Properties of Graphene/Waterborne Polyurethane Nanocomposites Cast from Colloidal Dispersion Mixtures

Nanocomposites of waterborne polyurethane (WPU) reinforced with functionalized graphene sheets (FGSs) were effectively prepared by casting from a colloidal dispersion of FGS and WPU, and the morphology and physical properties were examined. The finer aqueous FGS dispersions or WPU with smaller particles yielded nanocomposites with enhanced electrical conductivity and thermal resistance due to finely dispersed FGS. The FGS nucleated the crystallization of the polycaprolactone (PCL) segments in WPU and improved its modulus. However, FGS inhibited crystal growth and deteriorated the tensile properties at high deformation, i.e., tensile strength and elongation at break, because the interaction between FGS and WPU hindered the chain rearrangement of WPU in the nanocomposite.     

Phase transition of samarium under high pressure

Abstract

The DAC X-ray power photograph method was employed for studing the phase transition of samarium up to 26.3 GPa. The experimental results show that the dhcp and fcc high pressure phase of Sm appeared at about 4.0 and 12.5 GPa and room temperature respectively. The dhcp phase was kept until 19.6 GPa. A model for Sm-type -? dhcp -? fcc phase transition is provided in this paper.     

Why to synthesize vaterite polymorph of calcium carbonate on the cellulose matrix via sonochemistry process?

Vaterite is an important biomedical material due to its features such as high specific surface area, high solubility, high dispersion, and small specific gravity. The purposes of this article were to explore the growth mechanism of vaterite on the cellulose matrix via sonochmistry process. In the work reported herein, the influences of experimental parameters on the polymorph of calcium carbonate were investigated in detail. The calcium carbonate crystals on the cellulose matrix were characterized by means of X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). Experimental results revealed that all the reactants, solvent, and synthesis method played an important role in the polymorph of calcium carbonate. The pure phase of vaterite polymorph was obtained using Na₂CO₃ as reactant in ethylene glycol on the cellulose matrix via sonochmistry process. Based on the experimental results, one can conclude that the synthesis of vaterite polymorph is a system process.     

Influence of SiNx:H film properties according to gas mixture ratios for crystalline silicon solar cells

The Hydrogenated silicon nitride (SiN_x:H) using plasma enhanced chemical vapor deposition is widely used in photovoltaic industry as an antireflection coating and passivation layer. In the high temperature firing process, the SiN_x:H film should not change the properties for its use as high quality surface layer in crystalline silicon solar cells. For optimizing surface layer in crystalline silicon solar cells, by varying gas mixture ratios (SiH₄ + NH₃ + N₂, SiH₄ + NH₃, SiH₄ + N₂), the hydrogenated silicon nitride films were analyzed for its antireflection and surface passivation (electrical and chemical) properties. The film deposited with the gas mixture of SiH₄ + NH₃ + N₂ showed the best properties in before and after firing process conditions.The single crystalline silicon solar cells fabricated according to optimized gas mixture condition (SiH₄ + NH₃ + N₂) on large area substrate of size 156 mm × 156 mm (Pseudo square) was found to have the conversion efficiency as high as 17.2%. The reason for the high efficiency using SiH₄ + NH₃ + N₂ is because of the good optical transmittance and passivation properties. Optimized hydrogenated silicon nitride surface layer and high efficiency crystalline silicon solar cells fabrication sequence has also been explained in this study.     

Phase transformations and structural characteristics of AL–Cu–Co(–Si) decagonal phase

The phase transformations and structural characteristics of the Al-Cu-Co-Si alloy have been studied by neutron diffraction and high-resolution electron microscopy. The Al₆₅Cu_17.5Co_17.5 decagonal phase is stable in the temperature range between 973 K and 1350 K. At the low-temperature end, it relaxes to a microcrystalline approximant structure. At the high-temperature end, it melts directly into liquid. Two distinct orthorhombic phases are identified in the Al₆₃Cu_17.5Co_17.5Si₂ microcrystalline structure. They are composed of several structure units that can also construct the Penrose tiling. Because of lack of units, a single orthorhombic phase cannot undergo the transformation towards the high-temperature decagonal phase. An analysis of the orientation relationships between the CsCl and orthorhombic phases leads to the definition of Penrose tiling-like subnetworks inside the orthorhombic unit cells so that these orthorhombic phases can be regarded as the periodic patchworks of quasiperiodic subnetworks.     

Harmonic Analysis on the Compact Homogeneous Spaces──about Fourier Multiplier ofH~P（M） Space

ＨａｒｍｏｎｉｃＡｎａｌｙｓｉｓｏｎｔｈｅＣｏｍｐａｃｔＨｏｍｏｇｅｎｅｏｕｓＳｐａｃｅｓ──ａｂｏｕｔＦｏｕｒｉｅｒＭｕｌｔｉｐｌｉｅｒｏｆＨ~Ｐ（Ｍ）Ｓｐａｃｅ￥ＤｏｎｇＤａｏｚｈｅｎ；ＺｈｅｎｇＸｕｅａｎ（ＨｅｎａｎＵｎｉｖｅｒｓｉｔｙ，Ｋａｉ?..     

三种降采样成像策略的性能优化以及与传统傅里叶望远镜的比较

为了获得成像质量较好且成像时间较少的新型傅里叶望远镜成像策略,本文比较了三种降采样成像策略(压缩感知方法 (CS)、低频全采样方法 (LF)和变密度随机采样方法 (VD))与传统傅里叶望远镜(FT)在图像质量和成像时间上的差异.分析方法如下:利用传统FT外场实验所获得的目标频谱数据作为基础,三种降采样方法 (LF, VD和CS)分别按照各自的采样模式和重构方法实现目标图像的重构;通过直观观察和Strehl比两种方法比较三种降采样方法与传统FT在图像质量上的差异;通过分析成像时间的组成要素,初步比较三种降采样方法与传统FT在成像时间上的差异.分析表明:1)压缩感知方法的图像质量优于其他两种降采样方法 (LF和VD),但略低于传统成像结果; 2)压缩感知方法在成像质量上略低于传统FT,但在成像时间上却明显小于传统FT; 3)分析中采用的外场数据均含噪声,这说明上述三种降采样重构过程对噪声有较好的鲁棒性.综合上述分析结果可以看出,基于压缩感知的傅里叶望远镜(CS-FT)是在实际含噪情况下可大幅减少成像时间的优良成像策略.     

Allyl phthalazinone synthesis,polymerization and polymer properties

A phthalazinone monomer with an allyl group, i.e. 4-（3-allyl-4-hydroxyphenyl）phthalazin-1（2H）-one, was synthesized and then copolymerized with 4-（4-hydroxylphenyl）（2H）-phthalazin-1-one and 2,6- diflurobenzonitrile by means of aromatic nucleophilic polycondensation to provide a series of crosslinkable poly（aryl ether nitrile）s. The virgin copolymers exhibited good solubility in polar organic solvents with relative high molecular weights （Mw： 45,130-58,403, inherent viscosities： 0.58-0.75 dL/ g）. After cross-linking, the thermal stability and solvent resistance of the polymer increased.     

The High Energy X-ray telescope (HE) onboard the Insight-HXMT astronomy satellite

The Insight-Hard X-ray Modulation Telescope(Insight-HXMT) is a broadband X-ray and γ-ray(1-3000 ke V) astronomy satellite. One of its three main telescopes is the High Energy X-ray telescope(HE). The main detector plane of HE comprises 18 Na I(Tl)/Cs I(Na) phoswich detectors, where Na I(Tl) is used as the primary detector to measure ~ 20-250 ke V photons incident from the field of view(FOV) defined by collimators, and Cs I(Na) is used as the active shielding detector to Na I(Tl) by pulse shape discrimination. Additionally, Cs I(Na) is used as an omnidirectional γ-ray monitor. The HE collimators have a diverse FOV,i.e. 1.1°×5.7°(15 units), 5.7°×5.7°(2 units), and blocked(1 unit). Therefore, the combined FOV of HE is approximately5.7°×5.7°. Each HE detector has a diameter of 190 mm resulting in a total geometrical area of approximately 5100 cm2, and the energy resolution is ~15% at 60 ke V. For each recorded X-ray event by HE, the timing accuracy is less than 10 μs and the deadtime is less than 10 μs. HE is used for observing spectra and temporal variability of X-ray sources in the 20-250 ke V band either by pointing observations for known sources or scanning observations to unveil new sources. Additionally, HE is used for monitoring the γ-ray burst in 0.2-3 Me V band. This paper not only presents the design and performance of HE instruments but also reports results of the on-ground calibration experiments.     

质子辐照硼硅酸盐玻璃盖片的物理效应分析

作为航天器电源系统的重要组成部分,太阳电池需要更高的转换效率和可靠性以及更长的使用寿命。通过在太阳电池表面覆盖抗辐照玻璃盖片,可以增强太阳电池对粒子辐射的防护,延长太阳电池的服役寿命,使航天器获得可靠的能源供应。硼硅酸盐玻璃就是一种理想的太阳电池玻璃盖片材料。采用蒙特卡罗方法,结合SRIM软件模拟研究质子辐照硼硅酸盐玻璃的损伤物理机理。基于粒子与物质相互作用的理论以及基本公式,通过分析不同入射能量的质子在硼硅酸盐玻璃中的阻止本领、电离能损、位移能损、空位的产生情况,对辐照损伤的物理机制进行研究。结果表明：能量为30～120 keV的质子辐照损伤主要发生在硼硅酸盐玻璃表面;质子沉积、空位分布等均为Bragg峰型分布;电离能损是能量损失的主要部分,随入射能量的增加而增大,导致电子的电离和激发;位移能损在玻璃内部随能量降低而增大,导致硼、氧和硅等空位缺陷的产生;电离效应和缺陷的产生是硼硅酸盐玻璃色心形成的重要原因。