时域有限差分法在光波导分析中的应用及改进

对时域有限差分算法在圆柱坐标下弱导光纤中应用时吸收边界条件的设置及其对计算精度的影响进行了讨论，提出了改善的方法。并且将这种方法应用于一般光纤和光电子晶体光纤传输特性的计算，得到了有用结果。     

光纤光栅的温度补偿

提出了一种简单、小型的光纤光栅温度补偿器件，将光纤光栅粘贴在具有负热膨胀系数的材料上，实现了光纤光栅的温度补偿。该器件在-20～44℃温度范围内光栅波长变化0.08m，是未补偿光纤光栅的1／8。     

一类非线性弹簧振子的周期性振动

本文用数值计算的方法讨论了一类非线性弹簧振子的周期性振动及其特点．     

Origin of enhanced Ge interdiffusion at the initial stage of Ge deposition on Si(5 5 12)-2 × 1: Tensile stress induced by substrate chain structures

By combined investigation of STM and synchrotron PES on Ge/Si(5 5 12)-2 × 1 at 530 °C, it has been found that, in addition to the upward-relaxed surface Si atoms, a subsurface Si atom is also readily replaced by an arriving Ge atom at the initial adsorption stage. Such enhanced interdiffusion is due to a unique character of one-dimensional chain structures of the reconstructed substrate, such as π-bonded and honeycomb chains not existing on other low-index Si surfaces such as Si(001)-c(4 × 2) and Si(111)-7 × 7, applying a tensile surface stress to the neighbouring subsurface atoms. Interdiffusion of Ge having lower surface energy induces adsorption of the displaced Si atoms on the surface to form sawtooth-like facets composed of (113)/(335) and (113)/(112) with arriving Ge atoms until the surface is filled with those facets. Such displacive adsorption is the origin of high Si concentration of formed facets.     

Sensitive determination of adenosine disodium triphosphate in soil,milk, and pharmaceutical formulation by enoxacin–europium (III) fluorescence complex in solution

A new spectroflurometric method for the determination of adenosine disodium triphosphate (ATP) is developed. Fluorometric interaction between ATP and enoxacin (ENX)–Eu³⁺ complex was studied using UV–vis and fluorescence spectroscopy. Weak luminescence spectra of Eu³⁺ were enhanced after complexation with ENX at 589 nm and 614 nm upon excitation at 395 nm due to energy transfer from the ligand to the lanthanide ion. It was observed that luminescence spectrum of Eu³⁺ was strongly enhanced further at 614 nm after incorporation of ATP into the ENX–Eu³⁺ complex. Under optimal conditions, the enhancement of luminescence at 614 nm was responded linearly with the concentration of ATP. The linearity was maintained in the range of 1.5×10^?10–1.15×10^?8 M (R=0.9973) with the limit of detection (3σ) of 4.71×10^?11 M. The relative standard deviation (RSD) for 9 repeated measurements of 1×10^?9  M ATP was 1.25%. Successful determinations of ATP in soil, milk, and a pharmaceutical formulation with the proposed method were demonstrated.     

A study of fluorescence properties of citrinin in β-cyclodextrin aqueous solution and different solvents

Citrinin (CIT) is a nephrotoxic mycotoxin initially isolated from filamentous fungus Penicilliu citrinum. It was later isolated from several other species, such as Aspergillus and Monascus. It has a conjugated, planar structure that gives it a natural fluorescence ability, which can be used to develop sensitive methods for detecting CIT in food. In this paper, we used the spectro?uorescence technique to study the effects of pH value, β-cyclodextrin (β-CD) and organic solvents on the CIT fluorescence intensity. The results show that lower pH value, aceitc acid, β-CD and acetonitrile can induce a higher fluorescence intensity of CIT, but methanol or H₂O has a decreasing effect on the fluorescence intensity of CIT. Findings in this study provide a theoretical basis for development of a high sensitivity fluorescence-based trace analysis for CIT detection.     

Photoluminescence properties of a new Eu2+-activated CaLaGa3S7 yellowish-green phosphor for white LED applications

A thiogallate chalcogenide phosphor CaLaGa₃S₇:Eu²⁺ was synthesized by a solid-state reaction at 950 °C in a H₂S atmosphere. The photoluminescence excitation,emission spectra, concentration quenching, fluorescence lifetime, and thermal quenching process of the phosphor were investigated in detail. It was found that the synthesized phosphor emitted intense and broadband yellowish-green light with a peak at 554 nm. Thus, the proposed phosphor is suitable for the development of blue or near UV LED. The critical dopant concentration of Eu²⁺ (R_c=15 Å) per unit formula was found to be 0.15 mol. At room temperature, the fluorescence lifetime of Eu²⁺ in CaLaGa₃S₇ was found to be 0.216 μs. The activation energy for thermal quenching was 0.29 eV. The chromaticity coordinates of our phosphor is very close in color to Y₃Al₅O₁₂:Ce³⁺. Therefore, CaLaGa₃S₇:Eu²⁺ can be a good alternative as a yellowish-green phosphor and can be used for white light generation in phosphor-converted LEDs.     

The influence of Au thickness on the structural,optical and electrical properties of ZnO/Au/ZnO multilayer films

Transparent and conductive ZnO/Au/ZnO (ZAZ) multilayer films were deposited on glass substrates by magnetron sputtering without intentional substrate heating. The thickness of Au interlayer was set at 1, 2 and 3 nm.The observed structural, optical and electrical properties were dependent on the thickness of the Au interlayer. For all of the ZAZ films, the diffraction peaks in the XRD pattern were identified as the (002) and (103) planes of a ZnO films and the (111) plane of an Au interlayer. The ZAZ films with a 2 nm thick Au interlayer showed a higher figure of merit than the other ZAZ films prepared in this study, and they also demonstrated the relatively high work function of 5.13 eV.From these results, we concluded that a ZAZ film with a 2 nm thick Au interlayer is an alternative candidate for use as a transparent electrode in OLEDs and various flat panel displays.     

A mathematical model of Schmidt corrector plate with defocus in variable for quick F ratio and large aperture systems

To make it easier for designing Schmidt optical systems, based on wavefront aberration functions, a mathematical model of the corrector plate aspheric surfaces varies as a function of defocusing amount is established. It corrects not only the third-order spherical aberration, but also the 5th-order spherical aberration for the system. A series of Schmidt optical systems were designed as examples to evaluate the mathematical model of the aspherics. Results show that the mathematical model is precisely in fitting the needed shape of the corrector, and can be used for the systems for quick F ratio and large aperture. A mathematical model for reflective correctors shape is also established.     

Enhanced photocatalytic activity of Cu-doped ZnO nanorods

Cu-doped ZnO nanorods with different Cu concentrations were synthesized through the vapor transport method. The synthesized nanorods were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and UV–vis spectroscopy. The XRD results revealed that Cu was successfully doped into ZnO lattice. The FE-SEM images showed that the undoped ZnO has needle like morphology whereas Cu-doped ZnO samples have rod like morphology with an average diameter and length of 60–90 nm and 1.5–3 μm respectively. The red shift in band edge absorption peak in UV-vis absorbance spectrum with increasing Cu content also confirm the doping of Cu in ZnO nanorods. The photocatalytic activity of pure and Cu-doped ZnO samples was studied by the photodegradation of resazurin (Rz) dye. Both pure ZnO and the Cu-doped ZnO nanorods effectively removed the Rz in a short time. This photodegradation of Rz followed the pseudo-first-order reaction kinetics. ZnO nanorods with increasing Cu doping exhibit enhanced photocatalytic activity. The pseudo-first-order reaction rate constant for 15 % Cu-doped ZnO is equal to 10.17×10^?2min^?1 about double of that with pure ZnO. The increased photocatalytic activity of Cu-doped ZnO is attributed to intrinsic oxygen vacancies due to high surface to volume ratio in nanorods and extrinsic defect due to Cu doping.