锆对铂重整催化剂性能的影响规律

以正庚烷的转化为探针反应 ,研究了添加元素锆对铂重整催化剂性能的影响规律。结果表明 ,在 4 50℃和连续流动条件下 ,Pt/γ -Al2 O3催化剂中引入锆不仅能够提高铂催化剂的稳定性和芳构化产率、抑制氢解和异构化 ,而且能使铂催化剂保持初活性。锆含量在 0 .56%左右 ,其调变作用最为显著。     

富硒灵芝中一种新含硒蛋白的纯化、性质及其自由基清除活性研究

通过硫酸铵沉淀、离子交换层析和分子排阻层析等方法, 从富硒灵芝中获得了一种新的含硒蛋白, 命名为Se-GL-P, 并研究了此蛋白的性质、抗氧化活性与其硒含量间的关系. 结果表明, 此蛋白的分子量为36600, 分子中约含有19.8%的糖链, N端的氨基酸残基序列为DINGGGATLPQKLYLTPDVL, 属于DING蛋白家族. 硒含量为4.87 mg/g, 具有较高的羟自由基和超氧自由基清除活性. 研究发现, Se-GL-P的抗氧化活性的提高与其中硒含量的提高相关.     

Effects of the preparation methods on the properties of Ni-La2O3-SiO2 catalysts for m -dinitrobenzene hydrogenation

Ni-La₂O₃-SiO₂ catalysts were prepared by wetness impregnation and sol-gel method followed by conventional drying and supercritical drying, respectively. Their physico-chemical properties and activity for the hydrogenation of m-dinitrobenzene to m-phenylenediamine were investigated by BET, XRD, TPR, H₂-TPD and activity tests. The results showed that the structural and catalytic properties of the Ni-La₂O₃-SiO₂ catalysts obviously depended on the preparation method and the drying mode. The catalyst prepared by the sol-gel method in combination with conventional drying exhibited the highest catalytic activity among the catalysts tested, attributable to its well-dispersed nickel particles and larger active nickel surface area.     

室温制备高合金化Pt-Ru/CMK-3催化剂及其对甲醇的电催化氧化

通过低温络合反应制备了高分散高合金化的Pt-Ru固溶体, 并将其均匀地担载在有序介孔碳CMK-3上, 以形成二元复合金属催化剂. XRD谱图表明,fcc结构的Pt原子部分被hcp结构的Ru原子取代形成置换固溶体， 而且几乎没有未形成合金的Ru存在. TEM和XRD研究结果表明， Pt-Ru/CMK-3催化剂中Pt-Ru合金粒子的平均粒径为27 nm, 且具有良好的均一度. 还研究了催化剂对甲醇的电催化氧化性能, 并与E-TEK公司同类催化剂进行了对比, 研究结果表明, Pt-Ru/CMK-3催化剂具有较大的电化学活性面积, 对甲醇的电催化氧化性能和抗CO中毒能力明显优于其它同类催化剂.     

Chemoenzymatic Synthesis of Cellular Adhesion Tripeptide RGD Precursor in Organic Media

IntroductionA characteristic tripeptide sequence Arg-Gly-Asp(RGD) that is found within fibronectin and other rela-ted adhesion molecules in extracellular matrices(ECM)has received considerable attention from researcherssince it was proved to be a recognit…     

Reaction of triphenylphosphine with phenylethanethiolate-protected Au38 nanoparticles

The replacement of phenylethanethiolate (SC2Ph) ligands on 1.1 nm (core diameter) Au38(SC2Ph)24 monolayer-protected clusters (MPCs) with varied amounts of triphenylphosphine (PPh3) is investigated in methylene chloride. UV-vis spectra suggest that changes in the MPC Au core size occur when large amounts (> 10 equiv moles per cluster) of PPh3 are reacted with Au38(SC2Ph)24. 1H and 31P NMR spectra following the addition of smaller amounts (< 5 equiv moles) of PPh3 indicate that the reaction liberates a AuISC2Ph complex, as opposed to a SC2Ph thiol, disulfide, or anion. A 1H NMR kinetic study shows that the exchange is surprisingly rapid, even faster than exchanges of thiolates with other thiolates, at room temperature and in air. The reaction is slowed when cooled or conducted under Ar. The difference in potentials of the initial one-electron voltammetric reduction and oxidation of Au38(SC2Ph)24 decreases slightly upon reaction with small amounts of PPh3.     

Synthesis of alpha-MoTe2 nanorods via annealing Te-seeded amorphous MoTe2 particles

Semiconductor alpha-MoTe2 nanorods have been synthesized by annealing Te-seeded particles of an amorphous MoTe2 intermediate. This intermediate is prepared by a solution reaction between Mo(CO)6 and elemental Te in diphenylmethane. The as-synthesized products were characterized by structural, compositional, and morphological techniques of X-ray diffraction, selected area electron diffraction, selected area energy dispersive spectroscopy, energy dispersive X-ray analysis, X-ray photoelectron spectroscopy, transmission electron microscopy, and high-resolution transmission electron microscopy. The results of the annealing process are MoTe2 nanorods with diameters of 50-200 nm and lengths ranging from 0.1 to 3.0 microm. Here, the rodlike structure of MoTe2 is reported for the first time, and added to the list as one kind of new morphology of MoTe2 nanomaterials. A mechanism for the formation of the nanorods is proposed. The sandwich-layered structure of Te-Mo-Te and the similarity in the structure between hexagonal alpha-MoTe2 and hexagonal Te are responsible for the formation of nanorods of MoTe2.     

聚苯胺-富勒烯复合膜的光电响应

通过溶液共混方法制备了聚苯胺（PANI）-富勒烯复合膜, 并用IR、XRD、UV-Vis等技术对其进行表征.红外光谱表明聚苯胺与C60之间存在相互作用且表现为掺杂态聚苯胺红外谱图样.X射线衍射表明复合体材料的结晶性能增强.光致发光谱表明聚苯胺与C60分子之间存在有效光诱导电荷分离现象.光电响应实验表明复合体薄膜的光吸收增强, 光电流增大, 说明聚苯胺-富勒烯复合膜受光照射后发生了光诱导电荷分离现象, C60掺杂聚苯胺有助于改善光伏特性.     

A New Biochemical Way for Conversion of CO2 to Methanol via Dehydrogenases Encapsulated in SiO2 Matrix

CO2 is converted to nethanol through an enzymatic approach using formate dehydrogenase(FateDH),formaldehyde dehydrogenase(FaldDH）and alcohol dehydrogenase(ADH)coencapsulated in silica gel prepared by modified sol-gel process as catalysts,TEOS as precursor,NADH as an electron donor.The highest yield of methanol was up to 92.1% under 37℃,pH7.0 and 0.3Mpa.     

Polystyrene-supported Benzyl Selenide: An Efficient Reagent for Highly Stereocontrolled Synthesis of Substituted Olefins

Solid-phase methodology has been rapidly and extensively applied to the preparation of small organic molecules recently1. It might be argued that selenoxide syn-elimination provided the principal impetus for the development of organoselenium chemistry. In addition, the required selenoxides are readily available from the oxidation of the corresponding selenides, which in turn can be prepared by the reaction of selenium-stabilized carbanions with various electrophilic substrates2. However, or…