微波频率下Ba0.5Sr0.5TiO3薄膜的介电特性随温度及外加偏压变化的检测

提出了一种新的结构来表征钛酸锶钡薄膜在微波频率下的介电特性,即在沉积有钛酸锶钡薄膜的氧化镁基片上制作了共面带阻滤波器.借助于共面带阻滤波器的谐振频率和Q值,通过比较其测量值与仿真值,可以得出钛酸锶钡薄膜的介电常数和介电损耗.在变温测试过程中,注意到金导电层的电导率对带阻滤波器的谐振频率和Q值有较大的影响.为了准确地得到钛酸锶钡薄膜的介电特性,仔细分析了金导电层对带阻滤波器频率响应曲线的影响,并在比较求值过程中消除了这一影响.     

适用于雷达系统的高温超导窄带滤波器

对雷达系统,通过在接收前端安置高Q、窄带、高带外抑制的滤波器,可以有效减少信号间的干扰,由此可见高性能的滤波器对于雷达系统来说,具有重要作用.与常规滤波器相比,高温超导滤波器具有带边陡峭、插入损耗小、带外抑制高、可以设计极窄带等特点.在本文中,我们设计加工了一种高性能的12阶切比雪夫(Chebyshev)高温超导带通滤波器,其中心频率为1341兆赫兹、带宽为5.035兆赫兹,可用于雷达系统.在滤波器设计中,我们用Sonnet软件对滤波器进行了仿真计算.最后滤波器在以氧化镁为衬底的双面超导薄膜上制作,衬底直径为2英寸、厚度为0.5毫米.测试结果表明,该滤波器符合设计要求,具有很好的选择性和带外抑制.     

大学物理实验中分类教学的探索和研究

本文对大学物理实验课程的教学现状进行了分析,提出了对大学物理实验课程进行分类教学改革的指导思想和遵循的原则及采取的措施。     

北京大学DC-SC光阴极注入器的升级设计

 基于直流电子枪-超导加速腔（DC-SC）光阴极注入器样机的初步实验结果,北京大学提出了新的注入器的改进设计。新注入器核心结构包括皮尔斯枪和3+1/2超导腔。文章给出了它们的详细结构参数,然后采用程序,对注入器的束流动力学进行了模拟。结果发现：新注入器可以提供具有高束流品质、高平均流强的电子束,束团的电荷量100 pC,横向发射度低于2 mm·mrad,脉宽5 ps,rms束斑可达0.5 mm,重复频率81.25 MHz;也可以提供电荷量为300 pC低重复频率的高峰值流强的电子束,其横向发射度小于3 mm·mrad,脉宽约为9 ps,以满足北京大学自由电子激光（PKU-FEL）实验平台的要求。     

Two-parameter estimation with three-mode NOON state in a symmetric triple-well potential

We propose a scheme to realize two-parameter estimation via Bose–Einstein condensates confined in a symmetric triple-well potential. The three-mode NOON state is prepared adiabatically as the initial state. The two parameters to be estimated are the phase differences between the wells. The sensitivity of this estimation scheme is studied by comparing quantum and classical Fisher information matrices. As a result, we find an optimal particle number measurement method. Moreover, the precision of this estimation scheme means that the Heisenberg scaling behaves under the optimal measurement.     

An Edge Server Placement Method Based on Reinforcement Learning

In mobile edge computing systems, the edge server placement problem is mainly tackled as a multi-objective optimization problem and solved with mixed integer programming, heuristic or meta-heuristic algorithms, etc. These methods, however, have profound defect implications such as poor scalability, local optimal solutions, and parameter tuning difficulties. To overcome these defects, we propose a novel edge server placement algorithm based on deep q-network and reinforcement learning, dubbed DQN-ESPA, which can achieve optimal placements without relying on previous placement experience. In DQN-ESPA, the edge server placement problem is modeled as a Markov decision process, which is formalized with the state space, action space and reward function, and it is subsequently solved using a reinforcement learning algorithm. Experimental results using real datasets from Shanghai Telecom show that DQN-ESPA outperforms state-of-the-art algorithms such as simulated annealing placement algorithm (SAPA), Top-K placement algorithm (TKPA), K-Means placement algorithm (KMPA), and random placement algorithm (RPA). In particular, with a comprehensive consideration of access delay and workload balance, DQN-ESPA achieves up to 13.40% and 15.54% better placement performance for 100 and 300 edge servers respectively.     

不同连接方案下垂直场线圈的性能研究

基于热-结构耦合分析了欧姆热和等离子体辐照引起的垂直场线圈的温度变化,对垂直场线圈在不同连接方式下的电气参数进行了研究,提出了一种优化的线圈连接方案.计算结果表明,该优化方案有助于改善垂直场线圈的响应性能,并提高其对等离子体的控制能力.     

掺杂Y2O3和BaCeO3提高MOD-YBCO超导性能的研究

本文通过在前驱液中添加过量钇盐和铈的有机盐,采用三氟乙酸盐-金属有机沉积法(TFA-MOD) 在铝酸镧单晶基体上制备了含有纳米氧化钇和纳米铈酸钡的YBCO薄膜. 与纯YBCO薄膜相比,掺杂Y₂O₃/BaCeO₃的YBCO膜的临界转变温度几乎保持不变,为91 K左右. 而掺杂Y₂O₃/BaCeO₃的YBCO膜的临界电流密度达到5.0 MA/cm² (77 K, 0T), 是纯YBCO膜临界电流密度的1.5倍.薄膜中的Y₂O₃和BaCeO₃可能在YBCO内部起到了 有效的钉扎磁通作用. 关键词： 钇钡铜氧薄膜 2O₃和纳米BaCeO₃')" href="#">纳米Y₂O₃和纳米BaCeO₃ 磁通钉扎 三氟乙酸盐-金属有机沉积     

Establishment of an integrated data fusion method between the colorimeter and near-infrared spectroscopy to discriminate the stir-baked Gardenia jasminoides Ellis

Stir-heating is a common method to process Gardenia jasminoides Ellis. The processing of the G. jasminoides Ellis which do not meet the regulated requirements can result in the unqualified products, finally decreasing the efficacy of the drug. To guarantee the quality of the stir-baked G. jasminoides Ellis, a rapid and efficient method to discriminate the qualified stir-baked G. jasminoides Ellis from the unqualified was developed based on the middle level data fusion. 61 batches of qualified and unqualified stir-baked G. jasminoides Ellis were collected and analyzed using colorimeter and near-infrared spectroscopy, separately. L*, A*, and B* were apparent features that quantitatively described the characteristics of samples. The latent variables of partial least squares discriminant analysis model were extracted as the features of near-infrared spectroscopy. The extracted features from colorimeter and near-infrared spectroscopy were fused and a discriminant model was built using partial least squares discriminant analysis method. Accuracy, sensitivity, and specificity were used to evaluate the ability of classification. As a result, the accuracy, sensitivity, and specificity of the optimal partial least squares discriminant analysis model based on fused data were all equal to 1. It demonstrated that the developed method can be capable of discriminating the qualified stir-baked G. jasminoides Ellis from the unqualified. Compared with classification model results using color parameters or near infrared data alone, this data fusion strategy greatly improved the accuracy of classification.     

抗冲聚丙烯微结构的研究

利用¹³C NMR对抗冲聚丙烯的微结构进行了研究.结果表明,由于抗冲聚丙烯聚合工艺的差别,4个抗冲聚丙烯样品中的乙烯链段的序列分布也不同.根据抗冲聚丙烯的¹³C NMR谱,计算出了丙烯段的次甲基和甲基的峰强度,由此建立了表征抗冲聚丙烯共聚物中丙烯链段的立构规整度的方法.