A double acousto-optic monochromator for the uv region with improved optical characteristics based on a KDP single crystal

A double monochromator is developed and manufactured on the basis of an acousto-optic filter made of a potassium dihydrogen phosphate (KDP) single crystal. The device has an operating range of 260–540 nm and improved optical characteristics: high aperture ratio (an angular aperture of 2° and a linear aperture of 6.5x15 mm), high polarization contrast (～10⁸), and low level of transmission sidelobes (～10³). The spectral resolution of the monochromator at the edges of the operating range is 0.5 and 3 nm, respectively. The control frequency band is 60–150 MHz. Experimentally, it is shown that, for sound beams with equivalent geometric parameters, the diffraction efficiency provided by the KDP-based acousto-optic filter is an order of magnitude higher than that obtained with a noncollinear acousto-optic filter fabricated on the basis of crystalline quartz.     

Accuracy of the chemical data evaluated from one-atom-at-a-time experiments

Studies of chemistry of the transactinoid elements, which are available only as single atoms, by gas (thermo)chromatographic techniques can provide the adsorption enthalpies of the atoms or molecules. These values serve the ultimate goal—to characterize bulk volatility of the species in terms like sublimation enthalpies. The paper attempts an in-depth discussion of the statistical significance of the adsorption enthalpies derived in such experiments. Usually, the counting statistics are very poor and one faces nonstandard problems in evaluating the confidence intervals for the values of parameters. Here, a most efficient way seems to be the Bayesian approach, realized, when necessary, by Monte Carlo simulations of the counting results. Necessarily, the adsorption enthalpy is not evaluated based on the second law of thermodynamics but through accepting an a priori value of the adsorption entropy. More additional assumptions about the mechanisms and parameters involved are needed. This may produce systematic errors in the quantitative conclusions; the analysis of some recent works with elements 106 and 108 corroborates this concern. Despite such problems, it is possible to reveal qualitative differences in the adsorption behavior of a transactinoid and its expected known congeners as well as to use chemistry for an independent assignment of the atomic numbers of transactinoid nuclides.     

Iteration scheme for accelerometer unit calibration by a guaranteeing approach

Methods for accelerometer unit calibration are usually based on sufficiently strict requirements on the knowledge of the gravity orientation with respect to the unit (of the order of fractions of an arc minute). But it is not always possible to know the orientation with such high accuracy. In the present paper, we consider an approach to accelerometer unit calibration for whose implementation it suffices to have rough angular information (of the order of tens of arc minutes). We use a guaranteeing approach to calculate optimal schemes calibration experiments and propose an iterative scheme of calibration.     

Features of light attenuation in crystals under violation of the Bouguer law

A computer simulation and measurements of the light transmittance of germanium and paratellurite crystals of different thickness were used to show that, at scattering probabilities of photons comparable to their absorption probabilities, the standard methods for calculating light extinction coefficients on the basis of the Bouguer law lead to rough errors in estimation of the optical quality of a material.     

Modeling of the defect structure in dislocation-free silicon single crystals

A mathematical model of the formation of primary grown-in microdefects on the basis of dissociation diffusion is presented. Cases of “vacancy-oxygen” (V + O) and “carbon-interstitial” (C + I) interaction near the crystallization front are considered for dislocation-free Si single crystals grown by the floating-zone and Czochralski methods. The approximate analytical expressions obtained by setting 1D and 2D temperature fields in a crystal are in good agreement with the heterogeneous mechanism of formation of grown-in microdefects.     

Similar quartz crystallographic textures in rocks of continental earth’s crust (by neutron diffraction data): II. Quartz textures in monophase rocks

The types of quartz textures found in a large collection of multiphase rocks from different regions of the earth are analyzed. Crystallographic textures of granulite, amphibolite, slate, and gneiss samples are measured, classified, and compared with the similar textures of monomineral rocks.     

Complexity of self-similar hierarchically constrained ensembles

The complexity measure of the infinite set of self-similar hierarchically constrained ensembles is determined in the framework of the generalized combinatory approach. It is shown that, as the hierarchical coupling increases, the complexity increases to a value that decreases with increasing the dispersion of this coupling and with decreasing the branching degree of the hierarchical tree.     

Shapes of a rotating rheonomic rod

The case of a rotating fluid mass is one of the classical fields of mechanics [1]. In particular, the solution of creep problems for a rotating mass is actual in geophysics in connection with Earth gravity force simulation on rotating samples under laboratory conditions [2]. A special case of a rheonomic rod in a potential field was studied in [3], where it was shown that the main problem about the rod shapes is the problem of determining the relations between the Lagrangian and Euler coordinates in the creep process.In what follows, we show how this problem can be solved for a rotating rod.     

Thermoelastoplastic deformation of a thick-walled cylinder with a radial crack

The thermoelastoplastic fracture mechanics problem of a thick-walled cylinder subjected to internal pressure and a nonuniform temperature field is solved by the method of elastic solutions combined with the finite-element method. The correctness of the solution is provided by using the Barenblatt crack model, in which the stress and strain fields are regular. The elastoplastic problem of a cracked cylinder subjected to internal pressure and a nonuniform temperature field are solved. The calculation results are compared with available data. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 49, No. 3, pp. 173–183, May–June, 2008.