can be achieved. It is opaque and mechanically stable and has differently ordered needle microstructure. The crystalline structure and photoelectrochemical property of niobia film with the largest surface roughness were examined. The effect of CO₂ gas bubbling, reflux and addition of 2-methoxyethanol on the hydrolysis of Nb(OEt)₅ and the nature of the Nb₂O₅ films is also discussed.     

Acid-catalyzed attack of the dinitrogen ligand in thecis-(Me2PhP)4Mo(N2)2 andtrans-(Ph2PCH2CH2PPh2W(N2)2 complexes by nitronium and nitrosonium cations with the formation of nitrogen oxides

The interaction of labeled dinitrogen complexescis-(Me₂PhP)₄Mo(¹⁵N₂)₂ andtrans-(dppe)₂W(¹⁵N₂)₂ with non-labeled nitronium and nitrosonium fluoroborates,¹⁴NO₂BF₄ and¹⁴NOBF₄, in sulfolane at room temperature in the presence of H₂SO₄ results in rapid formation of labeled nitrous and nitric oxides (¹⁵N¹⁴NO,¹⁵NO), as well as¹⁵N¹⁴N. The yield of the products depends on the reagent ratio and reaches 10–20 mol. % per mole of a complex under optimum conditions. The mechanism of the reactions found is proposed. It involves the step of protonation of the dinitrogen ligand to form the corresponding hydrazido(2–) derivatives, which are then attacked by nitronium or nitrosonium cations. In accordance with the mechanism proposed, it was established that the hydrazido(2–) complexes, (Me₂PhP)₃Mo(¹⁵N₂H₂)Cl₂ and (dppe)₂W(¹⁵N₂H₂)Cl₂, are capable of forming¹⁵N¹⁴NO,¹⁵NO, and¹⁵N¹⁴N under the action of¹⁴NO₂BF₄ and¹⁴NOBF₄ in the absence of an acid.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 13–13, July, 1995.     

Speciation of Se,Fe and Zn in Human Milk Whey: The use of Instrumental Neutron Activation Analysis (INAA) to corroborate element profiles measured with Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

In human milk trace elements normally exist in a form which can easily be absorbed by the newborn infant. For investigations of the bioavailability of trace elements it is necessary to carry out a speciation analysis of the elements of interest. An independent analytical method has been used for the quality control of the shape of the element profiles obtained from the speciation analysis of Se, Fe and Zn in individual samples of human milk whey after chromatographic separation. For the element detection in the untreated milk fractions Instrumental Neutron Activation Analysis (INAA) was chosen as the reference method. Element distribution patterns have been obtained with Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) using on-line digestion of the fraction, reduction and hydride formation of Se ("T"-mode). Prior results are compared with those obtained by means of element detection in the untreated fractions ("U"-mode) with ICP-AES. The elution profiles of Se, Fe and Zn in human milk whey obtained by means of ICP-AES detection using the "T"-mode show good agreement with the distribution patterns obtained with INAA. Recoveries of 103% for Fe, 86% for Zn and 87% for Se were obtained. The element distribution patterns of Fe and Zn obtained with ICP-AES speciation using the "T"-mode also show good agreement with those obtained by means of ICP-AES using the "U"-mode.