Vertically Grown Few-Layer MoS2 Nanosheets on Hierarchical Carbon Nanocages for Pseudocapacitive Lithium Storage with Ultrahigh-Rate Capability and Long-Term Recyclability

Molybdenum disulfide (MoS₂) is an intensively studied anode material for lithium-ion batteries (LIBs) owing to its high theoretical capacity, but it is still confronted by severe challenges of unsatisfactory rate capability and cycle life. Herein, few-layer MoS₂ nanosheets, vertically grown on hierarchical carbon nanocages (hCNC) by a facile hydrothermal method, introduce pseudocapacitive lithium storage owing to the highly exposed MoS₂ basal planes, enhanced conductivity, and facilitated electrolyte access arising from good hybridization with hCNC. Thus, the optimized MoS₂/hCNC exhibits reversible capacities of 1670 mAh g⁻¹ at 0.1 A g⁻¹ after 50 cycles, 621 mAh g⁻¹ at 5.0 A g⁻¹ after 500 cycles, and 196 mAh g⁻¹ at 50 A g⁻¹ after 2500 cycles, which are among the best for MoS₂-based anode materials. The specific power and specific energy, which can reach 16.1 kW and 252.8 Wh after 3000 cycles, respectively, indicate great potential in high-power and long-life LIBs. These findings suggest a promising strategy for exploring advanced anode materials with high reversible capacity, high-rate capability, and long-term recyclability.     

Isomerization of Secondary Phosphirane into Terminal Phosphinidene Complexes: An Analogy between Monovalent Phosphorus and Transition Metals

Secondary phosphirane complexes isomerize above 100 °C to give the corresponding terminal phosphinidene complexes, which can be trapped by alkenes and alkynes. This reaction is a rare instance of the isomerization of a P^III derivative into a P^I derivative. It appears to mimic the reductive elimination of alkanes from transition‐alkylmetal hydrides.     

Altering the Position of Phenyl Substitution to Adjust Film Morphology and Memory Device Performance

In this study, two structural isomers α‐PBT and β‐PBT, which only differ in the phenyl substituent position on the quinoline chromophore, have been designed and successfully synthesized. The influences of substituent position on the film morphology and the storage performance of the devices were investigated. Both molecules employed in the memory devices exhibited same nonvolatile binary (write‐once‐read‐many‐times; WORM) characteristics, but the switch threshold voltage (Vth) of the β‐PBT‐based device was clearly lower than that of the α‐PBT‐based device. Simulation results demonstrate that the variation of the phenyl substituent position led to different intermolecular stacking styles and thus to varied grain sizes for each film morphology. This work illustrates that altering the phenyl substituent position on the molecular backbone could improve the quality of the film morphology and reduce power consumption, which is good for the rational design of future advanced organic memory devices (OMDs).     

Neutral 1D Perovskite-Type ABX3 Phase Transition Material with a Narrowband Emission and Semiconductor Property

Cyclic organic amines are emerging as excellent building blocks to assemble organic–inorganic hybrid phase transition materials due to their flexible cyclic structure. Here, we have assembled a 1D organic-inorganic hybrid dielectric material C₅H₆NOPbBr₃ ( 1 ) by alloying the cyclic organic amine 3-hydroxypyridine. 1 displays a remarkable switchable dielectric response induced by an order-disorder transformation of the organic moiety, this transformation behaviour is confirmed by DSC and Hirshfeld surface measurements. More interestingly, 1 has a narrowband emission (FWHM=4.64 nm) at 590 nm; FWHM is a major quality figure for narrowband photodetectors. In addition, 1 exhibits semiconducting properties with an indirect bandgap of 2.78 eV by the analysis of the UV-Vis absorption results.     

Theoretical study of the structural and energetic properties of platinum clusters with up to 60 atoms

Structural Chemistry - Applying a theoretical approach that combines an efficient and fast global optimization based on genetic algorithms (GA) to search in structure space and the parameterized...     

An efficient synthesis of 3,4-dihydropyrimidin-2(1<Emphasis Type="Italic">H</Emphasis>)-one and 5,6-diphenylpyrimidine derivatives under solvent-free and base conditions

An efficient and convenient Biginelli-like reaction one-pot synthesis of a series of 4-aryl-5,6-diphenyl-3,4-dihydropyrimidin-2(1H)-one and 4-aryl-5,6-diphenylpyrimidine derivatives under solvent-free conditions from the reaction of aromatic aldehydes, 1,2-diphenylethanone, urea, guanidine carbonate or acetamidine hydrochloride has been reported. This methodology has the advantages of short reaction time, mild reaction conditions, easy work-up and environmental friendliness. Moreover, 4-aryl-5,6-diphenylpyrimidine derivatives were first reported in this process. The structures of the title compounds were further determined by X-ray diffraction. More importantly, different from general Biginelli reaction, this reported method was carried out under base conditions.     

Synthesis of TiO<Subscript>2</Subscript> nanotubes using different alkaline media and their applications in photocatalysis and DSSCs

TiO₂ nanotubes (TNTs) were successfully synthesized from different alkaline media (i.e., NaOH and KOH) by using a microwave hydrothermal process. The effects of different alkaline media on the formation of TiO₂ nanotubes and their physicochemical properties were investigated. The phases of different TiO₂ nanostructures were studied by using X-ray diffraction patterns. Morphologies of the nanostructures were observed with a transmission electron microscope. The optical properties of the nanostructures were evaluated through the absorption behavior using UV–Vis diffuse reflectance spectroscopy. The photocatalytic activities of the TiO₂ nanostructures were evaluated by the degradation of methylene blue aqueous dye solution under the simulated solar light irradiation. Similarly, the photovoltaic efficiencies of the prepared samples were investigated by making photo-anode layers in the Dye Sensitized Solar Cells (DSSCs). The results revealed that in comparison to the single layered TiO₂ nanostructures in the DSSC, creation of a double layer structure significantly enhanced the efficiency of DSSC.     

Ultrasensitive amperometric determination of PSA based on a signal amplification strategy using nanoflowers composed of single-strand DNA modified fullerene and Methylene Blue,and an improved surface-initiated enzymatic polymerization

The authors describe a signal amplification strategy for highly sensitive detection of the prostate-specific antigen (PSA). This is accomplished by a combination of two methods, viz. (a) improved surface-initiated enzymatic polymerization (SIEP), and (b) the use of nanoflowers prepared from C₆₀ fullerene and Methylene Blue (C₆₀/MB) modified with a long single-strand DNA. C₆₀/MB acts as a novel electrochemical indicator. The C₆₀/MB nanoflowers improve the load of MB and promote the electron transfer. The integration of the SIEP technique and the C₆₀/MB nanomaterial also results in improved loading of MB on the nucleic acid. Ultimately, dual cascade signal amplification is accomplished. The biosensor was constructed as follows: (a) Gold nanospheres were modified with antibody 2 (Ab₂) and a thiolated oligonucleotide (referred to as S₀). (2) S₀ is then extended by the SIEP reaction. (3) The redox indicator C₆₀/MB is then connected to the extended guanine-rich ssDNA which then yields the amperometric signal. (4) A sandwich immunoassay is performed by capturing the nanoprobe oy type Ab₂-Au-S₀ on the gold electrode modified with multi-walled carbon nanotubes (MWCNTs) and protein A. Current is measured by using differential pulse voltammetry (DPV). The synergic effect of the biofunctional nanomaterial and the signal amplification strategy greatly improves the performance of this immunoassay. Under optimized conditions and at a working voltage of typically ?0.18 V (vs Ag/AgCl), the assay has a linear range that extends from 15 pg·mL^?1 to 8 ng·mL^?1 of PSA. The detection limit is as low as 1.7 pg·mL^?1 (at an S/N ratio of 3). In our perception, this dual amplification scheme has a wide scope in that it may become applicable to numerous other immunoassays.

Open image in new window

Graphical abstract C₆₀/Methylene blue nanoflowers, a novel electrochemical indicator, connect with the long single-stranded DNA (ssDNA) extended by the improved surface-initiated enzymatic polymerization method. This amplification strategy is utilized to construct a sandwich prostate-specific antigen (PSA) immunosensor.

     

Encapsulation of RNA by negatively charged human serum albumin via physical interactions

Human serum albumin (HSA) is the most abundant plasma protein and has an inherent ability to target tumor cells. It is an excellent candidate for drug delivery. However, HSA cannot form complex with DNA or RNA, because it is negatively charged under physiological conditions. In this work, we reported a simple method to prepare HSA/RNA nanoparticles mainly by physical interaction. Firstly, the solution pH is adjusted to 4.0, under which condition HSA is positively charged. It forms complex with RNA via electrostatic interaction. The solution is then heated at 75 oC for 15 min to stabilize the structure and the size of the formed complex. The HSA/RNA nanoparticle prepared by this method has a diameter about 110 nm and a narrow distribution. It is also stable for days under physiological conditions. Cellular essays demonstrate that these particles exhibit a high cellular uptake efficiency and non-toxicity to HeLa cells.