复杂地理环境的图像分割及电波传播特性

复杂地理环境是电波传播不可避免的传播环境,不仅不规则地形会对电波传播产生影响,不同的地表媒质对电波传播也会产生不同的影响。为了使得电波传播特性的预测结果更加地准确有效,通过图像分割算法实现地表环境的简单分类,同时对不同的媒质赋予不同的电磁参数,并结合数字高程模型（DEM)数据,实现了既具有地形起伏信息又具有地表电磁环境参数的复杂地理环境建模。在此基础上,对地表电磁环境信息做了网格剖分处理,利用抛物方程（PE）模型对复杂地理环境下的电波传播特性进行了预测。     

中子单粒子效应研究现状及进展

回顾了中子单粒子研究的国内外发展情况,介绍了近几年西北核技术研究所在西安脉冲堆开展的低能中子单粒子效应研究进展。比较了稳态与脉冲工况下中子单粒子效应的异同性;分析了含有SRAM结构器件随着特征尺寸的减小,中子单粒子效应敏感性加剧的物理机制。分析认为目前中子单粒子效应已成为小尺寸大规模互补金属氧化物半导体器件的主要中子效应表现;中子辐射效应研究中,除了位移损伤效应以外还必需重视由中子电离造成的中子单粒子效应。     

磁约束技术对激光诱导等离子体辐射特性的影响

为了提高激光诱导击穿光谱质量,利用Nd：YAG激光器烧蚀土壤样品,研究了磁场作用下的激光诱导等离子体辐射特性。实验结果表明,在相同激光输出能量条件下,随着磁场强度的增大,等离子体的辐射强度逐渐增强。计算可知,当采用的磁场强度为0.5 T时,样品元素Al,Fe,Ba和Ti的光谱线强度比无磁场作用时的分别增强了52.35%,46.64%,64.01%和51.73%,光谱信噪比分别提高了45.44%,69.64%,40.26%和41.33%;而等离子体的电子温度和电子密度分别提高了1 355.01 K和0.531016 cm-3。可见,利用磁场约束等离子体的技术是提高激光光谱质量的一种有效方法。     

Preparation,Morphology and Properties of Poly(Trimethylene Terephthalate)/Thermoplastic Polyester Elastomer Blends

Poly(trimethylene terephthalate)(PTT)/thermoplastic polyester elastomer (TPEE) blends were prepared and their miscibility, crystallization and melting behaviors, phase morphology, dynamic mechanical behavior, rheology behavior, spherulites morphology, and mechanical properties were investigated by differential scanning calorimetry (DSC), scanning electron microscopy (SEM), dynamic mechanical analysis (DMA), parallel-plate rotational rheometry, polarized optical microscopy (POM), wide angle X-ray diffraction (WAXD), universal tensile tester and impact tester, respectively. The results suggested that PTT and TPEE were partially miscible in the amorphous state, the TPEE rich phase was dispersed uniformly in the solid matrix with a size smaller than 2 μm, and the glass transition temperatures of the blends decreased with increasing TPEE content. The TPEE component had a good effect on toughening the PTT without depressing the tensile strength. The blends had improved melt viscosities for processing. When the blends crystallized from the melt state, the onset crystallization temperature decreased, but they had a faster crystallization rate at low temperatures. All the blends’ melts exhibited a predominantly viscous behavior rather than an elastic behavior, but the melt elasticity increased with increasing TPEE content. When the blends crystallized from the melt, the PTT component could form spherulites but their morphology was imperfect with a small size. The blends had larger storage moduli at low temperatures than that of pure PTT.     

Nonlinear polarization rotation-induced pulse shaping in a stretched-pulse ytterbium-doped fiber laser

We report on controllable pulse shaping in a Yb-doped stretched-pulse fiber laser followed by a high-power chirped pulse amplifier. We demonstrate that the pulses after an extra-cavity grating pair change their intensity profile from Lorentz to Gaussian and then to sech2 shapes by adjusting the intra-cavity polarization through a quarter-wave plate inside the fiber laser cavity. The laser pulses with different pulse shapes exhibit pulse-to-pulse amplitude fluctuation of -- 1.02%, while the sech2-shaped pulse train is provided with a more stable free-running repetition rate as a result of the stronger self-phase modulation in the fiber laser cavity than Lorentz- and Gaussian-shaped pulse trains.     

Optimal production control of a dynamic two-product manufacturing system with setup costs and setup times

This paper deals with the optimal control of a one-machine two-product manufacturing system with setup changes, operating in a continuous time dynamic environment. The system is deterministic. When production is switched from one product to the other, a known constant setup time and a setup cost are incurred. Each product has specified constant processing time and constant demand rate, as well as an infinite supply of raw material. The problem is formulated as a feedback control problem. The objective is to minimize the total backlog, inventory and setup costs incurred over a finite horizon. The optimal solution provides the optimal production rate and setup switching epochs as a function of the state of the system (backlog and inventory levels). For the steady state, the optimal cyclic schedule is determined. To solve the transient case, the system's state space is partitioned into mutually exclusive regions such that with each region, the optimal control policy is determined analytically.     

平行耦合双量子点分子A-B干涉仪的电荷及其自旋输运

利用非平衡格林函数方法,理论研究每臂中嵌有一个平行耦合双量子点分子的A-B干涉仪(平行耦合双量子点分子A-B干涉仪)的电荷及其自旋输运性质.无外磁场时,与每臂中嵌有一个量子点的A-B干涉仪相比较,平行耦合双量子点分子A-B干涉仪中电子隧穿变得更加容易发生.当平行耦合双量子点分子A-B干涉仪中引入外磁场时,能够在电导能谱中观察到一个Fano共振和一个反共振,这两种输运状态在磁场取适当数值时能够同时消失.此外,通过调节左右两电极间的偏压、磁通和Rashba自旋轨道相互作用,可以对体系自旋输运进行调控.     

A relation between a metallic film covering on diamond formed during growth and nanosized inclusions in HPHT as-grown diamond single crystals

One of the most important characteristics and basic phenomena during diamond growth from liquid metal catalyst solutions saturated with carbon at high temperature–high pressure (HPHT) is that there exists a thin metallic film covering on the growing diamond, through which carbon-atom clusters are delivered to the surface of the growing diamond by diffusion. A study of microstructures of such a metallic film and a relation between the thin metallic film and the inclusions trapped in HPHT as-grown diamond single crystals may be helpful to obtain high-purity diamond single crystals. It was found that both the metallic film and the HPHT as-grown diamond single crystals contain some nanostructured regions. Examination by transmission electron microscopy suggests that the microstructure of the thin metallic film is in accordance with nanosized particles contained in HPHT as-grown diamond single crystals. The nanosized particles with several to several tens of nanometers in dimension distribute homogeneously in the metallic film and in the diamond matrix. Generally, the size of the particles in the thin metallic film is relatively larger than that within the diamond matrix. Selected area electron diffraction patterns suggest that the nanosized particles in the metallic film and nanometer inclusions within the diamond are mainly composed of f.c.c. (FeNi)₂₃C₆, hexagonal graphite and cubic γ-(FeNi). The formation of the nanosized inclusions within the diamond single crystals is thought not only to relate to the growth process and rapid quenching from high temperature after diamond synthesis, but also to be associated with large amounts of defects in the diamond, because the free energy in these defect areas is very high. The critical size of carbide, γ-(FeNi)and graphite particles within the diamond matrix should decrease and not increase according to thermodynamic theory during quenching from HPHT to room temperature and ambient pressure. Received: 13 September 2001 / Accepted: 12 June 2002 / Published online: 17 December 2002 RID="*" ID="*"Corresponding author. Fax: +86-0531/295-5081; E-mail: yinlw@sdu.edu.cn     

糠醇辅助的聚合凝胶法制备纳米Li4Ti5O12负极材料

以硝酸锂、钛酸正丁酯和糠醇为反应物,采用糠醇聚合凝胶法制备了纳米Li₄Ti₅O₁₂粉体．利用XRD、SEM和BET比表面测试对产物进行了表征,并研究了纳米Li₄Ti₅O₁₂粉体作为锂离子电池负极材料的电化学性能．在700℃或更高温度烧结时产物为纯相的尖晶石型．通过柠檬酸、聚乙烯吡咯烷酮、十六烷基三甲基溴化铵(CTAB)表面活性剂的加入能够减少产物颗粒的团聚程度,增大粉体的比表面积,提高其电化学性能．加入0.5 g CTAB、700℃烧结12 h的Li₄Ti₅O₁₂粉体展示出最高的比容量和最佳的循环性能,10 C下充电比容量高达156.7 mAh/g．     

Red,green and infrared three-wavelength lasers generated from LD side-pumped Nd3+:YAG crystal

To obtain 1064 nm/532 nm/660 nm three wavelength lasers operating simultaneously or singly, a novel LD side-pumped Nd³⁺:YAG laser system with acousto-optic Q-switched and nonlinear frequency conversion technologies was investigated. When the three wavelength lasers output singly and the Pumping power was 103 W, 1064 nm laser was 14.5 W and the green and red lasers reached 4.7 W and 1.6 W, respectively, at the repetition rate of 10.5 kHz and 11.5 kHz. When they worked simultaneously, the red, green and infrared lasers were obtained with the output power distribution of 1.0 W at 660 nm, 4.3 W at 532 nm and 10.1 W at 1064 nm, and the instability was less than 2% within 3 h.