Catalytic enantioselective synthesis of macrodiolides and their application in chiral recognition

New types of C₂-symmetric chiral macrodiolides are readily obtained via chiral N,N′-dioxide-scandium(iii) complex-promoted asymmetric tandem Friedel–Crafts alkylation/intermolecular macrolactonization of ortho-quinone methides with C3-substituted indoles. This protocol provides an array of enantioenriched macrodiolides with 16, 18 or 20-membered rings in moderate to good yields with high diastereoselectivities and excellent enantioselectivities through adjusting the length of the tether at the C3 position of indoles. Density functional theory calculations indicate that the formation of macrocycles is more favorable than that of 9-membered-ring lactones in terms of kinetics and thermodynamics. The potential utility of these intriguing chiral macrodiolide molecules is demonstrated in the enantiomeric recognition of aminols and chemical recognition of metal ions.

An asymmetric tandem Friedel–Crafts alkylation/intermolecular macrolactonization of ortho-quinone methides with C3-substituted indoles was achieved by using a chiral N,N′-dioxide-scandium(iii) complex.     

Spectroelectrochemical and Voltammetric Studies of L‐DOPA

The electrooxidation of L -dopa at GC electrode was studied by in situ UV-vis spectroelectrochemistry (SEC) and cyclic voltammetry. The mechanism of electrooxidation and some reaction parameters were obtained. The results showed that the whole electrooxidation reaction of L -dopa at glassy carbon (GC) electrode was an irreversible electrochemical process followed by a chemical reaction in neutral solution (EC mechanism). The spectroelectrochemical data were treated by the double logarithm method together with nonlinear regression, from which the formal potential E⁰=228 mV, the apparent electron-transfer number of the electrooxidation reaction αn=0.376 (R=0.99, SD=0.26), the standard electrochemical rate constant k⁰=(3.93±0.12)×10⁻4 cm s⁻¹ (SD=1.02×10⁻²), and the formation equilibrium constant of the following chemical reaction k_c=(5.38±0.34)×10⁻¹ s⁻¹ (SD=1.02×10⁻²) were also obtained.     

Studies on Liquid/liquid Extraction of Copper Ion with Room Temperature Ionic Liquid

Room temperature ionic liquids are regarded as “Green solvents” for their nonvolatile and thermally stable properties. They are employed to replace traditional volatile organic solvents in organic synthesis, solvent extraction, and electrochemistry. In this work, a water immiscible room temperature ionic liquid, 1‐butyl‐3‐methylimidazolium hexafluorophosphate [C₄mim][PF₆], was used as an alternative solvent for liquid/liquid extraction of copper ions. Metal chelators, including dithizone, 8‐hydroxyquinoline, and 1‐(2‐pyridylazo)‐2‐naphthol, were employed to form neutral metal‐chelate complexes with copper ions so that copper ions were extracted from aqueous solution into [C₄mim][PF₆]. The parameters that affect the extraction of copper ions with this biphasic system were investigated. The extraction behavior in this novel biphasic system is shown to be consistent with that of traditional solvents. For example, the extraction with this biphasic system is strongly pH dependent. So, the extraction efficiency of coppers ion from an aqueous phase can be manipulated by tailoring the pH value of the extraction system. Hence, the extraction, separation and preconcentraction of copper ions can be accomplished by controlling the pH value of the extraction system. It appears that the use of ionic liquid as an alternate solvent system in liquid/liquid extraction of copper ions is very promising.     

Synthesis and properties of aromatic poly(ester amide)s with pendant phosphorus groups

Two series of phosphorus‐containing aromatic poly(ester amide)s with inherent viscosities of 0.46–3.20 dL/g were prepared by low‐temperature solution polycondensation from 1,4‐bis(3‐aminobenzoyloxy)‐2‐(6‐oxido‐6H‐dibenz〈c,e〉〈1,2〉oxaphosphorin‐6‐yl)naphthalene and 1,4‐bis(4‐aminobenzoyloxy)‐2‐(6‐oxido‐6H‐dibenz〈c,e〉〈1,2〉oxaphosphorin‐6‐yl)naphthalene with various aromatic diacid chlorides. All the poly(ester amide)s were amorphous and readily soluble in many organic solvents, such as N,N‐dimethylformamide, N,N‐dimethylacetamide (DMAc), and N‐methyl‐2‐pyrrolidone (NMP). Transparent, tough, and flexible films of these polymers were cast from DMAc and NMP solutions. Their casting films had tensile strengths of 71–214 MPa, elongations to break of 5–10%, and initial moduli of 2.3–6.0 GPa. These poly(ester amide)s had glass‐transition temperatures of 209–239 °C (m‐series) and 222–267 °C (p‐series). The degradation temperatures at 10% weight loss in nitrogen for these polymers ranged from 462 to 489 °C, and the char yields at 800 °C were 55–63%. Most of the poly(ester amide)s also showed a high char yield of 35–45%, even at 800 °C under a flow of air. The limited oxygen indices of these poly(ester amide)s were 35–46. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 459–470, 2002; DOI 10.1002/pola.10129     

Synthesis and characterization of temperature‐ and pH‐sensitive hydrogels based on poly(2‐ethyl‐2‐oxazoline) and poly(D,L‐lactide)

A novel series of temperature‐ and pH‐sensitive hydrogels based on poly(2‐ethyl‐2‐oxazoline) and three‐arm poly(D,L ‐lactide) were synthesized via photocopolymerization. For the creation of polymeric networks, two types of macromers terminated with methacrylate groups were prepared: poly(2‐ethyl‐2‐oxazoline) dimethacrylate and three‐arm poly(D,L ‐lactide) trimethacrylate. The chemical structures were analyzed with ¹H NMR and Fourier transform infrared techniques. The thermal behaviors, morphologies, and swelling properties were measured for the characterization of the polymeric networks. All the poly(2‐ethyl‐2‐oxazoline)/three‐arm poly(D,L ‐lactide)hydrogels provided high water retention capacity and exhibited reversible swelling–shrinking behavior in response to temperature and pH variations. The hydrogels with higher poly(2‐ethyl‐2‐oxazoline) dimethacrylate contents were more effective in raising the swelling ratio and temperature and pH sensitivity. However, higher contents of three‐arm poly(D,L ‐lactide) trimethacrylate produced larger particles and pore sizes in the hydrogels. This study effectively proves that this unique combination of water swellability and biodegradability provides hydrogels with a much wider range of applications in biomedical fields. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1112–1121, 2002     

Structure‐Dependent Photoinduced Electron Transfer in Fullerodendrimers with Light‐Harvesting Oligophenylenevinylene Terminals

Oligophenylenevinylene (OPV)‐terminated phenylenevinylene dendrons G1 – G4 with one, two, four, and eight “side‐arms”, respectively, were prepared and attached to C₆₀ by a 1,3‐dipolar cycloaddition of azomethine ylides generated in situ from dendritic aldehydes and N‐methylglycine. The relative electronic absorption of the OPV moiety increases progressively along the fullerodendrimer family C₆₀G1 – C₆₀G4 , reaching a 99:1 ratio for C₆₀G4 (antenna effect). UV/Vis and near‐IR luminescence and transient absorption spectroscopy was used to elucidate photoinduced energy and electron transfer in C₆₀G1 – C₆₀G4 as a function of OPV moiety size and solvent polarity (toluene, dichloromethane, benzonitrile), taking into account the fact that the free‐energy change for electron transfer is the same along the series owing to the invariability of the donor–acceptor couple. Regardless of solvent, all the fullerodendrimers exhibit ultrafast OPV→C₆₀ singlet energy transfer. In CH₂Cl₂, the OPV→C₆₀ electron transfer from the lowest fullerene singlet level (¹C₆₀*) is slightly exergonic (ΔG_CS≈0.07 eV), but is observed, to an increasing extent, only in the largest systems C₆₀G2 – C₆₀G4 with lower activation barriers for electron transfer. This effect has been related to a decrease of the reorganization energy upon enlargement of the molecular architecture. Structural factors are also at the origin of an unprecedented OPV→C₆₀ electron transfer observed for C₆₀G3 and C₆₀G4 in apolar toluene, whereas in benzonitrile, electron transfer occurs in all cases. Monitoring of the lowest fullerene triplet state by sensitized singlet oxygen luminescence and transient absorption spectroscopy shows that this level is populated through intersystem crossing and is not involved in photoinduced electron transfer.     

Fused quinoline heterocycles VI: Synthesis of 5H‐1‐thia‐3,5,6‐triazaaceanthrylenes and 5H‐1‐thia‐3,4,5,6‐tetraazaaceanthrylenes

Ethyl 3‐amino‐4‐chlorothieno[3,2‐c]quinoline‐2‐carboxylate ( 4 ) is a versatile synthon, prepared by reacting an equimolar amount of 2,4‐dichloroquinoline‐3‐carbonitrile ( 1 ) with ethyl mercaptoacetate ( 2 ). Ethyl 5‐alkyl‐5H‐1‐thia‐3,5,6‐triazaaceanfhrylene‐2‐carboxylates 9a‐c , novel perianellated tetracyclic heteroaro‐matics, were prepared by refluxing 4 with excess of primary amines 7a‐c to yield the corresponding amino‐thieno[3,2‐c]quinolines 8a‐c . Subsequent reaction with an excess of triethyl orthoformate (TEO) furnished 9a‐c . Reaction of 4 with TEO in Ac₂O at reflux, gave the simple acetylated compounds, thieno[3,2‐c]‐quinolines 12 and 13 . Refluxing 4 with benzylamine ( 7d ) gave 10 , and subsequent treatment with TEO gave the tetracyclic compound 11 . Refluxing 13 with an excess of alkylamines 7a‐d gave the fhieno[3,2‐c]quino‐lines 15 . Refluxing the aminothienoquinolines 8b with an excess of triethyl orthoacetate gave thieno[3,2‐c]quinoline 17 , while heating with Ac₂O gave 18 and 19 , with small amounts of 16 . Reaction of 8a,b with ethyl chloroformate and phenylisothiocyanate generated the new 1‐thia‐3,5,6‐triazaaceanthrylenes 20a,b and 21a,b , respectively. Diazotization of 8a‐c afforded the novel tetracyclic ethyl 5‐alkyl‐5H‐1‐fhia‐3,4,5,6‐tetraazaaceanthrylene‐2‐carboxylates 22a‐c in good yields.     

Syntheses and Crystal Structures of Cadmium Complexes with Thiophenedicarboxylate and Bipyridine‐like Ligands

Two new coordination polymers [Cd(tdc)(bpy)(H₂O)]_n ( 1 ) and [Cd(tdc)(phen)]_n ( 2 ) (H₂tdc = thiophene‐2,5‐dicarboxylic acid, bpy = 2,2′‐bipyridine and phen = 1,10‐phenanthroline) have been synthesized under hydrothermal condition. Their crystal structures have been established by X‐ray single‐crystal diffraction. Complex 1 crystallizes in the orthorhombic space group Fdd2 with a = 14.757(7), b = 45.38(2), c = 10.518(5) Å, V = 7044(6) ų, Z = 16; 2 in the monoclinic space group P2₁/c with a = 7.262(1), b = 21.970(2), c = 10.051(1) Å, β = 105.01(1)°, V = 1548.8(2) ų, Z = 4. Both of them are double‐stranded chains and further assembled into three‐dimensional networks by π‐π stacking interactions. 1 and 2 are stable in air, and show blue photoluminescence at 415 nm and 410 nm, respectively.     

Synthesis, Characterization and Two-Photon Absorption Properties of a Novel Pyridinium Salt

A novel pyridinium salt, 2,4-bis[p-(N,N-dimethylamino)styryll-N-metlayl pyridinium iodide (BMSPI) was synthesized and characterized by TG, ^1H NMR spectroscopy and elemental analysis, and the reaction process was studied by using ES-MS. When BMSPI was pumped by a pulsed 1064 nm, 50 ps laser beam, it manifests highly efficient TPA (Two-Photon Absorption) and up-conversion superradiance. The up-conversion efficiency was 6.0% at the pump energy of 4-6 mJ and the lifetime of two-photon fluorescence was measured as 59 ps.     

Dynamic identification of phosphopeptides using immobilized metal ion affinity chromatography enrichment, subsequent partial beta-elimination/chemical tagging and matrix-assisted laser desorption/ionization mass spectrometric analysis

The enrichment of phosphopeptides using immobilized metal ion affinity chromatography (IMAC) and subsequent mass spectrometric analysis is a powerful protocol for detecting phosphopeptides and analyzing their phosphorylation state. However, nonspecific binding peptides, such as acidic, nonphosphorylated peptides, often coelute and make analyses of mass spectra difficult. This study used a partial chemical tagging reaction of a phosphopeptide mixture, enriched by IMAC and contaminated with nonspecific binding peptides, following a modified beta-elimination/Michael addition method, and dynamic mass analysis of the resulting peptide pool. Mercaptoethanol was used as a chemical tag and nitrilotriacetic acid (NTA) immobilized on Sepharose beads was used for IMAC enrichment. The time-dependent dynamic mass analysis of the partially tagged reaction mixture detected intact phosphopeptides and their mercaptoethanol-tagged derivatives simultaneously by their mass difference (-20 Da for each phosphorylation site). The number of new peaks appearing with the mass shift gave the number of multiply phosphorylated sites in a phosphopeptide. Therefore, this partial chemical tagging/dynamic mass analysis method can be a powerful tool for rapid and efficient phosphopeptide identification and analysis of the phosphorylation state concurrently using only MS analysis data.