Na_2分子X~1Σ_g~ ,A~1Σ_u~ 和B~1Π_u态的势能函数

使用SAC/SAC-CI方法,利用6-311 g,6-311g**及cc-PVTZ等基组,对Na2分子的基态(X1Σg )、第一激发态(A1Σu )和第二激发态(B1Πu)的平衡结构和谐振频率进行计算.通过对3个基组的计算结果的比较,得出6-311g**基组为3个基组中最优基组的结论;使用6-311g**基组,分别利用SAC的GSUM(Group Sum of Operators)方法对基态(X1Σg ),SAC-CI的GSUM方法对激发态(A1Σu )和(B1Πu)进行单点能扫描计算,用正规方程组拟合Murrell-Sorbie函数,得到相应电子态的完整势能函数.用得到的势能函数计算与基态(X1Σg ),第一激发态(A1Σu )和第二激发态(B1Πu)相对应的光谱常数(Be,αe,ωe和ωeχe),结果与实验数据基本吻合.     

Removal of iodate from aqueous solution using diatomite/nano titanium dioxide composite as adsorbent

Journal of Radioanalytical and Nuclear Chemistry - Highly deficient strontium cobaltite (SrCoOx), as a new nanomaterial that is thermally treated at low temperature...     

ZrO2相态对ZSM-5@ZrO2催化剂物化性质及甲硫醇合成的影响

采用水热包覆法成功制备了ZSM-5@ZrO2催化剂,研究了ZrO2不同相态对催化剂物化性质和甲硫醇合成的影响.借助XRD、SEM、FTIR、Raman、BET和NH3/CO2-TPD等手段对催化剂结构性质进行了分析表征.结果表明,ZrO2不同相态对催化剂物化性质和催化性能影响较大.以四方晶相t-ZrO2制得ZSM-5@t-ZrO2催化剂形成了均匀的包覆相结构和微-介孔结构(微孔比表面积114.12 m2/g、介孔比表面积125.08 m2/g、总比表面积239.2 m2/g、总孔容0.38 cm3/g),同时具有酸碱特性(总酸量0.071 mmol/g、总碱量0.077 mmol/g).在反应压力1.0 MPa、H2S/CH3 OH摩尔比2:1、氮气流量90 mL/min、反应温度370℃条件下,催化剂表现出良好催化性能和反应寿命,CH3 OH转化率和CH3 SH选择性分别为92.07;、90.89;,催化寿命达20 h.     

A New Compound in the Cu‐In System – the Synthesis and Structure of Cu10In7

A new binary phase, Cu₁₀In₇, was found during the investigation of the η‐phase field in the Cu‐In system. Single crystals of Cu₁₀In₇ were grown from a melt under an inert atmosphere. The compound crystallizes in the monoclinic space group C2/m with cell parameters a = 13.8453(2) Å, b = 11.8462(1) Å, c = 6.7388(1) Å and β = 91.063(1). The structure is based on a unit of face‐sharing octahedra consisting of five Cu₄In₂ octahedra terminated by Cu₅In octahedra at both ends. The crystal structure is closely related to the Cu₁₁In₉ structure type.     

Determination of ranolazine in human plasma by liquid chromatographic-tandem mass spectrometric assay

A highly sensitive liquid chromatographic-tandem mass spectrometric method (LC-MS-MS) is developed to quantitate ranolazine in human plasma. The analyte and internal standard tramadol are extracted from plasma by liquid-liquid extraction using diethyl ether-dichloromethane (60:40 v/v), and separated on a Zorbax extend C(18) column using methanol-10mM ammonium acetate (60:40 v/v, pH 4.0) at a flow of 1.0 mL/min. Detection is carried out by multiple reaction monitoring on a QtrapTM LC-MS-MS system with an electrospray ionization interface. The assay is linear over the range 10-5000 ng/mL with a limit of quantitation of 10 ng/mL and a lower limit of detection (S/N > 3) of 1 ng/mL. Intra- and inter-day precision are < 3.1% and < 2.8%, respectively, and the accuracy is in the range 96.7-101.6%. The validated method is successfully used to analyze the drug in samples of human plasma for pharmacokinetic studies.     

Reactive Polymer as Artificial Solid Electrolyte Interface for Stable Lithium Metal Batteries

Lithium (Li) metal anodes have the highest theoretical capacity and lowest electrochemical potential making them ideal for Li metal batteries (LMBs). However, Li dendrite formation on the anode impedes the proper discharge capacity and practical cycle life of LMBs, particularly in carbonate electrolytes. Herein, we developed a reactive alternative polymer named P(St-MaI) containing carboxylic acid and cyclic ether moieties which would in situ form artificial polymeric solid electrolyte interface (SEI) with Li. This SEI can accommodate volume changes and maintain good interfacial contact. The presence of carboxylic acid and cyclic ether pendant groups greatly contribute to the induction of uniform Li ion deposition. In addition, the presence of benzyl rings makes the polymer have a certain mechanical strength and plays a key role in inhibiting the growth of Li dendrites. As a result, the symmetric Li||Li cell with P(St-MaI)@Li layer can stably cycle for over 900 h under 1 mA cm⁻² without polarization voltage increasing, while their Li||LiFePO₄ full batteries maintain high capacity retention of 96 % after 930 cycles at 1C in carbonate electrolytes. The innovative strategy of artificial SEI is broadly applicable in designing new materials to inhibit Li dendrite growth on Li metal anodes.     

All the disorder mechanisms in the 13:58 phases come together. Out of the modulated confusion rises the remarkable phase Ce12.60Cd58.68(2)

The compound Ce12.60Cd58.68(2) is a metrically commensurate representative of the incommensurately modulated phase Ce13Cd57+delta. It is most likely a lock-in phase. The structure, which was solved using seeding of the modulation from those positions most affected as well as direct solution by charge flipping, represents a rare case of ordering in a family of structures where disorder is the rule. The disorder mechanisms, known from other RE13Zn/Cd58 phases, order in this phase to give rise to a remarkable interplay between interstitials and vacancies. The compound crystallizes in the super space group Ccmm(alpha00)00s (standard setting Amma(00gamma)s00) with cell parameters a=27.2789(14) A, b=15.7592(1) A, and c=15.5816(4) A and a q vector close to 2/3.     

含氮前驱体对氮杂有序介孔炭材料及其氧还原电催化性能的影响

燃料电池中贵金属铂的大量使用是阻碍其发展的关键因素,亟需探索高效廉价的替代型电催化剂.在目前的替代型非贵金属催化剂研究中,氮杂炭材料是一类氧还原反应催化活性最好、成本最低廉的催化剂,被认为是最有可能取代Pt催化剂而获得实际应用的催化剂.氮杂有序介孔炭材料因具有极高的比表面积和规整的孔道结构,可实现活性位点的密集组装与反应物料的快速传输,受到研究者的广泛关注.本文分别以苯胺、吡咯和邻菲罗啉为含氮前驱体,介孔分子筛SBA-15为硬模板,采用纳米浇铸法成功制备了具有高比表面积的氮杂有序介孔炭材料,系统研究了不同含氮前驱体对氮杂有序介孔炭材料的影响.采用氮气吸附-脱附等温线、透射电子显微镜(TEM)、X射线衍射(XRD)和X射线光电子能谱(XPS)等方法研究了氮杂有序介孔炭的组成与结构,采用循环伏安法(CV)以及线性扫描伏安法(LSV)等手段考察了其电化学行为与氧还原反应极化性能.氮气吸附-脱附等温线结果表明,采用三种不同含氮前驱体制备的氮杂炭材料都对应Ⅳ型吸脱附等温线以及H4型滞后环,表明所制备的氮杂炭材料具有介孔结构.由TEM可以清楚地观察到氮杂炭材料已经成功地反转了SBA-15模板的孔道结构.同时发现,含氮前驱体对氮杂炭材料的比表面积和孔结构产生较大影响:以吡咯和邻菲罗啉为前驱体制备的炭材料C-PY-900和C-Phen-900的比表面积较高,分别为765和746 m2/g,而以苯胺为前驱体制备的炭材料C-PA-900比表面积较小(569 m2/g);三种炭材料平均孔径大小顺序为C-Phen-900 (3.7 nm)＜ C-PY-900 (5.0 nm)＜ C-PA-900 (5.9 nm),这是由于不同含氮前驱体在高温焙烧过程中热分解行为不同所致.XRD结果发现,含氮前驱体对氮杂炭材料的晶型基本没有影响,均为无定形碳.XPS结果表明,采用苯胺、吡咯以及林菲啰啉为前驱体制备的氮杂炭材料中氮含量基本相同,分别为3.13 at％,3.32 at％和3.33 at％,说明在相同热解条件下材料中的氮含量基本不受前驱体的影响,但不同配位环境的氮含量以及氮活化碳原子的含量却有较大差异,其氮活化碳原子的相对含量分别为15.60％,19.87％和23.04％.电化学测试结果表明,三种氮杂介孔炭材料的氧还原反应电催化活性顺序为C-PA-900＜C-PY-900＜C-Phen-900,其H2O2产率低于30％,说明氧还原反应经历4电子转移路径.在碱性条件下,所制氮杂有序介孔炭材料C-PY-900和C-Phen-900表现出较商品Pt/C催化剂更加优异的氧还原反应电催化性能.综上可见,通过改变含氮前驱体的类型可以有效调变氮杂炭材料的比表面积、孔道结构以及N 1s与C 1s化学态,从而调控氧还原反应活性,本文不仅制备出高活性的非贵金属氧还原电催化剂,同时也为高活性炭基电催化剂的可控制备提供了思路.