Selective surface reactions for Janus ORMOSIL particles with multiple functional groups using an ordered monolayer film at liquid-liquid interface

Monodispersed, submicron-sized Janus ORMOSIL particles with multiple functional groups were prepared by the selective surface reaction of a monolayer film formed at a hexane-water interface. A well-ordered monolayer film was obtained by self-assembly of ORMOSIL particles with multiple functional groups at hexane-water interface. The photopolymerization of an ordered monolayer containing ORMOSIL particles yields a rigid film strong enough to maintain its integrity for transfer and further chemical reaction. The chemical reaction of this ordered film with organic and inorganic functional groups produced Janus ORMOSIL particles with multiple functional groups. The morphologies, structures, and chemical compositions of monolayer films and Janus ORMOSIL particles were characterized by FT-IR, solid state NMR, X-ray diffraction (XRD), optical microscopy (OM), electron microscopies (SEM and TEM), and confocal laser scanning microscopy.     

Development of a peptide inhibitor-based cantilever sensor assay for cyclic adenosine monophosphate-dependent protein kinase

A highly sensitive nanomechanical cantilever sensor assay based on an electrical measurement has been developed for detecting activated cyclic adenosine monophosphate (cyclic AMP)-dependent protein kinase (PKA). Employing a peptide derived from the heat-stable protein kinase inhibitor (PKI), a magnetic bead system was first selected as a vehicle to immobilize the PKI-(5-24) peptide for capturing PKA catalytic subunit and the activity assay was applied for indirectly assessing the binding. Synergistic interactions of adenosine triphosphate (ATP) and the peptide inhibitor with the kinase were then investigated by a solution phase capillary electrophoretic assay, and by surface plasmon resonance technology which involved immobilization of the peptide inhibitor. After systemically evaluated by a homogeneous direct binding assay, the ATP-dependent recognition of the catalytic subunit of PKA by PKI-(5-24) was successfully transferred on to the nanomechanical cantilevers at protein concentrations of 6.6 pM-66 nM, exhibiting much higher sensitivity and wider dynamic range than the conventional activity assay. Thus, direct assessment of activated kinases using the cantilever sensor system functionalized with specific peptide inhibitors holds great promise in analytical applications and clinical medicine.     

Application of ionic liquid halide nucleophilicity for the cleavage of ethers: a green protocol for the regeneration of phenols from ethers

We have used the high nucleophilicity of bromide ion in the form of the ionic liquid, 1-n-butyl-3-methylimidazolium bromide ([bmim][Br]), for the nucleophilic displacement of an alkyl group to regenerate a phenol from the corresponding aryl alkyl ether. Using 2-methoxynaphthalene (1) as a model compound, we found that the combination of ionic liquid [bmim][Br] and p-toluenesulfonic acid with warming effected demethylation in 14 h, affording the desired product 2-naphthol (2) in good yield (97%). Various other protic acids (MsOH, hydrochloric acid (35%), dilute sulfuric acid (50%)) could be used as a proton source in this demethylation reaction. Under the same conditions, cleavage of alkyl alkyl ether 2-(3-methoxypropyl)naphthalene yielded mixture of corresponding 2-(3-bromopropyl)naphthalene and 2-(3-hydroxypropyl)naphthalene. Dealkylation of various aryl alkyl ethers could also be achieved using significantly reduced (i.e., stoichiometric) amounts of concentrated hydrobromic acid (47%) in the ionic liquid. Both procedures afforded the desired products in moderate to good yield; however, cleavage of aryl alkyl cyclic ether, 2,3-dihydrobenzofuran, resulted in low yield of the desired product o-2-bromoethylphenol. The convenience of this method for ether cleavage and its effectiveness using only a moderate excess of hydrobromic acid make it attractive as a green chemical method.     

Gold Nanorod–Photosensitizer Complex Obtained by Layer‐by‐Layer Method for Photodynamic/Photothermal Therapy In Vitro

Gold nanorod (GNR)–photosensitizer (PS) complex was prepared using anionic PS (sodium salt of purpurin‐18) and cationic poly(allylamine hydrochloride) by layer‐by‐layer method, and was characterized by transmission electron microscopy, UV‐vis spectroscopy, and zeta potential. The GNR–PS complex is a promising agent for synergistic (photothermal and photodynamic) therapy (PTT/PDT), in which PTT generates heat as well as operates the PS release which maximize the following PDT activity. The combined dual therapy, PTT followed by PDT, exhibits a significantly higher photocytotoxicity result based on synergistic effect of hyperthermia from PTT as well as singlet oxygen photogeneration from PDT.     

Tuning the Redox Properties of a Nonheme Iron(III)–Peroxo Complex Binding Redox‐Inactive Zinc Ions by Water Molecules

Redox‐inactive metal ions play important roles in tuning chemical properties of metal–oxygen intermediates. Herein we report the effect of water molecules on the redox properties of a nonheme iron(III)–peroxo complex binding redox‐inactive metal ions. The coordination of two water molecules to a Zn²⁺ ion in (TMC)Fe^III‐(O₂)‐Zn(CF₃SO₃)₂ ( 1 ‐Zn²⁺) decreases the Lewis acidity of the Zn²⁺ ion, resulting in the decrease of the one‐electron oxidation and reduction potentials of 1 ‐Zn²⁺. This further changes the reactivities of 1 ‐Zn²⁺ in oxidation and reduction reactions; no reaction occurred upon addition of an oxidant (e.g., cerium(IV) ammonium nitrate (CAN)) to 1 ‐Zn²⁺, whereas 1 ‐Zn²⁺ coordinating two water molecules, (TMC)Fe^III‐(O₂)‐Zn(CF₃SO₃)₂‐(OH₂)₂ [ 1 ‐Zn²⁺‐(OH₂)₂], releases the O₂ unit in the oxidation reaction. In the reduction reactions, 1 ‐Zn²⁺ was converted to its corresponding iron(IV)–oxo species upon addition of a reductant (e.g., a ferrocene derivative), whereas such a reaction occurred at a much slower rate in the case of 1 ‐Zn²⁺‐(OH₂)₂. The present results provide the first biomimetic example showing that water molecules at the active sites of metalloenzymes may participate in tuning the redox properties of metal–oxygen intermediates.     

Effects of nitrogen composition on the resistivity of reactively sputtered TaN thin films

Nanocrystalline tantalum nitride (TaN) thin films have been deposited by reactive direct current magnetron sputtering technique on Si/SiO₂ (100) substrate with nitrogen flow rate ranging from 0, 3, 5, 7, 9 to 11 standard cubic centimeter per minute (sccm). Structural properties, surface morphology, chemical composition and and resistivity of the TaN films were investigated by X‐ray diffraction (XRD), field emission scanning electron microscopy, X‐ray photoemission spectroscopy (XPS) and four‐point probe measurements, respectively. In the XRD spectra, a classical formation sequence of tantalum nitride phases in the order of Ta‐Ta₂N‐TaN‐Ta₄N₅ and decreasing amount of metallic Ta were observed with increasing nitrogen flow. The electrical resistivity of the TaN film was found to increase with increasing N/Ta ratio as a result of the increased electron scattering from interstitial N atoms. In the XPS analysis, two groups of Ta4f doublets relating to different TaN phases were observed in the core level spectra of TaN films. No strong coupling was observed between the Ta4f doublets and the Ta4p and the N1s groups. The appropriate nitrogen flow was believed to be helpful in the bonding and formation of stoichiometric TaN. Copyright © 2014 John Wiley & Sons, Ltd.     

Low-temperature adsorption/storage of hydrogen on FAU, MFI, and MOR zeolites with various Si/Al ratios: effect of electrostatic fields and pore structures

Several zeolites, such as faujasite, mordenite, and ZSM-5, with various aluminum contents have been used to analyze the effect of aluminum or cation concentration (strength of electrostatic field) on hydrogen adsorption at low temperature. Irrespective of the zeolite structure, the adsorption capacity, isosteric heat of adsorption (-DeltaHads), surface coverage, and micropore occupancy increase with increasing aluminum content of a zeolite. Zeolites with a higher amount of aluminum favorably adsorb hydrogen at relatively low pressures. For zeolites with similar aluminum contents, the adsorption capacity, isosteric heat of adsorption, surface coverage, and micropore occupancy are in the order of mordenite>ZSM-5>faujasite, probably due to differing pore sizes and the presence or absence of pore intersections. This work demonstrates that zeolites with strong electrostatic fields and narrow pores without intersections are beneficial for high hydrogen uptake.     

Cyclic and acyclic S2O2 donor-type ionophores. Ion-pair extraction and transport of Ag(I) picrate, and X-ray confirmation of existence of the ion-pair complex

Extraction and transport behaviors of isomeric oxathia macrocycles (L₂, ortho-; L₃, meta- and L₄, para-isomer) and their structure related open-chain compound (L₁) towards Ag(I) picrate have been examined. From the plot of log (D_Ag(I)/[pic⁻]) vs. log [L]₀ for all of the ionophores were linear with slope near unity, thereby confirming the 1:1:1 complex formations of Ag(I)/ligand/picrate ion to be extracted into the dichloromethane phase. The extractability of an acyclic ionophore was superior to those of the corresponding cyclic ones. In membrane transport experiments, the slow rate of release of Ag(I) from the membrane into the receiving phase seems to be responsible for lower transport efficiency. Upon addition of sodium thiosulfate as a stripping reagent in receiving phase, the efficiency of transport is significantly enhanced in the order of L₁ (acyclic)>L₂ (ortho-)>L₃ (meta-)>L₄ (para-) in accordance with those of log K_ex values. It is hypothesized that the ion-pair complexation of L₁ in extraction step would be more favorable in extraction and transport of Ag(I). Its structure have been confirmed by X-ray diffraction analysis of [Ag(L₁)pic], where L₁=1,10-bis(mercaptobenzylyl)-4,7-dioxadecane.     

Nano-sized lithium manganese oxide dispersed on carbon nanotubes for energy storage applications

Nano-sized lithium manganese oxide (LMO) dispersed on carbon nanotubes (CNT) has been synthesized successfully via a microwave-assisted hydrothermal reaction at 200 °C for 30 min using MnO₂-coated CNT and an aqueous LiOH solution. The initial specific capacity is 99.4 mAh/g at a 1.6 C-rate, and is maintained at 99.1 mAh/g even at a 16 C-rate. The initial specific capacity is also maintained up to the 50th cycle to give 97% capacity retention. The LMO/CNT nanocomposite shows excellent power performance and good structural reversibility as an electrode material in energy storage systems, such as lithium-ion batteries and electrochemical capacitors. This synthetic strategy opens a new avenue for the effective and facile synthesis of lithium transition metal oxide/CNT nanocomposite.     

Compatibility and fungal degradation of poly[(R)-3-hydroxybutyrate]/aliphatic copolyester blend

Poly[(R)-3-hydroxybutyrate] (PHB) was blended with an aliphatic copolyester, which was synthesized by the esterification of adipic acid, ethylene glycol, and lactic acid. The blend showed a single T_g, which varied systematically but convexly upwards with the composition. The growth rate of PHB spherulites, the crystallization temperature, and the equilibrium melting temperature of the blend were decreased as the amount of the copolyester was increased. Therefore, the blend system was determined to be compatible. However, the degree of crystallinity, and the enthalpies of crystallization and fusion of PHB in the blend remained almost constant, regardless of the compositional change, although the crystallization rate was decreased upon blending. No chemical change such as transesterification was observed as a result of the blending, yet there was a slight change in the crystalline morphology of PHB. The rate of fungal degradation was lowered with an increase in the copolyester content of the blend. © 1996 John Wiley & Sons, Inc.