In situ deposition behavior of silica-based layers and its effect on thermal degradation of IN713 turbine blades during operation of a micro-gas turbine

This study examined the in situ deposition behavior of silica-based layers on IN713 turbine blades during the operation of a 13 kgf-class gas turbine at a rotation speed of 20,000/min as well as its effect on the degradation of the metallic substrate. Tetraethylorthosilicate (TEOS) was mixed with the fuel (liquid petroleum gas, LPG) and burned to generate silica-based coating precursors for deposition from the flame. Two deposition conditions were adopted. For condition 1 (C1), the silicon-to-carbon ratio in the mixed fuel was set at 0.1 mol% for the first 5 min and at zero mol% for the final 95 min in a 100-min operation. For condition 2 (C2), the ratio was set at 0.005 mol% during the entire 100 min operation. The total TEOS feed was the same under both conditions. C1 resulted in a rather uniform and thicker (5-10 μm on the pressure side) porous silica-based coating on the blade than C2. The in situ deposited layer of C1 was well preserved on the blade and protected the underlying metallic substrate from oxidation during the entire 100 min operation. The layer on the C2 blades was ∼5 μm thick at the region near to root, but was too thin in the other areas on the blade to be protective. The early build-up of a porous layer to an effective thickness on the blades produced a thermal barrier toward the substrate as well as a diffusion barrier toward the oxidizing elements during operation.     

Uniform Drug Loading into Prefabricated Microparticles by Freeze‐Drying

Microparticle‐based drug delivery is a promising technology for small volume bioassay platforms. The general utilization of the drug‐loaded microparticles in the in vitro bioassay platforms requires the drug loading method, which should impregnate the general drug types (e.g., water insoluble) with high payload into the variously designed microparticles. Loading the drug into the prefabricated microparticles using solvent evaporation satisfies the requirement. However, similar to the “coffee‐ring effect,” drugs are loaded in a seriously nonuniform manner, caused by the capillary flow during the evaporation process. Here, it is presented that the freeze‐drying is an efficient way to load uniform and high amount of the drug into the prefabricated microparticles. It is demonstrated that freezing solvent can block the capillary flow during the solvent removal process, improving the loading uniformity. The delivered amount of drugs is linearly proportional to the initial loading amount of drugs. Also, this drug loading method is shown to be applied to the various drug types and the prefabricated microparticles with different properties. Considering many challenges to suppress the “coffee‐ring effect” that induces nonuniform impregnation/deposition, the proposed concept can be applied not only for microparticle‐based drug delivery but also for uniform coating applications (e.g., thin‐film coating, DNA/protein microarray).     

Performance limits of pico-cell systems using radio-over-fiber techniques with an electroabsorption modulator

We investigate the performance limits of a pico-cell system using the radio- over-fiber technique with an electroabsorption modulator (EAM) in a 2.4 GHz wireless local area network (WLAN) environment. To understand the performance limits of the system using an EAM as the optical transceiver, we vary the optical modulation index (OMI) of the transmitter for different bias voltages to the EAM. Power margins in the links are found to estimate a possible service range, and packet loss rates (PLRs) in the pico-cell system are measured to evaluate the transmission performance. The total service range can be extended up to 3 m by adjusting the OMI of the transmitter for different applied bias voltages to the EAM.     

Thermal-noise effect on the transition to Rayleigh-Bénard convection

We report measurements of fluctuation and roll patterns near the transition to Rayleigh-Bénard convection which are consistent with a fluctuation-induced first-order transition, as predicted by Swift and Hohenberg. Above onset, we find convection rolls with noise-induced fluctuations, time-dependent amplitude modulation and roll undulation, and homogeneous dislocation nucleation.     

Structural and electrical properties of core–shell structured GaP nanowires with outer Ga2O3 oxide layers

This paper presents a review of our current experimental research on GaP nanowires grown by a vapor deposition method. Their structural, electrical, opto-electric transport, and gas-adsorption properties are reviewed. Our structural studies showed that a GaP nanowire consisted of a core–shell structure with a single-crystalline GaP core and an outer Ga₂O₃ layer. The individual GaP nanowires exhibited n-type field effects. Their electron mobilities were in the range of about 6 to 22 cm²/V s at room temperature. When the nanowires were illuminated with an ultraviolet light source, an abrupt increase of conductance occurred resulting from carrier generation in the nanowire and de-adsorption of adsorbed OH^- or O₂ ^- ions on the Ga₂O₃ surface shell. Using an intrinsic Ga₂O₃ shell layer as a gate dielectric, top-gated GaP nanowire field-effect transistors were fabricated and characterized. Like other metal oxide nanowires, the carrier concentration and mobility of GaP nanowires were significantly affected by the surface molecular adsorption of OH or O₂. The GaP nanowire devices were fabricated as sensors for NO₂, NH₃, and H₂ gases by using a simple metal decoration technique. PACS 73.63.-b; 72.80.Ey; 85.35.-p     

Observation of competing order in a high-Tc superconductor using femtosecond optical pulses

We present studies of the photoexcited quasiparticle dynamics in Tl(2)Ba(2)Ca(2)Cu(3)O(y) (Tl-2223) using femtosecond optical techniques. Deep into the superconducting state (below 40 K), a dramatic change occurs in the temporal dynamics associated with photoexcited quasiparticles rejoining the condensate. This is suggestive of entry into a coexistence phase which, as our analysis reveals, opens a gap in the density of states (in addition to the superconducting gap), and furthermore, competes with superconductivity resulting in a depression of the superconducting gap.     

Soft‐Chemical Exfoliation Route to Layered Cobalt Oxide Monolayers and Its Application for Film Deposition and Nanoparticle Synthesis

A colloidal suspension of exfoliated, layered cobalt oxide nanosheets has been synthesized through the intercalation of quaternary tetramethylammonium ions into protonated lithium cobalt oxide. According to atomic force microscopy, exfoliated nanosheets of layered cobalt oxide show a plateau‐like height profile with nanometer‐level height, underscoring the formation of unilamellar 2D nanosheets. The exfoliation of layered cobalt oxide was cross‐confirmed by X‐ray diffraction, UV/Vis spectroscopy, and transmission electron microscopy. The maintenance of the hexagonal in‐plane structure of the cobalt oxide lattice after the exfoliation process was evidenced by selected‐area electron diffraction and Co K‐edge X‐ray absorption near‐edge structure analysis. The zeta‐potential measurements clearly demonstrated the negative surface charge of cobalt oxide nanosheets. Adopting the nanosheets of layered cobalt oxide as a precursor, we were able to prepare the monodisperse CoO nanocrystals with a particle size of ≈10 nm as well as the heterolayered film composed of cobalt oxide monolayer and polycation.     

Surface-enhanced Raman scattering of nucleic acid components in silver sol: Uracil and its derivatives

The surface-enhanced Raman scattering (SERS) of uracil, uridine, 2′-deoxyuridine and 5′-rUMP adsorbed on aqueous silver sol was investigated. Uracil was found to adsorb as the N-3 deprotonated form, which underwent a reorientation from the situation where the base was perpendicular to the surface to the situation where the base lay flat on the surface as the surface charge was made more negative. The N-3 deprotonated molecules of uridine, 2′-deoxyuridine and 5′-rUMP were found to lie flat on the silver surface regardless of the bulk concentration and the silver surface charge.     

Magnetic and noise properties of as-deposited and annealed soft underlayer

We studied the magnetic and noise properties with various soft underlayer (SUL) types. For an as-deposited SUL, the results of spectrum, oscilloscope waveform and MFM indicated that the SUL types with IrMn pinning layer have more noise level than that of SUL types without IrMn pinning layer. And, after magnetic filed annealing along radial direction of disk, the exchange bias field increased and the noise level of type B (exchange bias type) decreased. These results reveal that incomplete or partial coupling may be generated at the interface between IrMn and ferromagnetic layer in as-deposited SUL. This incomplete coupling may result in complex or multidomain patterns in ferromagnetic layer.     

Synergistic effect of hydrogen peroxide production and sonochemiluminescence under dual frequency ultrasound irradiation

The synergistic effect of H(2)O(2) production and sonochemiluminescence (SCL) was studied under both orthogonal and opposite dual irradiation at the frequencies of 28, 584 and 970 kHz and at various acoustic powers. The largest reduction in H(2)O(2) production was observed under opposite dual irradiation at a 28/28 kHz frequency without considering the acoustic power levels. The largest enhancement was observed under dual irradiation at a frequency of 28/970 kHz. This enhancement might be due to the increased number of bubbles that underwent violent collapse by low frequency ultrasound (28 kHz). These results were also confirmed by observing the SCL. Under dual irradiation at relatively high frequencies (i.e., 584 and 970 kHz), the synergistic effect was high at low acoustic power levels. However, the effect tended to decrease (to the equivalent of the calculation from the result of each single irradiation) with increasing acoustic power. Unlike dual irradiation coupled with a frequency of 28 kHz, the inhibition effect was not observed under dual irradiation at relatively high frequencies. With respect to H(2)O(2) production, the production rate constants of H(2)O(2) followed the order of 584/584>584/970>28/970≈28/584>28/28 kHz, which resulted from the fact that the production efficiency of H(2)O(2) at an irradiation frequency of 584 kHz was considerably higher than that at other frequencies.