High intensity focused ultrasound-induced gene activation in solid tumors

In this work, the activation of heat-sensitive trans-gene by high-intensity focused ultrasound (HIFU) in a tumor model was investigated. 4T1 cancer cells (2 x 10(6)) were inoculated subcutaneously in the hind limbs of Balb/C mice. The tumors were subsequently transducted on day 10 by intratumoral injection of a heat-sensitive adenovirus vector (Adeno-hsp70B-Luc at 2 x 10(8) pfu/tumor). On day 11, the tumors were heated to a peak temperature of 55, 65, 75, or 85 degrees C within 10-30 s at multiple sites around the center of the tumor by a 1.1- or 3.3-MHz HIFU transducer. Inducible luciferase gene expression was increased from 15-fold to 120-fold of the control group following 1.1-MHz HIFU exposure. Maximum gene activation (120-fold) was produced at a peak temperature of 65-75 degrees C one day following HIFU exposure and decayed to baseline within 7 days. HIFU-induced gene activation (75 degrees C-10 s) could be further improved by using a 3.3-MHz transducer and a dense scan strategy to 170-fold. Thermal stress, rather than nonthermal mechanical stress, was identified as the primary physical mechanism for HIFU-induced gene activation in vivo. Overall, these observations open up the possibility for combining HIFU thermal ablation with heat-regulated gene therapy for cancer treatment.     

25 GHz interleavers made by Michelson interferometer with a Gires–Tournois etalon

We report a high-quality interleaver with frequency spacing of 25 GHz, which is made by a Michelson interferometer with a mirror replaced by a Gires–Tournois etalon. Our optimal design and elaborate manufacture assure its excellent performance. We present the analysis of performance parameters, design of structural parameters, the unique fabrication technology and testing results of this interleaver in this paper.     

Separated AlxIn1−xN quantum dots grown by plasma-reactive co-sputtering

Separated Al_xIn_1−xN quantum dots (QDs) embedded in amorphous AlN films have been produced by radio-frequency co-sputtering technique on silicon (1 1 1) and quartz glass substrates. The mean size and density of Al_xIn_1−xN QDs can be conveniently monitored by deposition parameters. Transparent electron microscope, and X-ray diffraction were used to detect the structure of the Al_xIn_1−xN QDs system; field-emission scanning-electron microscope was adopted to measure the surface morphology and anticipate the size of the QDs; X-ray photoelectronic spectroscopy was used to measure the stoichiometric ratios of the QDs.     

Near-infrared intersubband absorption in (CdS/ZnSe)/BeTe type-II super-lattices grown on GaAs substrate by MBE

We study the dependence of absorption wavelength on the well width in the (CdS/ZnSe)/BeTe super-lattices(SL). With well-width reduction, the wavelength decreases from 1.795 to 1.57 μm. Structural properties, strain state and interface composition are determined via XRD measurement. A (CdS/ZnSe)/Be_xMg_1−xTe structure is prepared and XRD reveals the average lattice constant match to GaAs substrate. TEM reveals that numerous stacking faults exist in the (CdS/ZnSe)/BeTe structure, and stacking faults are completely suppressed in (CdS/ZnSe)/Be_xMg_1−xTe SLs. Intersubband transition down to 1.535–1.55 μm have been observed in SLs.     

The effect of glottal angle on intraglottal pressure

Intraglottal pressure distributions depend upon glottal shape, size, and diameter. This study reports the effects of varying glottal angle on intraglottal and transglottal pressures using a three-dimensional Plexiglas model with a glottis having nine symmetric glottal angles and a constant minimal glottal diameter of 0.06 cm. The empirical data were supported by computational results using FLUENT. The results suggested that (1) the greater the convergent glottal angle, the greater outward driving forces (higher intraglottal pressures) on the vocal folds; (2) flow resistance was greatest for the uniform glottis, and least for the 10 degrees divergent glottis; (3) the greatest negative pressure in the glottis and therefore the greatest pressure recovery for diverging glottal shapes occurred for an angle of 10 degrees; (4) the smaller the convergent angle, the greater the flow resistance; (5) FLUENT was highly accurate in predicting the empirical pressures of this model; (6) flow separation locations (given by FLUENT) for the divergent glottis moved upstream for larger flows and larger glottal angles. The results suggest that phonatory efficiency related to aerodynamics may be enhanced with vocal fold oscillations that include large convergent angles during glottal opening and small (5 degrees - 10 degrees) divergent angles during glottal closing.     

Waveguide electro-optic modulator in fused silica fabricated by femtosecond laser direct writing and thermal poling

An integrated electro-optic waveguide modulator is demonstrated in bulk fused silica. A Mach-Zehnder interferometer waveguide structure is fabricated by direct writing with a femtosecond laser followed by thermal poling. A 20 degrees electro-optic phase shift is achieved at an operating wavelength of 1.55 microm with an applied voltage of 400 V and an interaction length of 25.6 mm, which correspond to an estimated effective electro-optic coefficient of 0.17 pm/V for the TE-polarized mode.     

Full-field quantitative phase imaging by white-light interferometry with active phase stabilization and its application to biological samples

We report a Koehler-illumination-based full-field, actively stabilized, low-coherence phase-shifting interferometer, which is built on a white-light Michelson interferometer. By using a phase-stepping technique we can obtain full-field phase images of the sample. An actively stabilized phase-lock circuit is employed in the system to reduce phase noise. An application to human epithelial cells (HeLa cells) is achieved in our experiment. The advancement of this technique rests in its ability to take images of unstained biological samples quantitatively and on a nanometer scale.     

Fabrication of polymer compound microlens by lens-on-lens microstructures

We proposed a novel method for fabricating polymer compound microlenses (PCMLs) using micro-inkjet technique and subsequent curing process. Two different types of PCMLs with sandwich microstructure (PDMS-Glycerol-PDMS), concave and convex PCMLs, have been designed and fabricated in experiments. Convex PCML has two real images and two foci. The concave PCML has one real and one virtual focal planes, which can generate one real image and one virtual image respectively. Moreover, the diameter of concave PCML can be controlled by adjusting the curing time and temperature. The proposed method is simple, efficient and suitable for realizing large-scale high numerical aperture PCMLs array, which has potential applications in diverse optical systems such as optical storage and three-dimensional imaging.