Topological defects in spherical nematics

We study the organization of topological defects in a system of nematogens confined to the two-dimensional sphere (S2). We first perform Monte Carlo simulations of a fluid system of hard rods (spherocylinders) living in the tangent plane of S2. The sphere is adiabatically compressed until we reach a jammed nematic state with maximum packing density. The nematic state exhibits four +1/2 disclinations arrayed on a great circle. This arises from the high elastic anisotropy of the system in which splay (K1) is far softer than bending (K3). We also introduce and study a lattice nematic model on S2 with tunable elastic constants and map out the preferred defect locations as a function of elastic anisotropy. We find a one-parameter family of degenerate ground states in the extreme splay-dominated limit K_{3}/K_{1}-->infinity. Thus the global defect geometry is controllable by tuning the relative splay to bend modulus.     

Electrical spin injection and threshold reduction in a semiconductor laser

A spin-polarized vertical-cavity surface-emitting laser is demonstrated with electrical spin injection from an Fe/Al0.1Ga0.9As Schottky tunnel barrier. Laser operation with a spin-polarized current results in a maximum threshold current reduction of 11% and degree of circular polarization of 23% at 50 K. A cavity spin polarization of 16.8% is estimated from spin-dependent rate equation analysis of the observed threshold reduction.     

Laser-driven high-resolution patterning of indium tin oxide thin film for electronic device

We here introduce a laser-driven process to pattern transparent thin films on transparent substrates. This method utilizes a pre-patterned metal film as the dynamic release layer and the transparent thin film is selectively removed by a thermo-elastic force laser-induced in the underlying metal layer. High-fidelity indium tin oxide (ITO) thin film patterns were fabricated on plastic and glass substrates using a pulsed Nd:YAG laser. Tens of square centimeters could be patterned with several pulse shots. We fabricated a pentacene thin film transistor with ITO source and drain electrodes and observed a very low off-current level. This tells that the channel area between ITO electrodes was completely etched out by this laser-driven process. Combined with the absence of photoresist and chemical etching steps, this method provides a simple high-resolution route to pattern transparent thin films over large areas at low temperatures.     

Cathode-sheath driven low-speed aerodynamic flow actuation using direct-current surface glow discharges

Flow actuation by a continuous/pulsed, direct-current (DC) surface glow discharge is explored. The discharge comprises an array of pin electrode pairs flush mounted on a dielectric actuator surface that lies adjacent to stagnant air. Strong electrostatic fields produced in the cathode sheath region of the discharge provides a motive force on the ions which in turn drag the background gas resulting in directed air flow from the anode to the cathode. The induced flow velocity is estimated by particle image velocimetry (PIV) at 10 Hz with TiO₂ seeding. For a pulsed DC discharge with peak power of 5 W per electrode pair, the induced flow velocity reaches peak values of about 1.7 m/s which is comparable to dielectric-barrier discharge (DBD) or corona discharge actuators. The actuation effect quantified by the magnitude of induced velocity increases as the pulse frequency increases from 0 to 1 kHz. The actuation effect decreases for further increase in frequency above 1 kHz. Decreased actuation effect at high frequency is accompanied by structural change in the discharge. At fixed frequency of 1 kHz, flow actuation effect is highest for a square wave pulse with a duty cycle of 50% indicating that pulsed DC discharges produces better actuation than continuous DC with a corresponding reduction in energy consumption.     

Studies on vocal fold injection and changes in pitch associated with alcohol intake

The current study was carried out with particular emphasis on the association between phonetic function tests and alterations in the appearance of the hypopharyngeal and laryngeal mucosa, such as capillary dilatation, edema, and vocal fold injection after alcohol intake. The results demonstrated the occurrence of previously unrecognized pathophysiological changes associated with synchronous phonetic functions in the vocal pathway after alcohol intake. Serum ethanol and aldehyde concentration levels were evaluated hourly for 2.5 h after ingestion of alcohol. When an electronystagmogram showed the typical pattern of alcohol intake, the study was initiated. Occasionally, rhinography was performed on subjects complaining of a stuffy nose after alcohol intake.     

Structure of the Ba-induced Si(111)- (3 x 2) reconstruction

The Ba/Si(111) surface, previously known as a 3 x 1 phase, is found to have a 3 x 2 periodicity and a semiconducting band gap. The substrate reconstructs into the honeycomb chain-channel (HCC) structure with Ba atoms in the channel, as in the alkali-metal-induced Si(111)-(3 x 1). However, the metal coverage is determined to be 1/6 monolayers, half the alkali-metal coverage. We propose that the structure and the metal coverage determined for the Ba adsorbate is universal for other alkaline-earth-metal adsorbates. With the alkali-metal-induced 3 x 1 case, our results lead to a rule that one donated electron per 3 x 1 surface unit is necessary to stabilize the HCC reconstruction of Si.     

Visible nonlinear band-edge luminescence in ZnSe and CdS excited by a mid-infrared free-electron laser

Visible nonlinear band-edge luminescence in ZnSe and CdS bulk crystals was observed upon excitation by a mid-infrared free-electron laser (mid-IR FEL) at approximately 9 mm. The emission intensity is proportional to the 74th and 45th powers of the excitation intensity for ZnSe and CdS, respectively. For ZnSe, the temporal profile of the emission intensity does not follow the profile of the excitation macropulse of the FEL, but sharply rises and decays only at the maximum of the macropulse profile. These features are in marked contrast to those of a previous report, where the emission profile follows that of the macropulse, and the emission intensity scales with the 4th power of the excitation intensity. The experimental observations were reproduced by a numerical simulation based on impact ionization and avalanche ionization by electrons accelerated by the optical electric field of the FEL. The large nonlinearity in the bandedge emission comes from the macropulse temporal structure, which consists of micropulses densely spaced to allow excited carriers to survive when the next micropulse arrives. They work as seed carriers in the next carrier multiplication step.     

Production of charged pions, kaons and antikaons in relativistic C + C and C + Au collisions

Production cross-sections of charged pions, kaons and antikaons have been measured in C+C and C+Au collisions at beam energies of 1.0 and 1.8 AGeV for different polar emission angles. The kaon and antikaon energy spectra can be described by Boltzmann distributions whereas the pion spectra exhibit an additional enhancement at low energies. The pion multiplicity per participating nucleon M(π⁺)/<A _part> is a factor of about 3 smaller in C+Au than in C+C collisions at 1.0 AGeV whereas it differs only little for the C and the Au target at a beam energy of 1.8 AGeV. The K⁺ multiplicities per participating nucleon M(K⁺)/ <A _part> are independent of the target size at 1 AGeV and at 1.8 AGeV. The K^- multiplicity per participating nucleon M(K^-)/ <A _part> is reduced by a factor of about 2 in C+Au as compared to C+C collisions at 1.8 AGeV. This effect might be caused by the absorption of antikaons in the heavy target nucleus. Transport model calculations underestimate the K^-/K⁺ ratio for C+C collisions at 1.8 AGeV by a factor of about 4 if in-medium modifications of K-mesons are neglected. Received: 10 December 1999 / Accepted: 14 November 2000     

Prominin‐1‐Specific Binding Peptide‐Modified Apoferritin Nanoparticle Carrying Irinotecan as a Novel Radiosensitizer for Colorectal Cancer Stem‐Like Cells

Resistance of cancer stem cells to radiotherapy remains a major obstacle to successful cancer management. Prominin‐1 (PROM1) is a cancer stem cell marker. Nanoparticle (NP) chemotherapeutics preferentially accumulate in tumors and are able to target cancer and cancer stem‐like cells through cancer cell‐specific ligands, making them uniquely suited as radiosensitizers for chemoradiation therapy. Using a biocompatible apoferritin NP, a PROM1‐targeted NP carrying irinotecan (PROM1‐NP) is engineered. The synergistic effect of the NP and irradiation is evaluated in PROM1‐overexpressing HCT‐116 colorectal cancer cell lines in vitro and in vivo. PROM1‐NP has a size of 17.2 ± 0.2 nm and surface charge of ?13.5 ± 0.2 mV. It demonstrates higher intracellular uptake than nontargeted NP or irinotecan alone. Treatment with PROM1‐NPs decreases HCT‐116 cell proliferation in a dose‐ and time‐dependent manner. In vitro radiosensitization reveals that PROM1‐NP is significantly more effective as a radiosensitizer than nontargeted NP or irinotecan. HCT‐116 tumor xenograft growth is markedly slower following treatment with PROM1‐NP plus irradiation, suggesting that PROM1‐NP is more effective as a radiosensitizer than irinotecan and nontargeted NP in vivo. This study provides the first preclinical evidence of the effectiveness of PROM1‐targeted NP formulation of irinotecan as a radiosensitizer.