Synthesis and Antitumor Evaluation of Novel Hybrids of Phenylsulfonylfuroxan and Estradiol Derivatives

Fifteen novel furoxan-based nitric oxide (NO) releasing hybrids of estradiol derivatives were synthesized and evaluated in vitro anti-proliferative activity in MDA-MB-231, A2780, Hela and HUVEC cell lines. Most of them displayed potent anti-proliferative effects. Among the compounds, 4-bromo-3-((phenylsulfonyl)-1,2,5-oxadiazole 2-oxide)-oxy-propoxy-estradiol ( 11 b ) exhibited the best activity with IC₅₀ values of 3.58–0.0008 μM. Preliminary pharmacological studies showed that 11 b induced apoptosis and hardly affected the cell cycle of MDA-MB-231 cell line. NO-releasing capacity and inhibition of ERK/MAPK pathway signaling might explain the potent antineoplastic activity of these compounds. The preliminary structure-activity relationship (SAR) showed that steroidal scaffolds with a linker in 3-position were favorable moieties to evidently increase the bioactivities of these hybrids. Overall, these results implied that 11 b merited to be further investigated as a promising anti-cancer candidate.     

4GPa超高压凝固Mg-6Zn-3Y合金的凝固组织及相分析

利用X射线衍射仪、扫描电镜并配合能谱分析研究了Mg-6Zn-3Y合金4 GPa超高压凝固组织.结果表明:在4 GPa超高压条件下凝固时,实验合金的凝固组织得到显著细化,基体α-Mg相的晶格间距有所减小;Zn在基体α-Mg中溶解度大幅提高,Y不溶于基体α-Mg;实验合金凝固组织中出现呈对称性的四瓣或六瓣花的初晶Y固溶体,该初晶花瓣形貌完整、尺寸较大,显示其充分自由生长;先发生的共晶反应的共晶组织为成“簇”分布的共晶团,共晶相呈点状或棒状;后发生的共晶反应的组织为离异共晶.超高压凝固显著地改变了实验合金的凝固过程.     

Probing the electronic and optical properties of silica-coated quantum dots with first-principles calculations

The electronic and optical natures of silica-coated semiconductor nanocrystals (Cd(2)Te(2)@(SiO(2))(24)) have been investigated by density functional theory (DFT) and time-dependent DFT calculations. The calculated results of Cd(2)Te(2)@(SiO(2))(24) have revealed that the structural synergy effect between the Cd(2)Te(2) quantum dots (QDs) and the silica coating shell plays a dominant role in the photoelectric properties. The binding of embedded Cd(2)Te(2) to the outer silica coating shell leads to the distortion of the silica nanocage, indicating strong coupling between the QDs and silica shell. The optical features of Cd(2)Te(2) clusters and Cd(2)Te(2)@(SiO(2))(24) complexes were evaluated using the time-dependent DFT method. It is determined that the maximal absorption peak of isolated Cd(2)Te(2) in a UV-Vis absorption spectrum appears at 584 nm, which shifts to 534 nm when the Cd(2)Te(2) QDs were encapsulated by silica, in close agreement with the experimental evidence. The excited process has a direct electronic transition character from the occupied Cd(2)Te(2) states to the outer silica nanocage excited states (core → shell electronic transitions). A deep insight into silica-coated QD systems is beneficial for understanding their optical nature and the development of core/shell QDs.     

Supersaturation controlled growth of MAFAPbI<Subscript>3</Subscript> perovskite film for high efficiency solar cells

Controlling the nucleation and growth of organic-inorganic hybrids perovskite is of key importance to improve the morphology and crystallinity of perovskite films. However, the growth mechanism of perovskite films based on classical crystallization theory is not fully understood. Here, we develop a supersaturation controlled strategy (SCS) to balance the nucleation and crystal growth speeds. By this strategy, we are able to find an ideal supersaturation region to realize a balance of nucleation and crystal growth, which yields highly crystallized perovskite films with micrometer-scale grains. Besides, we provide a thoughtful analysis of nucleation and growth based on the fabrication of the perovskite films. As a result, the highest photovoltaic power conversion efficiencies (PCE) of 19.70% and 20.31% are obtained for the planar and the meso-superstructured devices, respectively. This strategy sheds some light for understanding the film growth mechanism of high quality perovskite film, and it provides a facile strategy to fabricate high efficiency perovskite solar cells.     

新磷酸铝分子筛CFAP-2的合成与鉴定

新AlPO₄结晶分子筛相CFAP-2合成于TMEDA(N,N,N′,N′-四甲基乙基二胺)-P₂O₅-A1₂O₅-H₂O系统,反应物摩尔组成的范围是:TMEDA:P₂O₅:Al₂O₃:H₂O=(1-1.1):1:1:50,晶体形貌,X射线粉末衍射分析,热分析及红外光谱的研究表明:CFAP-2与A1PO₄-21的晶体结构不同,在350℃时,CFAP-2的原粉相转变为具有三维骨架孔结构的较稳定的结晶相。     

Voltammetric determination of trace amounts of gold(III) with a carbon paste electrode modified with chelating resin

A carbon paste electrode modified with chelating resin (ammino-isopropylmercaptan-type cross-linked chelating resins) for the voltammetric determination of gold(III) was characterized by cyclic voltammetry. The gold(III) ion is accumulated on the surface of the modified electrode only by the chelating effect of the modifier in the carbon paste, without application of a potential. After exchange of the medium the accumulated amount of gold(III) is determined by voltammetry in a blank electrolyte solution. The response depends on both the concentration of gold and the accumulation time. For a 5-min preconcentration time, a linear calibration graph was obtained in the range 3 × 10^?8-1 × 10^?6 M and the detection limit was about 1 × 10^?8 M. A combination of chemical and electrochemical renewal allows the use of a single modified electrode in multiple analytical determinations over several days. For ten preconcentration—determination—renewal cycles [2 × 10^?7 M Au(III)], the response could be reproduced with 4.7% relative standard deviation. Many parameters such as the composition of the paste and pH influence the response of the measurement. Many other metal ions have no or little effect on the determination of gold. The procedure was applied to the determination of gold in minerals, copper and anode mud, with good results.     

Synthesis of 5,6,7,8-tetrahydro-5-oxopyrido[2,3-d]pyrimidine-6-carbonitriles and -6-carboxylic acid esters

Dieckmann ring closure reactions of 4-[(2-cyanoethyl)substituted amino]-2-phenyl-5-pyrimidinecarboxylates (Ha-f) afforded several 5,6,7,8-tetrahydro-5-oxo-2-phenylpyrido[2,3-d]pyrimidine-6- carbonitriles (IIIa-f). The open-chain intermediates (IIa-f) were prepared by dechloroamination of 5-carbethoxy-4-chloro-2-phenylpyrimidine (1a) with several 3-substituted amino- propionitriles. Alkylation of the sodium salt of 5,6,7,8-tetrahydro-8-methyl-5-oxo-2-phenyl-pyrido[2,3-d]pyrimidine-6- carbonitrile (IIIa) with methyl iodide in DMF resulted in methylation at C-6 to afford IV. Tosylation of IIIa in pyridine gave the corresponding tosyl ester (V) of the enolic form. Oxidative dehydrogenation at the 6,7-position resulted when IIIa reacted with thionyl chloride, affording 5,8-dihydro-8-methyl-5-oxo-2-phenylpyrido[2,3-d]pyrimidine-6- carbonitrile (VII). Dechloroamination of la or 5-carbethoxy-4-chloro-2-methylthiopyrimidine (Ib) with ethyl 3-ethylaminopropionate followed by Dieckmann cyclization of the resulting open-chain intermediates gave the corresponding ethyl 5,6,7,8-tetrahydro-5-oxopyrido[2,3-d]pyrimidine-6-carboxylates IX'a and IX'b, respectively. These exist predominately in the enol form and undergo alkylation and oxidation reactions similar to IIIa.     

Thieno[2,3-d]pyrimidines. I. A new method for the preparation of esters and amides of thieno[2,3-d] pyrimidine-6-carboxylic acids

A novel method for the preparation of esters and amides of thieno[2,3-d]pyrimidine-6-carb-oxylic acids was described. A typical example was the direct formation of ethyl 5-amino-2-methylthiothieno[2,3-d]pyrimidine-6-earboxylate(IIIa) from 4-chloro-2-methylthio-5-pyrimidine-carbonitrile (Ia) and ethyl mercaptoacetate in refluxing ethanol containing sodium carbonate. Displacement of the methylthio group in IIIa by various amines gave the corresponding amino derivatives. The reactions of IIIa and related compounds with acetylating agents such as acetic anhydride or chloroacetyl chloride gave various products. Treatment of 5-carbethoxy-4-chloro-2-phenylpyrimidine(IV) with methyl mercaptoacetate afforded the dechloro intermediate diester Va, which cyclized on reaction with sodium ethoxide to form methyl 5-hydroxy-2-phenylthieno-[2,3-d]pyrimidine-6-carboxylate (Vla). The synthesis was expanded to include the preparation of various new 2,4,5-trisubstituted thieno[2,3-d]pyrimidine-6-carboxylic acid esters and amides (Charts I-V).     

Photobiological effects of UVA and UVB light in zebrafish embryos: evidence for a competent photorepair system

The consequences of UVB and UVA irradiation on hatch rate, mortality, and malformation were studied in embryonic zebrafish (Danio rerio). The use of zebrafish embryos has expanded from traditional developmental models to diverse studies, including many techniques utilizing light exposure. To characterize useful indicators of photodamage, the responses and threshold limits of UV radiation as a function of embryonic stage and fish source were evaluated. Significant differences in UVB susceptibility were observed in embryos at 3, 6-7, 12, and 24h post-fertilization (hpf), with the 1000-cell stage (3 hpf) having greatest tolerance to UVB. Embryos derived from zebrafish raised in outdoor ponds were more tolerant to UVB than were embryos from laboratory-raised fish. Combinations of UVB and UVA exposure were used to confirm the presence of a competent photorepair system in zebrafish that could return otherwise malformed embryos to a normal phenotype. Overall, embryonic zebrafish had large tolerances (LD(50) of 850 J/cm(2)) to UVA, confirming their suitability for photoactivation and photorepair studies.     

pH-Sensitive Dye-Polyether Derivatives as Dispersants for Its Parent Dye. Part 1: Synthesis and Hydrolysis Behavior

A series of dye-polyether derivatives, supposedly to be used as dispersants for parent dye, were synthesized by grafting poly(oxyalkylene)-amines based on differing both molecular weights and degrees of hydrophilicity/hydrophobicity, onto C.I. disperse red 60 via a stable urea linkage. The structures of the dye-polyether derivatives were characterized by FTIR, ¹H NMR, and SEC. The influence of pH on the hydrolysis behaviors of the dye-polyether derivatives were studied in buffered aqueous solutions within the pH range of 4 to 10. The hydrolysis of dye-polyether derivatives was pH dependent and relatively faster in mild alkaline buffer solution than in acidic one. The influence of poly(oxyalkylene)-amine structure on the hydrolysis behavior was also investigated; it was found that the hydrolysis rate is affected little by the molecular weight and increases with the increasing hydrophilicity of the poly(oxyalkylene)-amine.