无衍射光的干涉实验与理论分析

分析了两束无衍射光的干涉场分布形式和干涉条纹轨迹。将一束单色光入射两小孔产生的两束相干光照射轴锥镜,在轴锥镜后将产生两束无衍射光。根据单束倾斜光入射轴锥镜的无衍射理论,分析出这两束无衍射光产生的干涉场为每束无衍射光的无衍射场的线性叠加。利用零阶贝塞尔函数的零点公式,推导出两束无衍射光的干涉条纹的轨迹为双曲线。计算结果表明,干涉场中两中心的间距与两孔实际的间距和干涉场距轴锥镜的距离成正比。实验结果与理论仿真相一致。     

毛细管电泳法快速测定复方地芬诺酯片中的地芬诺酯和阿托品

建立了毛细管电泳高频电导法同时测定地芬诺酯和阿托品的方法。探讨了缓冲溶液、有机溶剂添加剂、分离电压和进样条件以及毛细管内径和长度等因素对分离检测的影响。在电泳介质为10.0mmol/L乳酸-15.0?H5OH、分离电压20.0kV的优化条件下,6min内即可实现地芬诺酯和阿托品的同时分离检测,线性范围分别为5.00~500和2.00~320mg/L;检出限分别为3.0和1.0mg/L。     

Graphene-Oxide-Based Fluoro- and Chromo-Genic Materials and Their Applications

Composite materials and their applications constitute a hot field of research nowadays due to the fact that they comprise a combination of the unique properties of each component of which they consist. Very often, they exhibit better performance and properties compared to their combined building blocks. Graphene oxide (GO), as the most widely used derivative of graphene, has attracted widespread attention because of its excellent properties. Abundant oxygen-containing functional groups on GO can provide various reactive sites for chemical modification or functionalization of GO, which in turn can be used to develop novel GO-based composites. This review outlines the most recent advances in the field of novel dyes and pigments encompassing GO as a key ingredient or as an important cofactor. The interactions of graphene with other materials/compounds are highlighted. The special structure and unique properties of GO have a great effect on the performance of fabricated hybrid dyes and pigments by enhancing the color performance of dyes, the anticorrosion properties of pigments, the viscosity and rheology of inks, etc., which further expands the applications of dyes and pigments in dyeing, optical elements, solar-thermal energy storage, sensing, coatings, and microelectronics devices. Finally, challenges in the current development as well as the future prospects of GO-based dyes and pigments are also discussed. This review provides a reference for the further exploration of novel dyes and pigments.     

Preliminary study on aerosol particle addition calibration method for on-line quantitative analysis of airborne radioactive particles with ICP-MS

An ambient aerosol concentration enrichment system coupled with ICP-MS for real-time monitoring of airborne radioactive particles is now under development. ICP-MS is very sensitive to sample introduction conditions, so it is necessary to develop an easy-use calibration method for on-line quantitative analysis in field application. In this paper, a calibration method using standard solution instead of monodisperse particles was established and validated preliminarily. First of all, four parameters for the method were determined experimentally, including: uptake flow rate and nebulisation efficiency of the Microconcentric nebuliser, nebulisation/transport efficiency of Aridus Desolvating Sample Introduction System, and Relative Sensitivity Factor between ¹⁵⁹?Tb and ¹⁷⁴?Yb. Then, monodisperse terbium nitrate particles were generated by a commercial Vibrating Orifice Aerosol Generator. Continuous aerosols of ytterbium nitrate droplets were nebulised from standard solution. They were mixed together, desolvated through the membrane dryer and introduced into ICP-MS for on-line analysis of terbium nitrate particles. The air sampled from nuclear environment was also introduced into ICP-MS to investigate the effect of flow rate on instrument responses. Finally, atom numbers of ¹⁵⁹?Tb in discrete terbium nitrate particles were determined using the calibration method and compared to the calculated value. Results show that when air flow rate increase from 10?mL?min^?1 to 100?mL?min^?1, the ratio of ¹⁵⁹?Tb ion count to ¹⁷⁴?Yb ion intensity keeps constant although instrument sensitivity decreases by a factor of 25. The relative standard deviation of ¹⁵⁹?Tb atom number measured is better than 18%. The discrepancy with the calculated value could be attributed to the over-estimation of atom number in the particles generated by VOAG because there was some liquid leakage in the VOAG.     

One-pot synthesis of benzylacetamide from oxime under ultrasound irradiation

One-pot synthesis of benzylacetamide from oxime can be carried out in 80–95% yield at 35–40 °C under ultrasound irradiation. This method provided several advantages such as simple work-up procedure, shorter reaction time and higher yield.     

Structure and magnetic properties of Nb-doped FeZrB soft magnetic alloys

Structure and magnetic properties of Nb-doped (FeZrB)_100−xNb_x alloy are investigated by X-ray diffraction (XRD), differential scanning calorimetry and vibrating sample magnetometer. The fully amorphous structure of the as-quenched ribbons is confirmed by the XRD pattern. With increasing Nb, the glass transition temperature and the onset crystallization temperature are increased, indicating increased stability of the amorphous structure. For x=1, the saturation magnetization of the ribbons is 125.7 emu/g and the optimized annealing temperature increases from 550 to 630 °C. The morphology of the crystallized phases is observed by scanning electron microscopy. The results show that nanocrystalline α-Fe grains are dispersed in the amorphous matrix.     

Characterization of microstructures induced in the workpiece of aluminum alloy by excimer laser micromachining

Excimer laser emitting at 248 nm is applied to produce microstructures on the surface of aluminum alloy. The surface morphology shows that hotspots and thermal fluidic structures both come to light. Two possible mechanisms of hotspots formation are proposed: near-field diffraction and interference, and extremely fast rapid thermal annealing. And for the formation of thermal fluidic pattern structure, a thin film model is applied.     

飞秒激光激发空气电离的阈值研究

报道在脉宽50fs—22ps，波长800nm脉冲激光作用下的空气电离阈值的研究结果.利用探测等离子体发光信号的方法，实验测量了激发空气电离所需的阈值激光强度.结果表明，当激光脉冲宽度从50fs增加到22ps时，阈值光强I_th从8.7×10¹⁴W/cm²下降到2.7×10¹³W/cm²；I_th经历了由迅速降低逐渐发展为缓慢降低的过程.在50fs—1p     

On thek dimensional Piatetski-Shapiro prime number theorem

Thek-dimensional Piatetski-Shapiro prime number problem fork⩾3 is studied. Let π(x ₁ c ₁,⋯,c _k ) denote the number of primesp withp⩽x, , where 1<c ₁<⋯<c _k are fixed constants. It is proved that π(x;c ₁,⋯,c _k ) has an asymptotic formula ifc ₁ ⁻¹ +⋯+c _k ⁻¹ >k−k/(4k ²+2). Project supported by the National Natural Science Foundation of China (Grant No. 19801021) and the Natural Science Foundation of Shandong Province (Grant No.Q98A02110).