Design and Theoretical Study of Nickel Catalysts for Syndiotactic Polyolefins

A nickel catalyst was nodeled with ligand L^2,[NH=CH-CH=CH-0]^-,which should have potential use as a syndiotactic plyolefin catalyst,and the reaction mechanism was studied by theoretical calculations using the density functinal method at the B3LYP/LANL2MB level.The mechanism involves the formation of the intermediate [NiL^2Me]^ ,in which the metal occupies a T-shaped geometry.This intermediate has two possible structures with the methyl group trans either to the oxygen or to the nitrogen atom of L^2.The results show that both structures can lead to the desired product via similar reaction paths,A and B.Thus,the polymerization could be considered as taking place either with the alkyl group occupying the position trans to the Ni-0 or trans to the Ni-N bond in the catalyst.The polymerization process thus favors the catalysis of syndiotactic polyolefins.The syndiotactic synthesis effects could also be enhanced by varations in the ligand substituents.From energy considerations,we can conclude that it is more favorable for the methyl ttrans-O position to form a complex than to occupy the trans-N position.From bond length considerations,it is also more favoured for ethene to occupy the trans-O position than to occupy the trans-N position.     

锆氧杂环络合物合成方法探索

邻甲氧基苯基锂和 6,6-二甲基富烯 (或 6,6-二乙基富烯 )反应得配体锂盐 ( Cp′ Li) ,Cp′ Li直接和 Cp Zr Cl3· DME反应生成 2个新的锆络合物 Cp′ Cp Zr Cl2 。 BBr3和 Li Br分别用来使 Cp′ Cp Zr Cl2 环化 ,发现在相同条件下 BBr3比 Li Br3更有效。Cp′ Cp Zr Cl2 通过和 BBr3反应得到 2个新的锆氧杂环络合物。 4个新的锆络合物经元素分析、1 H NMR和 MS确证     

Two—dimensional Network Crown Ether Complex.Synthesis and Crystal Structure of 18—Crown—6 Complex：[K（18—C—6）]2[Cd—（nmt）2]

The novel complex [K(18-C-6)]2[Cd(mnt)2][18-C-6-18-crown-6,nmt=1,2-dicyanoethene-1,2-dithiolate,C2S2-(CN)2^2-] was synthesized and characterized by elemental analysis,IR spectrum and X-ray diffraction analysis.The complex displays two-dimensional network structure of [K(18-C-6)] complex segments and [Cd(nmt)2] complex segment bridged by S-K-S,S-K-N and N-K-N interactions between adjacent[K(18-C-6)] and [Cd(mnt)2]units.     

Renewable amperometric immunosensor for complement 3 assay based on the sol-gel technique

A renewable amperometric immunosensor based on the sol-gel technique has been constructed by dispersing graphite, complement 3 (C3) antiserum, and sol-gel at low temperature. The prepared immunosensor is rigid, porous, and has a renewable external surface. A competitive binding assay has been used to determine C3 in human serum with the aid of C3 labeled with horseradish peroxidase. The enzyme-labeled antigen can readily diffuse toward the encapsulated antibody, which retains its binding properties. The experimental conditions for the assay with the biocomposite, including the loading of C3 antiserum in the biocomposite, the amount of labeled C3 in incubation solution, incubation time, and temperature, have been optimized. Using C3 labeled with horseradish peroxidase, and o-AP as the substrate, amperometric detection at -150 mV (relative to the SCE) results in a linear detection range of 1.17-35.1 microg mL(-1), with a detection limit of 0.56 microg mL(-1). Serum samples have been assayed and the results demonstrate the feasibility of the proposed immunosensor for clinical analysis. The surface of the immunosensor can be renewed simply by polishing to obtain a fresh immunocomposite ready to use in a new competitive assay.     

Darstellung und Kristallstruktur von Na2Mn3O7

Synthesis and Crystal-Structure of Na₂Mn₃O₇ Single crystals of Na₂Mn₃O₇ have been grown hydrothermally applying high oxygen pressure (p = 2 kbar). The new compound cystallizes triclinic; space group P1 ; a = 6.636(6) Å, b = 6.854(6) Å, c = 7.548(6) Å, α = 105.76(6)°, β = 106.86(6)°, γ = 111.60(6)°; Z = 2. The crystal structure has been solved and refined to R = 7.9% and R_w = 6.2% (diffractometer data, 1044 independent reflexions). The crystal structure consists of Mn₃O₇^2? anions with manganese coordinated octahedrally by oxygen. These layered anions are hold together by Na⁺ ions (coordination numbers 5 and 6).     

Synthesis of pyrimido[4,5-e][1,4]oxazepin-5-ones

Eighteen novel pyrimido[4,5-e][1,4]oxazepin-5-ones were prepared directly via the reaction of either ethyl 4-chloro-2-phenyl-5-pyrimidinecarboxylate (Ia) or ethyl 4-chloro-2-m-chlorophenyl-5-pyrimidinecarboxylate (Ib) with a variety of substituted 2-(alkylamino)ethanols. A typical example was the preparation of 8,9-dihydro-9-methyl-2-phenylpyrimido[4,5-e][1,4]-oxazepin-5(7H)-one (IIa) from the reaction of Ia with 2-(methylamino)ethanol. Hydrolytic cleavage of the lactone ring in IIa with sodium hydroxide solution, followed by acidification with hydrochloric acid afforded 4-[(2-hydroxyethyl)methylamino]-2-phenyl-5-pyrimidinecarboxylic acid (IV). Reactions of IIa with concentrated ammonium hydroxide or hydrazine also caused cleavage of the lactone ring, giving the corresponding amide (V) or hydrazide (VI), respectively. Structural assignments were supported by infrared and nuclear magnetic resonance spectra.     

纳米CeO2的形貌控制与表征

以Ce(NO3)3·6H2O和(NH4)2CO3为沉淀源,利用柠檬酸作为络合剂和分散剂,实现了对CeO2前驱体的形貌和尺寸控制,并采用TEM,TGA和XRD等方法对前驱体及其热分解所得纳米CeO2的形貌及结晶性等进行了表征.结果表明,随着柠檬酸加入量的提高,前驱体形貌从纳米线向类球形颗粒变化,焙烧生成的纳米CeO2颗粒的形貌具有明显继承性,所得CeO2属于立方萤石结构,且随焙烧温度的提高,晶化程度增大.     

Thieno[2,3-d]pyrimidines. I. A new method for the preparation of esters and amides of thieno[2,3-d] pyrimidine-6-carboxylic acids

A novel method for the preparation of esters and amides of thieno[2,3-d]pyrimidine-6-carb-oxylic acids was described. A typical example was the direct formation of ethyl 5-amino-2-methylthiothieno[2,3-d]pyrimidine-6-earboxylate(IIIa) from 4-chloro-2-methylthio-5-pyrimidine-carbonitrile (Ia) and ethyl mercaptoacetate in refluxing ethanol containing sodium carbonate. Displacement of the methylthio group in IIIa by various amines gave the corresponding amino derivatives. The reactions of IIIa and related compounds with acetylating agents such as acetic anhydride or chloroacetyl chloride gave various products. Treatment of 5-carbethoxy-4-chloro-2-phenylpyrimidine(IV) with methyl mercaptoacetate afforded the dechloro intermediate diester Va, which cyclized on reaction with sodium ethoxide to form methyl 5-hydroxy-2-phenylthieno-[2,3-d]pyrimidine-6-carboxylate (Vla). The synthesis was expanded to include the preparation of various new 2,4,5-trisubstituted thieno[2,3-d]pyrimidine-6-carboxylic acid esters and amides (Charts I-V).     

黄原胶以三价铬交联的水凝胶的脱水行为

对黄原胶／三价铬水凝胶在７０，８０和９０℃下的脱水行为进行了研究．脱水与凝胶的交联密度即参与交联反应的三价铬的含量有密切联系．突发脱水之后的过程可以用一级反应动力学描述，反应速度常数随三价铬的浓度和温度的增高而增大，活化能为３４．５ｋｃａｌ／ｍｏｌ．一价盐（ＮａＣｌ）的含量对脱水过程没有影响．     

Effect of iron-containing catalysts on thermal decomposition of cured GAP-AP propellants

The effects of various burning rate catalysts on thermal decomposition of cured glycidyl azide polymer (GAP)-ammonium perchlorate (AP) propellants have been studied by means of thermal analysis and a modified vacuum stability test (MVST). Four types of iron-containing catalysts examined in this paper are catocene, ferrocenecarboxaldehyde (FCA), ferrocene, and ferric oxide. Results of differential thermal analysis (DTA) and thermogravimetric analysis (TG) revealed that the catalysts play an important role in the decomposition of both AP and GAP. The peak decomposition temperature (T _m) of DTA curves and onset decomposition temperature (T _o) of TG patterns considerably shifted to a lower temperature as the concentration of catalysts increased in the propellants. The endothermic temperature of AP, however, is unaffected by the presence of burning rate catalysts in all cases. The activation energy of decomposition of the propellants in range of 80 to 120°C is determined, based on the MVST results.