Adsorption of triton X-100 on silica gel: effects of temperature and alcohols

Adsorption of Triton X-100 (TX-100) on silica gel has been studied as a function of temperature (308–328 K) and composition for mixtures of water with ethanol or t-butanol. The adsorption capacity of silica gel for TX-100 decreases with increase in alcohol content. Adsorption isotherms of TX-100 on silica gel are four-region and were analyzed using the ARIAN (adsorption isotherm regional analysis) model. Data in regions 2, 3 and 4 were fitted to the Temkin, bilayer and reverse desorption isotherms, respectively. The results show that adsorption of TX-100 on silica gel in water and alcohol-water binary mixtures occurs mainly through formation of monolayer surface aggregates or low bilayer coverage.      

Peptides-assisted charge transfers in proteins: relay mechanism and its controllability

This feature article addresses several novel aspects regarding the peptide-mediated charge migrations, including: i) radical exchanges with tunable radical types (σ-radical versus π-radical) and electron-transfer (ET)-channel-tunable cooperative proton-coupled ET (PCET) mechanism, including hydrogen-atom transfer (HAT), single ET-channel PCET, double ET channel PCET, and channel-type-tunable (σ-channel versus π-channel) PCET; ii) hole hopping migration between the active groups in the side-chains and its controllability; iii) hole hopping through stepping-stones via a solvated “hole” form; and iv) electron hopping through positively charged groups as stepping-stones via a solvated electron state. In particular, the controllability of the ET channels (pathways and types) and solvated-“hole”/“electron”-based relay mechanisms are mainly mentioned. Clearly, this is an important addition to the well-documented mechanisms for charge migration in proteins. In view of the complexity of protein charge migration, further exploration on details of the stepping-stone-based relay mechanisms, by considering the properties and structures of the redox active centers, their intercalators, and the real surroundings, is still needed.     

Efficient approach to high barrier packaging using microfibrillar cellulose and shellac

This paper presents an investigation on the enhancement of the barrier properties of paperboard and paper. Microfibrillar cellulose (MFC) and shellac were deposited on the fibre based substrates using a bar coater or a spray coating technique. The air, oxygen and water vapour permeability properties were measured to quantify the barrier effect of the applied coatings. In addition, the mechanical properties were determined and image analysis of the structure was performed to examine the coating adhesion. The air permeance of the paperboard and papers was substantially decreased with a multilayer coating of MFC and shellac. Furthermore, for the MFC and shellac coated papers, the oxygen transmission rate decreased several logarithmic units and the water vapour transmission rate reached values considered as high barrier in food packaging (6.5 g/m² 24 h). The analysis of mechanical and morphological properties indicated good adhesion between the coating and the base substrate.     

The thermal conductivities enhancement of mono ethylene glycol and paraffin fluids by adding β-SiC nanoparticles

Changes in the thermal conductivities of paraffin and mono ethylene glycol (MEG) as a function of β-SiC nanoparticle concentration and size was studied. An enhancement in the effective thermal conductivity was found for both fluids (i.e., both paraffin and MEG) upon the addition of nanoparticles. Although an enhancement in thermal conductivity was found, the degree of enhancement depended on the nanoparticle concentration in a complex way. An increase in particle-to-particle interactions is thought to be the cause of the enhancement. However, the enhancement became muted at higher particle concentrations compared to lower ones. This phenomenon can be related to nanoparticles interactions. An improvement in the thermal conductivities for both fluids was also found as the nanoparticle size shrank. It is believed that the larger Brownian motion for smaller particles causes more particle-to-particle interactions, which, in turn, improves the thermal conductivity. The role that the base-fluid plays in the enhancement is complex. Lower fluid viscosities are believed to contribute to greater enhancement, but a second effect, the interaction of the fluid with the nanoparticle surface, can be even more important. Nanoparticle-liquid suspensions generate a shell of organized liquid molecules on the particle surface. These organized molecules more efficiently transmit energy, via phonons, to the bulk of the fluid. The efficient energy transmission results in enhanced thermal conductivity. The experimentally measured thermal conductivities of the suspensions were compared to a variety of models. None of the models proved to adequately predict the thermal conductivities of the nanoparticle suspensions.     

Effect of dielectric medium on angiotensin converting enzyme inhibitors binding to Zn<Superscript>2+</Superscript>

The Becke3LYP density functional was used to study structural and thermodynamic parameters of bivalent zinc cation complexes with selected substrates and ACE inhibitors (H₂O/OH⁻, neutral forms of captopril, zofenoprilat, omapatrilat, CH₃CONHCH₃, and N-terminal anions of captopril, zofenoprilat, omapatrilat, enalaprilat, perindoprilat, trandolaprilat, and fosinoprilat). The combination of DFT and the conductor-like polarizable continuum model (CPCM) were employed to compute the Gibbs interaction energies (ΔG) between Zn²⁺ and the selected ACE inhibitors for dielectric media with ɛ = 5 (to simulate the protein environment) and for water media (ɛ = 78.39) for comparison purposes. The results show that ΔG is sensitive to the dielectric constant of the environment and that lower dielectric medium favors the binding of inhibitors to the zinc cation.     

Synthesis and photophysical properties of luminescent mononuclear and dinuclear gold(I) complexes with ethynyl-substituted phenanthrolines

A novel asymmetric dinuclear gold(I) complex with 3,6-diethynylphenanthroline, 3,6-bis{(PPh₃)–Au–C≡C}₂-phen, has been synthesized from Au(PPh₃)Cl (PPh₃ = triphenylphosphine) and 3,6-diethynyl-1,10-phenanthroline. The asymmetrical dinuclear gold(I) complex, 3,6-bis{(PPh₃)–Au–C≡C}₂-phen, demonstrated a weak phosphorescence assignable to the metal-perturbed ³ π–π* transition in the long wavelength region compared to an intense emission of the symmetrical dinuclear complex with 3,8-diethynylphenanthroline, 3,8-bis{(PPh₃)–Au–C≡C}₂-phen. A similar tendency of phosphorescent bands for the mononuclear gold(I) complexes with 5-ethynylphenanthroline, 5-{(PPh₃)–Au–C≡C}-phen, and 3-ethynylphenanthroline, 3-{(PPh₃)–Au–C≡C}-phen was observed. The absorption bands assignable to the π–π*(C≡Cphen) transition and phosphorescent emission assignable to the metal-perturbed ³ π–π* transition for these four gold(I) complexes were reasonably consistent with the results calculated by DFT and TD-DFT.     

Influence of containing moisture on hydrothermal stability of modified collagen thermal characteristics analysis by DSC

The thermal stability of sheepskin collagen cross-linked with chrome sulfate and mimosa (MI)–oxazolidine (OZ), respectively, had been researched in this experiment. All samples’ shrinkage temperatures (T _s) are determined by a special T _s-testing-apparatus and denaturation temperatures (T _d) are determined by the differential scanning calorimetry. The relations between the modified collagens containing moisture and their hydrothermal stability, T _s or T _d, were studied. The results show that the cross linking agents can enhance the thermal stability of modified collagen whose T _s are 109.8 and 110.6 °C for collagen treated with chrome and MI–OZ, respectively. When the samples contain 25–71.9% moisture for chrome leather and 20–71.1% for leather treated with MI–OZ, the hydrothermal stability will decrease with the increase of moisture. It was found that the difference between T _s and T _d of collagen modified by chrome is more obvious than that of collagen modified with MI–OZ. And when the moisture of chrome leather exceeds 55%, T _d cannot express thermal stability of modified collagen as a substitute for T _s, and the moisture is 40% for leather tanned with MI–OZ.     

Investigation of gaseous metabolites from moulds by Ion Mobility Spectrometry (IMS) and Gas Chromatography-Mass Spectrometry (GC-MS)

The metabolism of moulds results in the formation of various microbial volatile organic compounds (MVOCs). These substances can be used as an indicator for the presence of moulds in the indoor environment. Three different mould strains were cultivated on culture media and IMS spectra of gaseous mould metabolites were recorded using a portable mini system with a tritium source and a 5 cm drift cell. The headspace spectra are characteristic for mould species and their age. Typical gaseous components of the metabolites were identified and compared with results obtained from gas chromatography using a mass spectrometer detector. It was observed that the MVOCs formation depends on mould species and their growing stage with a maximum of MVOCs emission occurring during the first 10 days. These preliminary results show that IMS can be applied to detect MVOCs in indoor environment and indicate hidden mould growth.     

Immobilization of Modified Papain with Anhydride Groups on Activated Cotton Fabric

Papain (EC 3.4.22.2) has been chemically modified using two novel reagents including different anhydrides of 1,2,4-benzenetricarboxylic and pyromellitic acids. Then, the modified papain was immobilized on the activated cotton fabric by a two-step method. The number of free amino groups in the modified protein was investigated through the 2,4,6-trinitrobenzenesulfonic acid method. Energy dispersive spectrometer was used to characterize papain immobilization. Some parameters of both modified and native papain immobilized on cotton fabric, such as optimum temperature, optimum pH, and the stabilities for reservation in various detergents were studied and compared. The resultant papain had its optimum pH shifted from 6.0 to 9.0. Compared with immobilized native papain, the thermal stability and the resistance to alkali and washing detergent of immobilized modified enzyme were improved considerably. When the concentration of detergent was 20 mg/ml, the activity of the immobilized pyromellitic papain retained about 40% of its original activity, whereas the native papain was almost inhibited. This work demonstrated that the cotton fabric immobilized modified papain has potential applications in the functional textiles field.     

Hollow fiber supported liquid membrane extraction for ultrasensitive determination of trace lead by portable tungsten coil electrothermal atomic absorption spectrometry

Hollow fiber supported liquid membrane extraction (HF-SLME) was used to separate and enrich trace lead from a large volume of 250 mL water sample to a final tiny volume of 30 μL of 1-octanol, 5 μL of which was inject into a tungsten coil electrothermal atomic absorption spectrometer (W-coil ET-AAS) for determination of lead. Some important parameters that influenced the extraction and determination were investigated in detail, such as the concentration of ammonium pyrrolidine dithiocarbamate (APDC), pH of sample solution, stirring rate, extraction time, pyrolysis current, atomization current, carrier gas flow rate, as well as interferences. Under the optimized conditions, a practical enrichment factor of 499 and a limit of detection (3σ) of 0.2 ng mL^{− 1} were obtained. The calibration curve was linear in the range of 0.5–10 ng mL^{− 1}. The relative standard deviation (RSD) was 5.6% for five measurements of a 4 ng mL^{− 1} lead standard solution. The accuracy of this method was examined by the analysis of certified reference water samples (GBW(E)080398 and GSBZ(E) 50009-88) for lead. Finally, the proposed method was applied to the determination of lead in local tap water, pond water and river water, with recoveries in the range of 96–109% for spiked samples.