Alternating copolymer of thiophene andN‐(phenylethynyl)pyrrole. New π‐conjugated alternating five‐membered ring copolymer and its packing structure

An alternating copolymer, Copoly‐1 , of thiophene and N‐(phenylethynyl)pyrrole was prepared by palladium‐catalyzed polycondensation. Powder X‐ray diffraction (XRD) analysis indicated that Copoly‐1 formed a stacked packing structure with doubly‐running polymer main chains. Optical data support the molecular and packing structures of Copoly‐1 . © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2219–2224, 2005     

Gas chromatography-mass spectrometry of carbonyl compounds in cigarette mainstream smoke after derivatization with 2,4-dinitrophenylhydrazine

An improved gas chromatography-mass spectrometry (GC-MS) method was described for the analysis of carbonyl compounds in cigarette mainstream smoke (CMS) after 2,4-dinitrophenylhydrazine (DNPH) derivatization. Besides formaldehyde, acetaldehyde, acetone, acrolein, propionaldehyde, methyl ethyl ketone, butyraldehyde, and crotonaldehyde that are routinely analyzed in cigarette smoke, this technique separates and allows the analysis of several C4, C5 and C6 isomeric carbonyl compounds. Differentiation could be made between the linear and branched carbon chain components. In cigarette smoke, the branched chain carbonyls are found at higher level than the linear chain carbonyls. Also, several trace carbonyl compounds such as methoxyacetaldehyde were found for the first time in cigarette smoke. For the analysis, cigarette smoke was collected using DNPH-treated pads, which is a simpler procedure compared to conventional impinger collection. Thermal decomposition of DNPH-carbonyl compounds was minimized by the optimization of the GC conditions. The linear range of the method was significantly improved by using a standard mixture of DNPH-carbonyl compounds instead of individual compounds for calibration. The minimum detectable quantity for the carbonyls ranged from 1.4 to 5.6 microg/cigarette.     

Synthesis of 5,6,7,8-tetrahydro-5-oxopyrido[2,3-d]pyrimidine-6-carbonitriles and -6-carboxylic acid esters

Dieckmann ring closure reactions of 4-[(2-cyanoethyl)substituted amino]-2-phenyl-5-pyrimidinecarboxylates (Ha-f) afforded several 5,6,7,8-tetrahydro-5-oxo-2-phenylpyrido[2,3-d]pyrimidine-6- carbonitriles (IIIa-f). The open-chain intermediates (IIa-f) were prepared by dechloroamination of 5-carbethoxy-4-chloro-2-phenylpyrimidine (1a) with several 3-substituted amino- propionitriles. Alkylation of the sodium salt of 5,6,7,8-tetrahydro-8-methyl-5-oxo-2-phenyl-pyrido[2,3-d]pyrimidine-6- carbonitrile (IIIa) with methyl iodide in DMF resulted in methylation at C-6 to afford IV. Tosylation of IIIa in pyridine gave the corresponding tosyl ester (V) of the enolic form. Oxidative dehydrogenation at the 6,7-position resulted when IIIa reacted with thionyl chloride, affording 5,8-dihydro-8-methyl-5-oxo-2-phenylpyrido[2,3-d]pyrimidine-6- carbonitrile (VII). Dechloroamination of la or 5-carbethoxy-4-chloro-2-methylthiopyrimidine (Ib) with ethyl 3-ethylaminopropionate followed by Dieckmann cyclization of the resulting open-chain intermediates gave the corresponding ethyl 5,6,7,8-tetrahydro-5-oxopyrido[2,3-d]pyrimidine-6-carboxylates IX'a and IX'b, respectively. These exist predominately in the enol form and undergo alkylation and oxidation reactions similar to IIIa.     

An anomalous reaction of 10-chloro-5H-benzoxazolo[3,2-a]quinolin-5-one with sodium diethyl malonate to form 9-chloro-8-ethoxy-12-hydroxy-5H-dibenz[c,f]quinolizin-5-one

Treatment of 10-chloro-5H-benzoxazole[3,2-a]quinolin-5-one (I) with an excess of sodium diethyl malonate at 190° for 3 hours in hexamethylphosphoramide gave, in 38% yield, 9-chloro-8-ethoxy-12-hydroxy-5H-dibenz[c,f]quinolizin-5-one (IV) which, on heating with acetic anhydride, afforded monoacetylated product, V. A possible reaction mechanism for the novel ring expansion reaction is suggested.     

Itosides A – I,New Phenolic Glycosides from Itoa orientalis

Eight new benzoylated gentisyl alcohol (=2‐(hydroxymethyl)benzene‐1,4‐diol) glucosides, itosides A–H ( 1 – 8 ), together with the new pyrocatechol (=benzene‐1,2‐diol) glycoside itoside I ( 9 ) were isolated from the bark and twigs of Itoa orientalis (Flacourtiaceae). In itosides B–D ( 2 – 4 ), the gentisyl alcohol moiety was esterified by 1‐hydroxy‐6‐oxocyclohex‐2‐ene‐1‐carboxylic acid, while itosides E–H ( 5 – 8 ) contained instead an additional 2‐hydroxybenzoic acid moiety. The compounds were accompanied by the known derivatives 4‐hydroxytremulacin ( 10 ), poliothyrsoside ( 11 ), poliothyrsin ( 12 ), homaloside D ( 13 ), tremulacin, and pyrocatechol β‐D ‐glucopyranoside. The structures of the new compounds were elucidated by spectral and chemical methods.     

Stabilities in field electron emissions from noble‐metal covered W nano‐tips: apex structure dependence

We observed field emission microscopy (FEM) patterns of noble‐metal (NM) covered W nano‐tips with three different apex structures fabricated by field evaporation. Each of the three tips was terminated with a single atom, three atoms or ten atoms. We investigated the temporal changes in the FEM of these tips to discuss the stabilities in the spatial distributions of the field emission (FE) beams. The single‐atom tip showed two characteristics that were superior to the others. First, the beams emitted from the single‐atom tip were the most collimated among the three tips (the semi‐cone angle of 1.0° , FWHM). Second, adsorption of residual gas had little influence on FE from the single‐atom tip, while the other tips were easily contaminated even at ultra high vacuum, resulting in the emission fluctuation. Copyright © 2006 John Wiley & Sons, Ltd.     

Dispersion state of CuO on CeO2

XRD and XPS are used to study the dispersion state of CuO on ceria surface. The dispersion capacity values of CuO measured by the two methods are consistent, which are of 1.20 mmol CuO/100 m² CeO₂. In addition, the results reveal that highly dispersed Cu²⁺ ions are formed at low CuO loadings and that increasing the CuO content to a value higher than its dispersion capacity produces crystalline CuO after the surface vacant sites on CeO₂ are filled. The atomic composition of the outermost layer of the CuO/CeO₂ samples has been probed by using static secondary ion mass spectroscopy (SSIMS), and the ratim of Cu/Ce are found to be 0.93 and 0.46 for the 1.22 and 0.61 mmol CuO/CeO₂ samples respectively. Temperature-programmed reduction (TPR) profile with two reduction peaks at 156 and 165°C suggests that the reduction of highly dispersed Cu²⁺ ions consists of two steps and is easier than that of CuO crystallites, in which the TPR profile has only one reduction peak at about 249°C. The above experimental results are in good agreement with the prediction of the incorporation model. Project supported by the National Natural Science Foundation of China.     

16-脱氢孕烯醇酮醋酸酯的环境友好合成法

Instead of environmentally toxic chromium oxidant, singlet oxygen generated photcchemically was used as environmentally friendly and benign oxidizing agent to accomplish the transformation of pseudodiosgenin diacetate to diosone efficiently in a low toxic and less expensive solvent acetone. Accordingly 16-dehydropregnenolone acetate(16-DPA), an important intermediate for preparation of steroidal drugs, was prepared in good yield (75%) when photoreaction was run in acetone/acetic anhydride/pyridine system. The mild reaction condition as well as simple and environmentally friendly process made the method commercially viable and important for production of 16-DPA in industrial scale.     

Orientational ordering of a bent-core mesogen by two-dimensional 13C NMR spectroscopy

Various two-dimensional (2D) NMR techniques are reported on a bent-core mesogen 4,6-dichloro-1,3-phenylenebis[4'-(9-decenyloxy)-1,1'-biphenyl] carboxylate in its nematic and solid phases in order to unambiguously assign its carbon-13 NMR spectrum. The (13)C chemical shifts from the molecular core were studied as a function of temperature to extract its molecular geometry and orientational order tensor. To this end, the chemical shift anisotropy tensors of some carbon sites were measured in the solid state of this mesogen using a recent method called the separation of undistorted powder patterns by effortless recoupling (SUPER). The average bending angle subtended by the two arms of the bent-core structure is determined to be 148.7 degrees. The C-H dipolar couplings obtained from the separated local field (SLF) experiment for the aromatic rings are used to find the local order parameter tensors.     

Synthesis and Structure of the New Compound La2O(CN2)2 Possessing an Interchanged Anion Proportion Compared to the Parent La2O2(CN2). Synthese und Kristallstruktur der neuen Verbindung La2O(CN2)2 mit einem vertauschten Anionenverhältnis gegenüber der Bezugsverbindung La2O2(CN2)

La₂O(CN₂)₂ was synthesized from a 1:1:2 molar reaction mixture of LaCl₃, LaOCl, and Li₂(CN₂) at 650 °C. Well developed single crystals were grown from a LiCl‐KCl flux. The crystal structure was refined as monoclinic (space group C2/c, Z = 2, a = 13.530(2) Å, b = 6.250(1) Å, c = 6.1017(9) Å, β = 104.81(2)°) from single crystal X‐ray diffraction data. The La³⁺ and (CN₂)^2— ions in the crystal structure of La₂O(CN₂)₂ can be compared to Fe³⁺ and S₂^2— ions in the cubic pyrite structure, being arranged like in a distorted NaCl type structure with their centers of gravity. In addition, the O^2— ions in La₂O(CN₂)₂ are occupying 1/4 of the tetrahedral voids formed by the arrangement of metal ions.