High-field magnetic resonance imaging using solenoid radiofrequency coils

High-resolution magnetic resonance imaging using dedicated high-field radiofrequency micro-coils at 16.4 T (700 MHz) was investigated. Specific solenoid coils primarily using silver and copper as conductors with enamel and polyurethane coatings were built to establish which coil configuration produces the best image. Image quality was quantified using signal-to-noise ratio and signal variation over regions of interest. Benchmarking was conducted using 5-mm diameter coils, as this size is comparable to an established coil of the same size. Our 1.4-mm-diameter coils were compared directly to each other, from which we deduce performance as a function of conductor material and coating. A variety of materials and conductor coatings allowed us to choose an optimal design, which we used to image a kidney section at 10-micron resolution. We applied zero-fill extrapolation to achieve 5-micron resolution.     

Bis(dichlorosilyl)methylamine – Synthesis,Crystal Structure,and Conformational Analysis in the Gas Phase

A straightforward preparation has been found for bis(dichlorosilyl)methylamine, (SiHCl₂)₂NMe ( 1 ), involving reaction between H₂NMe and an excess of SiHCl₃, dissolved either in pentane or THF at 253 K. 1 and a side‐product, 1,3,5‐trichloro‐2,4,6‐trimethylcyclotrisilazane, (–SiHCl–NMe–)₃ ( 2 ), were identified by elemental analysis, mass spectrometry and ¹H‐NMR‐spectroscopy. Some physical, NMR‐ and IR spectroscopical properties of 1 were determined. The molecular and crystal structure of 1 was investigated by single crystal X‐ray diffraction. Selected structural parameters: r(Si–N) 169.7(5), r(Si–Cl) 203.1(2)–204.4(2), r(C–N) 150.0(8) pm; a(SiNSi) 123.6(3), a(SiNC) 118.3(4)/118.0(4)°. Ab initio force field data and infrared intensities were calculated for four conformers of 1 . Comparison of the observed and calculated IR spectra favours the two structures found ab initio provided that their actual abundancies are different from those calculated.     

The putative Diels-Alderase macrophomate synthase is an efficient aldolase

We find that the putative Diels-Alderase macrophomate synthase (MPS) catalyzes the addition of pyruvate enolate, generated by decarboxylation of oxaloacetate, to a variety of aldehydes. Alkyl, aryl, and heteroaryl aldehydes are accepted as substrates, providing gamma-hydroxy-alpha-ketoacids in 35-95% yield with modest levels of stereochemical control. These aldol products, which are difficult to synthesize by other methods, are formed with efficiency comparable to that of macrophomate. Our results thus provide evidence that a two-step Michael-aldol pathway is a plausible alternative to the postulated [4 + 2] cycloaddition in the MPS-catalyzed addition of pyruvate enolate to 2-pyrones. They are also relevant to understanding the divergent evolution of type II pyruvate aldolases.     

Carbonylation of aryl chlorides with oxygen nucleophiles at atmospheric pressure. Preparation of phenyl esters as acyl transfer agents and the direct preparation of alkyl esters and carboxylic acids

A mild, functional group tolerant method of the preparation of phenyl esters from aryl chlorides via palladium-catalyzed carbonylation is described using atmospheric pressure of carbon monoxide. Phenyl esters are shown to be useful acylating agents, delivering libraries of carbonyl derivatives, including alkyl, allyl and thioesters, under very mild conditions. Direct preparation of alkyl esters and carboxylic acids is also demonstrated, providing the first method for the preparation of methyl and ethyl esters from aryl chlorides without pressured reactors.     

Protein digestion and phosphopeptide enrichment on a glass microchip

This work describes an integrated glass microdevice for proteomics, which directly couples proteolysis with affinity selection. Initial results with standard phosphopeptide fragments from β-casein in peptide mixtures showed selective capture of the phosphorylated fragments using immobilized metal affinity chromatography (IMAC) beads packed into a microchannel. Complete selectivity was seen with angiotensin, with capture of only the phosphorylated form. On-chip proteolysis, using immobilized trypsin beads packed into a separate channel, was directly coupled to the phosphopeptide capture and the integrated devices evaluated using β-casein. Captured and eluted fragments were analyzed using both capillary electrophoresis (CE) and capillary liquid chromatography/mass spectrometry (cLC/MS). The results show selective capture of only phosphopeptide fragments, but incomplete digestion of the protein was apparent from multiple peaks in the CE separations. The MS analysis indicated a capture bias on the IMAC column for the tetraphosphorylated peptide fragment over the monophosphorylated fragment. Application to digestion and capture of a serum fraction showed capture of material; however, non-specific binding was evident. Additional work will be required to fully optimize this system, but this work represents a novel sample preparation method, incorporating protein digestion on-line with affinity capture for proteomic applications.     

Single-ion heat capacities, C(p)(298)ion, of solids: with a novel route to heat-capacity estimation of complex anions

Single-ion heat capacities, C(p)(298)(ion), are additive values for the estimation of room-temperature (298 K) heat capacities of ionic solids. They may be used for inferring the heat capacities of ionic solids for which values are unavailable and for checking reported values, thus complementing our independent method of estimation from formula unit volumes (termed volume-based thermodynamics, VBT). Analysis of the reported heat-capacity data presented here provides a new self-consistent set of heat capacities for both cations and anions that is compatible (and thus may be combined) with an extensive set developed by Spencer. The addition of a large range of silicate species permits the estimation of the heat capacities of many silicate minerals. The single-ion heat capacities of individual silicate anions are observed to be strictly proportional to the total number of atoms (Si plus O), n, contained within the silicate anion complex itself (e.g., for the anion Si(2)O(7)(2-), n = 9, for SiO(4)(2-), n = 5), C(p)(silicate anion)/J K(-1) mol(-1) = 13.8n, in a new rule that is an extension of the Neumann-Kopp relationship. The same linear relationship applies to other homologous anion series (for example, oxygenated heavy-metal anion complexes such as niobates, bismuthates, and tantalates), although with a different proportionality constant. A similar proportionality, C(p)(complex anion)/J K(-1) mol(-1) ≈ 17.5n, which may be regarded as a convenient "rule of thumb", also applies, although less strictly, to complex anions in general. The proportionality constants reflect the rigidity of the complex anion, being always less than the Dulong-Petit value of 25 J K(-1) mol(-1). An emergent feature of our VBT and single-ion approaches to an estimation of the thermodynamic properties is the identification of anomalies in measured values, as is illustrated in this paper.     

Orbitals and the Interpretation of Photoelectron Spectroscopy and (e,2e) Ionization Experiments

Electron momentum spectroscopy, scanning tunneling microscopy, and photoelectron spectroscopy provide unique information about electronic structure, but their interpretation has been controversial. This essay discusses a framework for interpretation. Although this interpretation is not new, we believe it is important to present this framework in light of recent publications. The key point is that these experiments provide information about how the electron distribution changes upon ionization, not how electrons behave in the pre‐ionized state. Therefore, these experiments do not lead to a “selection of the correct orbitals” in chemistry and do not overturn the well‐known conclusion that both delocalized molecular orbitals and localized molecular orbitals are useful for interpreting chemical structure and dynamics. The two types of orbitals can produce identical total molecular electron densities and therefore molecular properties. Different types of orbitals are useful for different purposes.