An accurate determination of the triple point temperature of pure 20Ne and 22Ne

The paper reports on new determinations at INRIM of the triple point temperature of pure neon isotopes ²⁰Ne and ²²Ne, obtained on samples sealed in cryogenic cells and measured with an uncertainty much lower than that of the previous determinations. The experimental technique is the same used at INRIM for recent studies on neon of natural-isotopic composition, showing an expanded uncertainty of ≈30 μK for a single cell and ≈50 μK for the comparison of sample pairs. The determinations were mainly intended to obtain a more accurate value of the temperature difference for the two pure isotopes, found to be 0.14660 K with an expanded uncertainty of 0.00007 K. The temperature values were found to be 24.5422 K for ²⁰Ne and 24.6888 K for ²²Ne on ITS-90, but each with a larger expanded uncertainty, 0.00032 K. This is mainly caused, contrarily to the difference, by each of these values being affected by the present ambiguity of the ITS-90 definition. This definition refers to neon generically to ‘natural’ composition, while its uncorrected variability heavily affects the uncertainty of the thermometer calibrations. These results for pure isotopes are compared with those recently obtained at INRIM on samples of commercial neon of natural composition and with literature data. The problems involved in the correction for the residual content of isotopic impurities and for chemical impurities are discussed.     

Hyperpigmentation induced by topical 5-aminolaevulinic acid plus visible light

Photodynamic therapy (PDT) with 5-aminolaevulinic acid (ALA) is an alternative tool for the treatment of superficial non-melanoma skin cancers. Recently ALA-PDT has been employed with encouraging results also for warts, condylomata and psoriasis. In this study the effects of topical ALA plus irradiation with visible light on intact human skin have been evaluated. Five skin areas (A, B, C, D, and E) on the inner upper part of the arms of five healthy volunteers (skin types III and IV) were treated with (A) ALA 20% in base cream without irradiation, (B) only the vehicle (base cream) without ALA, (C, D and E) ALA cream at the concentrations of 5, 10 and 20%, respectively; all treatments were applied with an occlusive dressing. Four hours after ALA or vehicle application areas B, C, D and E were irradiated with a fixed dose of 40 J/cm(2). ALA penetration through the intact skin was evaluated by in vivo fluorescence determination. The effects on healthy skin were evaluated by clinical and chromometric examinations, light microscopy, immunohistochemistry and electron microscopy. RESULTS: (1) in vivo fluorescence demonstrated that ALA is able to penetrate through the intact skin, when applied with occlusive dressing and induces a classical fluorescence peak due to Protoporphyrin IX (PpIX) formation, which is the active photosensitiser. (2) Skin areas receiving ALA plus irradiation showed erythema and swelling just after the irradiative session and hyperpigmentation 48-72 h later. (3) Colourimetric data confirmed significant skin colour changes: values a* (representing the erythematous changes) increased only on the skin areas where ALA+irradiation were applied and during the 48 h after irradiation, thereafter a* began to decrease; values L* (pigmentation) increased during the 2 weeks following treatment. (4) Histopathological, immunohistochemical (S100, HMB-45) and electron microscopic findings showed an absolute increment of the number of melanocytes, which appeared clearly activated. In conclusion the application of ALA cream followed by irradiation is able to induce a pigmentation response in healthy human skin, at least in skin types III and IV. This melanocytic activation could have a potential for the treatment of skin disorders characterised by hypopigmentation.     

Second-generation mimics of ganglioside GM1 oligosaccharide: a three-dimensional view of their interactions with bacterial enterotoxins by NMR and computational methods

As a step to delineate a strategy of ligand design for cholera toxin (CT), NMR studies were performed on several mimics of the GM1 ganglioside oligosaccharide. The conformation of these analogues was investigated first in solution and then upon binding to cholera toxin by transferred nuclear Overhauser effect (TR-NOE) measurements. It was demonstrated that CT selects a conformation similar to the global minima of the free saccharides from the ensemble of presented conformations. No evidence of major conformational distortions was obtained, but one or two of the available conformers of the hydroxyacid side chain appear to be selected in the bound state. The NMR data were interpreted with the aid of computer models, generated and analyzed by using a combination of different approaches (MacroModels' MC/EM and MC/SD, Autodock, and GRID). Analysis of the NMR data supported by computational studies allowed us to interpret the experimental observations and to derive workable models of the ligand:toxin complexes. These models suggest that the higher affinity of the (R)-lactic acid derivative 3 may stem from lipophilic interactions with a hydrophobic area in the toxin binding site located in the vicinity of the sialic acid side chain binding region of the CT:GM1 complex, and formed by the side chain of Ile-58 and Lys-34. Thus, the models obtained have allowed us to make useful design suggestions for the improvement of ligand affinity.     

The reactions of some halogenated pyridines with methoxide and methanethiolate ions in dimethylformamide

The reactions of 2,6- and 2,5-dibromopyridines and of 2,3- and 3,5-dichloropyridines with sodium isopropanethiolate and methanethiolate afforded the products of mono- or of bis-substitution depending on the experimental conditions. The same pyridines reacted with sodium methoxide to give good yields of the mono-substituted products; bis-substitution occurred easily only in the case of the 2,6-dibromo- and of the 3,5-dichloropyridine. The syntheses of some methoxy thiomethoxypyridine, starting from the halogeno methoxypyridines or from the halogeno thiomethoxypyhdines are also described. The bis-(alkylthio)pyridines can be fragmented by sodium in HMPA to give the bis(mercapto)pyridines.     

Increasing Complexity in Adamantyl Thioethers Characterized by Rotational Spectroscopy

We report on the synthesis and characterization using high-resolution rotational spectroscopy of three bulky thioethers that feature an adamantyl group connected to a sulfur atom. Detailed experimental and theoretical structures are provided and compared with the 1,1′-diadamantyl ether. In addition, we expand on previous findings concerning microsolvation of adamantyl derivatives by investigating the cluster formation between these thioethers and a water molecule. The investigation of such clusters provides valuable insights into the sulfur-centered hydrogen bonding in thioethers with increasing size and steric repulsion.     

Electronic nose screening of limonene release from multicomponent essential oils encapsulated in pectin gels

Multicomponent essential oils Tagetes Minuta and Poleo as well as pure limonene were encapsulated in Tween doped-high methoxylated pectin gels. Optical microscopy reveals that the obtained gels containing limonene consisted in a highly heterogeneous oil-in-water emulsion stabilised by the gelled medium. The influence of limonene encapsulation in pectin gelation kinetics and the gel structural properties were followed by dynamic rheological measurements. An electronic nose device developed in our laboratory was used to follow the flavour release of the three systems in order to discriminate the samples according to the main components released to the headspace. PCA and Neural Network Analysis allowed us to discriminate Tagetes Minuta from Poleo due to the difference in their limonene content. It is remarkable that the fingerprints of encapsulated complex mixtures differ from those obtained for the non-encapsulated oils, showing a preferential release of some components. In the case of limonene, the effect of the encapsulated concentration on the detected odour was also studied.     

Determination of the Chemical Structure of Poly-β (-)-pinene by NMR Spectroscopy

This paper is dedicated to the memory of our friend and colleague Annalaura Segre.

The chemical structure of a series of β (-)-pinene polymers (PBP) obtained by radiation-induced polymerization, free radical initiation, cationic polymerization over a Friedel-Craft catalyst and by coordinative polymerization over a Ziegler-Natta catalyst has been fully elucidated by ¹H and ¹³C-NMR spectroscopy. 2D NMR techniques have been applied in order to assign all the NMR resonances to the structures of the PBP investigated. The NMR spectra show that the most regular PBP structure is obtained by radiation-induced polymerization followed by the free radical initiated polymerization. The most defective structure has been observed in the case of PBP prepared by cationic mechanism over a Friedel-Crafts catalyst. The discussion accounts for different types of defects and cross-links present in the PBPs investigated whose fundamental structure is based on the p-menthene repeating unit.

NMR self-diffusion measurements have been performed to evaluate the molecular weight of all the PBP investigated. The highest molecular weight (2600 Dalton) was found in the case of PBP prepared by Ziegler-Natta catalyst, while the lowest molecular weight was found in the case of PBP prepared by radiation-induced polymerization (about 1000 Dalton).     

Glutamate receptor incorporated in a mixed hybrid bilayer lipid membrane array, as a sensing element of a biosensor working under flowing conditions

The realization of a reliable receptor biosensor requires stable, long-lasting, reconstituted biomembranes able to supply a suitable biomimetic environment where the receptor can properly work after incorporation. To this end, we developed a new method for preparing stable biological membranes that couple the biomimetic properties of BLMs (bilayer lipid membranes) with the high stability of HBMs (hybrid bilayer membranes); this gives rise to an innovative assembly, named MHBLM (mixed hybrid bilayer lipid membrane). The present work deals with the characterization of biosensors achieved by embedding an ionotropic glutamate receptor (GluR) on MHBLM. Thanks to signal (transmembrane current) amplification, which is typical of natural receptors, the biosensor here produced detects glutamate at a level of nmol L(-1). The transmembrane current changes linearly vs glutamate up to 100 nmol L(-1), while the limit of detection is 1 nmol L(-1). In addition, the biosensor response can be modulated both by receptor agonists (glycine) and antagonists (Mg(2+)) as well, and by exploiting the biosensor response, the distribution of different kinds of ionotropic GluR present in the purified sample, and embedded in MHBLM, was also evaluated. Finally, one of the most important aspects of this investigation is represented by the high stability of the biomimetic system, which allows the use of biosensor under flowing conditions, where the solutions flow on both biomembrane faces.     

Mechanistic studies on the asymmetric alkylation of amino ester enolates using a copper(II)salen catalyst

Hammett data indicate that the asymmetric alkylation of enolates catalysed by copper(II)salen complex 1, proceeds by an asynchronous S(N)2 reaction and that the role of the catalyst is to enhance the nucleophilicity of the enolate.