金属配合物(pq)_2Ir(N-phMA)发光材料的合成及光谱性质

设计出一种酰胺类金属铱有机配合物磷光电致发光材料,该材料是以2-苯基喹啉(pq)为主配体,N-苯基甲基丙烯酰胺(N-phMA)为辅助配体的金属配合物(pq)2Ir(N-phMA)。该化合物的结构由核磁,红外表征确定,它在586nm处的强荧光发射,表明它是一种可用于OLED的黄光发光材料。     

Ferromagnetism of MnxLiyZn1−x−yO films

We had prepared Mn-doped ZnO and Li, Mn codoped-ZnO films with different concentrations using spin coating method. Crystal structure and magnetic measurements demonstrate that the impurity phases (ZnMnO₃) are not contributed to room temperature ferromagnetism and the ferromagnetism in Mn-doped ZnO film is intrinsic. Interesting, saturated magnetization decreases with Mn or Li concentration increase, showing that some antiferromagnetism exists in the samples with high Mn or Li concentration. In addition, Mn_0.05Zn_0.95O film annealed in vaccum shows larger ferromagnetism than the as-prepared sample and more oxygen vacancies induced by annealing in reducing atmosphere enhance ferromagnetism, which supports the bound magnetic polaron model on the origin of room temperature ferromagnetism.     

Phase dependent photoluminescence and energy transfer in Ca2P2O7: Eu2+, Mn2+ phosphors for white LEDs

α- and β-Ca₂P₂O₇: Eu²⁺, Mn²⁺ phosphors were prepared by solid-state reaction. Phase transition from tetragonal (β-phase) to monoclinic (α-phase) is performed. A strong orange emission of Mn²⁺ is observed in both α-and β-Ca₂P₂O₇: Eu²⁺, Mn²⁺ upon near ultraviolet (UV) excitation through energy transfer from Eu²⁺ to Mn²⁺. The transfer efficiencies for various Mn²⁺ concentrations are estimated based on lifetime measurements of the fluorescence of Eu²⁺ in the two phases. The photoluminescence excitation spectra of α-Ca₂P₂O₇: Eu²⁺, Mn²⁺ can cover 400 nm of the near-UV range, denoting its potential use as a phosphor with intense orange component for white light emitting diodes (LEDs).     

Luminescent properties of R doped Sr2SiO4:Eu(R=Li, Na and K) red-emitting phosphors for white LEDs

Sr₂SiO₄:Eu³⁺ and Sr₂SiO₄:Eu³⁺ doped with R⁺(R⁺=Li⁺, Na⁺ and K⁺) phosphors were prepared by conventional solid-state reaction and investigated by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and photoluminescence spectroscopy. XRD patterns and SEM reveal that the optimal firing condition for Sr₂SiO₄:Eu³⁺ was 1300 °C for 4 h. The excitation and emission spectra indicate that the phosphor can be effectively excited by ultraviolet (395 nm) and blue (466 nm) light and emits intense red light peaked at around 614 nm corresponding to the ⁵D₀→⁷F₂ transitions of Eu³⁺. In the research work, the effect of R⁺ contents on luminescence property and the Eu³⁺ concentration quenching process have also been investigated. The Eu³⁺ concentration quenching mechanism was verified to be a multipole-multipole interaction and the critical energy-transfer distance was calculated to be around 14.6 Å. The dopant R⁺(R⁺=Li⁺, Na⁺ and K⁺) as charge compensator in Sr₂SiO₄:Eu³⁺ can further enhance luminescence intensity, and the emission intensity of Sr₂SiO₄:Eu³⁺ doping Li⁺ is higher than that of Na⁺ or K⁺.     

TWO POSITIVE SOLUTIONS FOR A CLASS OF SINGULAR BOUNDARY VALUE PROBLEMS

An existence theorem of two positive solutions of the singular BVP1/(p(t))(p(t)y′(t))′+λα(t)f(y(t))=0,t∈(0,1),αy(0)-βp(t)y′(t)=0=γy(1)+δp(t)y′(t)was established by using topological degree theory.     

高掺镁LiNbO3晶体折射率温度系数的表示式

推导了掺５ｍｏｌ％ＭｇＯ的ＬｉＮｂＯ３晶体折射率温度系数的表示式。利用这些表示式可以计算２９３～４２８Ｋ温度和０．５３９８μｍ～１．３４１４μｍ波长范围内的折射率温度系度，结果表明：计算值和实验值的最大相对偏差是１２％，用具有最大相对偏差的折射率温度系数的计算值，计算１．０７９５μｍ波长的非临界相位匹配温度，其值为３８２．４Ｋ，它与实验值仅差６Ｋ。因此，本文得到的表示式，对于采用这种晶体，设计在上     

置换群关于变换后基的强生成集的算法

本文给出置换群关于变换后的基的强生成集的一种算法及其理论证明,并讨论了既约强生成集和最小强生成集的问题。     

kHz激光器在武汉卫星观测站的测距实验

高重复频率激光器是kHz卫星激光测距系统的重要组成部分,提高激光发射频率可以有效地获得更多的观测数据,这是当今卫星激光测距领域的发展方向.针对武汉卫星观测站进行的kHz激光测距实验,介绍了kHz激光器的工作过程和原理,分析了影响高重复频率回波探测的因素.实验结果表明:对实验过程中所观测到的中低轨卫星,观测数据量提高了1...     

烧结烟气脱硫脱硝用活性炭混合钢渣复合材料的光谱学分析

钢渣是冶金工业中产生的主要固体废弃物,其产量约为每年粗钢产量的15%~20%。由于技术的局限,导致我国钢渣利用率较低,仅为年钢渣产量的10%,同时加之管理制度的不健全,导致钢渣大量露天堆放,对土地资源、地下水源,以及空气质量形成严重影响。固体废弃物再利用是资源可持续发展的重要途径之一,钢渣的主要化学成分为CaO, SiO2, Al2O3, MgO, Fe2O3, MnO, f-CaO等。面对上述问题,利用冶金固体废弃物与活性炭开发一种价格低廉且性能优越的活性炭混合钢渣复合材料,既是冶金固体废弃物的高附加值利用与资源可持续发展的重要途径之一,也是大幅降低改性活性炭生产成本与提高经济效益的重要途径之一。该研究创新性以活性炭与钢渣为研究对象,利用钢渣中含有的金属氧化物对活性炭进行改性处理制备用于烧结烟气脱硫脱硝的活性炭混合钢渣复合材料,通过搭建实验反应装置对活性炭混合钢渣复合材料的脱硫脱硝性能进行测试。利用X射线荧光光谱仪(XRF)对钢渣的化学成分进行测试与分析,比表面积及孔径测定仪(BET)对活性炭混合钢渣复合材料的孔结构进行测试与分析,傅里叶变换红外光谱仪(FTIR)对钢渣的结构组成进行测试与分析,扫描电子显微镜(SEM)对活性炭混合钢渣复合材料的微观结构进行测试与分析,以揭示活性炭与钢渣制备活性炭混合钢渣复合材料的机理,以及活性炭混合钢渣复合材料对烧结烟气脱硫脱硝的机理。结果表明:当钢渣为电炉热泼渣、钢渣与活性炭质量比为2∶4、钢渣与活性炭细度为400目时,活性炭混合钢渣复合材料具有良好的脱硫脱硝性能与合理的经济性,即脱硫效率为100%、脱硝效率为58%。活性炭混合钢渣复合材料具有的多孔结构对SO2和NO进行有作用,钢渣中Fe2O3与MnO2促使活性炭官能团进行催化还原反应提高脱硫脱硝性能,其中吸附作用是主导与前提,催化还原反应是辅助与协同。以期为高附加值的钢渣利用提供新途径,实现钢铁企业以废治废、以废增效的目的。