有机硅改性丙烯酸酯共聚乳液合成方法及胶膜性能的研究

用一次投料法、单体乳液滴加法和引发剂滴加法有机硅改性丙烯酸酯共聚乳液，聚合过程、胶粒形态及乳液稳定性的观测结果表明：单体乳液滴加法是合成该类乳液的最佳方法，研究了单体乳液滴加法中有机硅含量与聚合反及胶膜性能的关系，结果表明：有机硅含量在１５％以下时，聚合反应可以顺利进行，胶膜性能不仅依赖于聚合时有机硅单体的总量，而且还依赖于有机硅单体中活性硅氧烷所占的比例。     

Nonisothermal crystallization kinetics of poly(β-hydroxybutyrate)

Kinetics of nonisothermal crystallization of poly(β-hydroxybutyrate) from melt and glassy states were performed by differential scanning calorimetry under various heating and cooling rates. Several different analysis methods were used to describe the process of nonisothermal crystallization. The results showed that both Avrami treatment and a new method developed by combining the Avrami equation and Ozawa equation could describe this system very well. However, Ozawa analysis failed. By using an evaluation method, proposed by Kissinger, activation energies have been evaluated to be 92.6 kJ/mol and 64.6 kJ/mol for crystallization from the glassy and melt state, respectively. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1305–1312, 1998     

A(15)Tl(27) (A = Rb, Cs): A Structural Type Containing Both Isolated Clusters and Condensed Layers Based on the Tl(11) Fragment. Syntheses, Structure, Properties, and Band Structure

The isomorphous title compounds (and the ordered substitutional Rb(14)CsTl(27)) are obtained directly from reactions of the elements in sealed Ta below approximately 330 degrees C. Refinements of single-crystal data for the three established a structure with alternate layers of isolated pentacapped trigonal prismatic Tl(11)(7)(-) (D(3)(h)()) ions and condensed [Tl(16)(8-)] networks that are separated by cations. The condensed layer consists of Tl(11) units that share prismatic edges and are interbridged through waist-capping atoms (Tl(6/2)Tl(3)Tl(2)). (Rb(15)Tl(27): P&sixmacr;2m, Z = 1, a = 10.3248(6) ?, c = 17.558(2) ?.) The rubidium phase is a poor metal (rho(293) approximately 34 &mgr;Omega.cm) and is Pauli-paramagnetic. Extended Hückel band calculations indicate partially filled bands and a non-zero DOS at E(F), consistent with the observed metallic behavior, although appropriate cation tuning or modest anion doping should provide a Zintl phase. The band structure and COOP curves are also used to rationalize the distortion of the Tl(11) unit on condensation and the critical role of the interfragment bonds between waist-capping atoms in stabilizing the layer.     

Improvement of window thermal performance using aerogel insulation film for building energy saving

In buildings, windows have a major influence on space heating demand and indoor environment both with respect to climate and daylight. To reduce the window coefficient of the overall heat transmission, we use aerogel. Aerogels have a high surface area, low density, open pore structure, and excellent insulation properties. We mixed pressure sensitive adhesive and aerogel (10, 15, and 20 mass%) using a homogenizer. A mixture of the adhesives and silica aerogels attached film can reduce thermal conductivity. Silica aerogels are characterized by a surface area analyzer (BET), a Fourier transform infrared spectrometer, a thermogravimetry (TG) analyzer, and probe tack method. Thermal conductivity was measured by a TCi thermal conductivity analyzer.     

Radiosynthesis of 10-(2-[18F]fluoroethoxy)-20(S)-camptothecin as a potential positron emission tomography tracer for the imaging of topoisomerase I in cancers

The preparation of 10-(2-[¹⁸F]fluoroethoxy)-20(S)-camptothecin, a potential positron emission tomography tracer for the imaging of topoisomerase I in cancers, is described. 10-(2-[¹⁸F]Fluoroethoxy)-20(S)-camptothecin was synthesized by the [¹⁸F]fluoroalkylation of the corresponding hydroxy precursor molecule with 2-[¹⁸F]fluoroethyl bromide ([¹⁸F]FEtBr) in dimethylsulfoxide (DMSO) at 55 °C for 20 min; this was followed by purification using high performance liquid chromatography (HPLC) with a total preparation time of 60 min. The overall radiochemical yield was approximately 5.4–12 % (uncorrected), and the radiochemical purity was above 96 %.     

NH4^＋改型钾丝光沸石及其离子交换性

用铵盐改型钾丝光沸石,通过Ｘ－射线衍射,红外分析,分配系数,离子交换等温线及交换容量等的测定,就其结构及交换性能进行了研究;并与铵改型钠丝光沸石和天然斜发沸石等进行比较,表明ＮＨ４＾＋改型后的钾丝光沸石对Ｋ＾＋具有较高的交换容量和较好的Ｋ＾＋／Ｎａ＾＋分离效果。     

Study on the enzymatic polymerization mechanism of lactone and the strategy for improving the degree of polymerization

Polymerization of several lactones were carried out by employing Pseudomonas sp. lipase as the catalyst. The data indicate that water is consumed at the onset of polymerization and released in part during subsequent stages, leading us to propose a complex mechanism for the enzymatic polymerization of lactone. This mechanism involves both ring‐opening and linear condensation polymerization. The former was dominant at the early stage while the latter was dominant in the later stage. In addition, the reaction media showed complex influences on enzymatic polymerization. Some organic solvents increased the degree of polymerization (DP) and decreased the molecular weight distribution. A strategy to increase the molecular weight of the polymer is introduced, which led to the synthesis of a polymer with a number‐average molecular weight (M_n) of 14,500—the highest M_n of poly(ε‐caprolactone) prepared by enzyme‐catalyzed polymerization thus far—and molecular weight distribution of 1.23. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1265–1275, 1999     

同多酸和杂多酸修饰微电极的电化学研究 Ⅶ.磷钒钼杂多酸薄膜修饰微电极和杂多酸/聚苯胺薄膜修饰微电极的制备和电化学性质

本文详细描述了磷钒钼杂多酸（PV2Mo10）极薄膜修饰碳纤维（CF）微电极和PV2Mo10／聚苯胶（PAn）薄膜修饰微电极的制备及其电化学性质。     

Synthesis and characterization of ABA-type block copolymer of poly(trimethylene carbonate) with poly(ethylene glycol): Bioerodible copolymer

ABA-type block copolymers of poly(trimethylene carbonate) with poly(ethylene glycol) (M_n 6820), PTMC-b-PEG-b-PTMC, were synthesized by the ring-opening polymerization of 1,3-dioxan-2-one (trimethylene carbonate) in the presence of poly-(ethylene glycol) with stannous octoate catalyst, and the copolymers with various compositions were obtained. The PTMC-b-PEG-b-PTMC copolymers were characterized with Fourier transform infrared and nuclear magnetic resonance spectroscopies. The intrinsic viscosities of resulting copolymers increased with the increase of 1,3-dioxan-2-one content in feed while the molar ratio of monomer over catalyst kept constant. It has been observed that the glass transition temperature (T_g) of the PTMC segments in copolymers, recorded from differential scanning calorimetry, was dependent on the composition of copolymers. The melting temperature (T_m) of PEG blocks in copolymer was lower than that of PEG polymer, and then disappeared as the length of PTMC blocks increased. The results of dynamic contact angle measurement clearly revealed that the hydrophilicity of resulting copolymers increased greatly with the increase of PEG content in copolymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 695–702, 1998