反相高效液相色谱分离-安培法检测酚类化合物

本文报道了RP-HPLC-安培法检测测定酚类化合物的条件。在Shim-pack CLC-C_8柱上用含0.05mol/L NaH_2PO_4缓冲溶液的5％甲醇水溶液洗脱分离,于E+1.0V处检测。线性范围在0～7μg/ml,检测限达ng/ml。     

Mass spectral study of ring E of taraxasterol and compounds with similar ring substitution

The origin of the [M–69]⁺ and [M–111]⁺ signals in the mass spectrum of taraxasterol was studied through the use of C(18), (19), (21), (22) and/or (30) deuteriated derivatives. The generality of these signals for ring systems with an exocyclic methylene group and a methyl moiety on an adjacent carbon was verified with 2-methylmethylenecyclohexane, 1-methyl-2-methylene-trans-decalin, 1,10-dimethyl-2-methylene-trans-decalin and some of their deuteriated derivatives. The most plausible mechanism for the formation of the [M–69]⁺ ion appears to involve cleavage of both bonds allylic to the exocyclic methylene group with a 1,3-hydrogen transfer from the adjacent ring. Genesis of the [M–111]⁺ ion is more complicated but a five-membered allylic ion generated from ring D is proposed.     

Metal complex-substituted polysiloxanes as novel coatings for capillary electrophoresis and capillary electrochromatography

Two novel polysiloxane-based polymers, which contain metal complexes, have been prepared. To prepare the Co(TACN)3+(2) (TACN= 1,4,7-triazacyclononane) based polymers, an orthoamide derivative of TACN was added to bromobutane-substituted methylpolysiloxane and hydrolyzed with base. Co(II) was then coordinated to the TACN, followed by cobalt oxidation to make polymer A or followed by N-octyl TACN coordination and cobalt oxidation to make polymer B. In both materials, TACN forms thermodynamically and kinetically stable Co(TACN)3+(2) complexes in which the six coordination sites of the Co(III) are occupied by nitrogens from the TACN. The polymers were coated on fused-silica capillary columns and spherical silica particles, which were used for capillary electrophoresis and capillary electrochromatography, respectively. The open and packed columns showed strong and pH-independent reversed electroosmotic flow.     

In situ disorder-order transformation in synthetic gallosilicate zeolites with the NAT topology

Here, we report that synthetic gallosilicate molecular sieves with the NAT topology and Si/Ga ratios close to but slightly higher than 1.50 undergo an in situ transformation under their crystallization conditions. The materials have been studied ex situ by using powder X-ray diffraction, elemental and thermal analyses, and multinuclear MAS NMR. The transformation is characterized by a change in the distribution of Si and Ga of the NAT framework, from a quite (but not completely) disordered phase to a very highly (but not completely) ordered one, accompanied by a change from tetragonal to orthorhombic symmetry. During most of the solution-mediated transformation, no noticeable signs of fresh precipitation, phase segregation, or changes in the chemical composition are detected. Intermediate materials show variations in the degree of Si-Ga ordering and orthorhombic distortion and are not physical mixtures of the disordered and ordered phases. Ab initio calculations strongly suggest a preferential siting of Si in the tetrahedral sites involved in a smaller number of 4-rings in the NAT topology (i.e., the low multiplicity site). The cost of violations of Loewenstein's rule has also been calculated. For this topology and chemical composition the preferential siting and Loewenstein's rule drive together the system to the ordered configuration. A Monte Carlo sampling procedure affords a reasonable model for the initial, mainly disordered state, which fits well within the experimental disorder-order series.     

TiO2／Ti／TiO2半导体隔片光电化学电池的性能

研究了半导体隔片光电化学电池(SC-SEP)中光池溶液的pH、暗池溶液的氧化还原电对以及两池中的暗电极对电池的开路电压、光生电压、短路光电流和光伏安特性的影响。对它们的影响机制进行了初步分析。通过合理选择电池体系,SC-SEP的性能可比单隔室的光电化学电池(PEC)优越。     

Aqueous two-phase extraction as an effective tool for isolation of geniposide from gardenia fruit

Natural products are normally obtained by organic solvent extraction and many subsequent chromatographic separations. Compounds of interest are often isolated with very low yield and limited purity. An aqueous two-phase extraction process combined with a simple ethanol treatment, for removing excess inorganic salt, has been developed for preparation of geniposide from gardenia. The system was comprised of PE62, a random copolymer composed of 20% ethylene oxide and 80% propylene oxide, KH2PO4 and ethanol. To find optimal conditions, the partition behavior of geniposide under an aqueous two-phase system was investigated. Various factors were considered, including the concentration of salt, the concentration of polymer, the sample loading, and the addition of ethanol. The experimental results demonstrated that increasing salt concentration or decreasing PE62 concentration results in enhancement of the geniposide partition in the salt-rich phase. The addition of ethanol and higher sample loading also promoted the partition efficiency of geniposide. Based on this study, an optimized system containing 5% PE62, 7.5% KH2PO4, and 10% ethanol was tested on a large-scale extraction. A 39.0-g aliquot of final product (in powder form) with 77% purity of geniposide can be effectively extracted from 500 g of gardenia fruit. This process is proved to be useful for industrial application of geniposide preparation.     

Lanthanide triflate-catalyzed three component synthesis of alpha-amino phosphonates in ionic liquids. A catalyst reactivity and reusability study

The catalyst reactivity and reusability for the lanthanide triflate-catalyzed three component synthesis of alpha-amino phosphonates have been examined in room temperature ionic liquids, [bmim][X], in which the catalytic activities were very dependent on the counter anion, X, as well as on the phosphorus nucleophile, and moreover, the catalyst immobilized in an ionic liquid was reused several times without any loss of activity.     

Kinetics and mechanism of the pyridinolysis of phenacyl bromides in acetonitrile

Kinetic studies of the reactions of substituted phenacyl bromides (YC6H4COCH2Br) with pyridines (XC5H4N) are carried out in acetonitrile at 45.0 degrees C. A biphasic Bronsted plot is obtained with a change in slope from a large (betaX approximately equals 0.65-0.80) to a small (betaX approximately 0.36-0.40) value at pKa = 3.2-3.6, which can be attributed to a change in the rate-determining step from breakdown to formation of a tetrahedral intermediate in the reaction path as the basicity of the pyridine nucleophile increases. This mechanism is supported by the faster rates with pyridines than with anilines and the change of cross-interaction constant rhoXY from a large positive (rhoXY = +1.4) to a small positive (rhoXY approximately +0.1) value. The large magnitude of Hammett rhoX (= -5.5 to -6.9) values for the pyridines with electron-withdrawing substituents and positive deviations of the pi-acceptors, p-CH3CO and p-CN, are quite similar to those for the pyridinium ion formation equilibria. The activation parameters are also in line with the proposed mechanism.     

Temperature-dependent photoelectron spectroscopy of methyl benzoate anions: observation of steric effect in o-methyl benzoate

Temperature-dependent photoelectron spectra of benzoate anion (C6H5CO2(-)) and its three methyl-substituted isomers (o-, m-, p-CH3C6H4CO2(-)) have been obtained using a newly developed low-temperature photoelectron spectroscopy apparatus that features an electrospray source and a cryogenically controlled ion trap. Detachment channels due to removing electrons from the carboxylate group and benzene ring pi electrons were distinctly observed. Well-resolved vibrational structures were obtained in the lower binding energy region due to the OCO bending modes, except for o-CH3C6H4CO2(-), which yielded broad spectra even at the lowest ion trap temperature (18 K). Theoretical calculations revealed a large geometry change in the OCO angles between the anion and neutral ground states, consistent with the broad ground-state bands observed for all species. A strong steric effect was observed between the carboxylate and the methyl group in o-CH3C6H4CO2(-), such that the -CO2(-) group is pushed out of the plane of the benzene ring by approximately 25 degrees and its internal rotational barrier is significantly reduced. The low rotational barrier in o-CH3C6H4CO2(-), which makes it very difficult to be cooled vibrationally, and the strong coupling between the OCO bending and CO2 torsional modes yielded the broad PES spectra for this isomer. It is shown that there is no C-H...O hydrogen bond in o-CH3C6H4CO2(-), and the interaction between the carboxylate and methyl groups in this anion is found to be repulsive in nature.     

Particle dynamics and particle heat and mass transfer in thermal plasmas. Part III. Thermal plasma jet reactors and multiparticle injection

Thermal plasma processing involves complex interactions of particulates with plasmas. In previous studies (see Parts I and II of this series), an assessment of different effects has been made considering the dynamics and heat and mass transfer of a single particle immersed into a thermal plasma. The last paper of this sequence is concerned with the simulation of thermal plasma jet reactors and the effects caused by multiparticle injection.A mathematical model is proposed for the simulation of thermal plasma jet reactors, including the mixing phenomena between the jet and the surrounding gases by generalizing the governing equations for simple mixing flows. Also included is the density fluctuation effect by extending the K- model to a four-equation turbulence model combined with a probability density function. This model is internally consistent covering additional physical phenomena which are not covered by existing models. Unfortunately, its expected higher accuracy cannot be proven because of the present uncertainties associated with the input.For multiparticle injection, the simulation repeats calculations for single-particle injection, but with different initial conditions correcting the solutions by considering the coupling effects between particles and the plasma.The results indicate that (i) thermal plasmas show different mixing behavior in different gases; (ii) the density fluctuation effect is important since it causes large differences between the mass-weighted and unweighted time-averaged temperatures of thermal plasma jets; (iii) coupling effects become important when the particle loading rate exceeds half of the plasma mass flow rate; (iv) there are 16 constraints imposed on the modeling work which have to be considered for establishing a base for comparison with future experimental studies.