An unprecedented switching of the second-order nonlinear optical response in aggregate bis(salicylaldiminato)zinc(II) Schiff-base complexes

A luminescent bis(salicylaldiminato)zinc(II) Schiff-base complex, 1, is characterized by a concentration dependent second-order nonlinear optical response, related to the degree of aggregation of the complex in a dichloromethane solution. The formation of the monomeric adduct, by addition of a Lewis base, such as pyridine, to concentrated solutions of 1, leads to a switch-on of the quadratic hyperpolarizability. This represents an unprecedented mode of NLO switching in molecular materials.     

Plate coating: influence of concentrated surfactants on the film thickness

We present a large range of experimental data concerning the influence of surfactants on the well-known Landau-Levich-Derjaguin experiment where a liquid film is generated by pulling a plate out of a bath. The thickness h of the film was measured as a function of the pulling velocity V for different kinds of surfactants (C(12)E(6), which is a nonionic surfactant, and DeTAB and DTAB, which are ionic) and at various concentrations near and above the critical micellar concentration (cmc). We report the thickening factor α = h/h(LLD), where h(LLD) is the film thickness obtained without a surfactant effect, i.e., as for a pure fluid but with the same viscosity and surface tension as the surfactant solution, over a wide range of capillary numbers (Ca = ηV/γ, with η being the surfactant solution viscosity and γ its surface tension) and identify three regimes: (i) at small Ca α is large due to confinement and surface elasticity (or Marangoni) effects, (ii) for increasing Ca there is an intermediate regime where α decreases as Ca increases, and (iii) at larger (but still small) Ca α is slightly higher than unity due to surface viscosity effects. In the case of nonionic surfactants, the second regime begins at a fixed Ca, independent of the surfactant concentration, while for ionic surfactants the transition depends on the concentration, which we suggest is probably due to the existence of an electrostatic barrier to surface adsorption. Control of the physical chemistry at the interface allowed us to elucidate the nature of the three regimes in terms of surface rheological properties.     

Reversible Control over Molecular Recognition in Surface‐Bound Photoswitchable Hydrogen‐Bonding Receptors: Towards Read–Write–Erase Molecular Printboards

The synthesis of an anthracene‐bearing photoactive barbituric acid receptor and its subsequent grafting onto azide‐terminated alkanethiol/Au self‐assembled monolayers by using an Cu^I‐catalyzed azide–alkyne reaction is reported. Monolayer characterization using contact‐angle measurements, electrochemistry, and spectroscopic ellipsometry indicate that the monolayer conversion is fast and complete. Irradiation of the receptor leads to photodimerization of the anthracenes, which induces the open‐to‐closed gating of the receptor by blocking access to the binding site. The process is thermally reversible, and polarization‐modulated IR reflection–absorption spectroscopy indicates that photochemical closure and thermal opening of the surface‐bound receptors occur in 70 and 100 % conversion, respectively. Affinity of the open and closed surface‐bound receptor was characterized by using force spectroscopy with a barbituric‐acid‐modified atomic force microscope tip.     

Synthesis of a New C-15 Phosphorus Ylide Used for the Preparation of Some β-End-Group Retinoid Derivatives

A synthesis of a new C-15 phosphorus ylide from a C-14 enaminone is reported. This reagent, which undergoes selective 1,2- or 1,4-additions with saturated and unsaturated aldehydes, may find some synthetic use for the preparation of β-end-group retinoid derivatives.     

Stereoselective Cycloaddition of Monosubstituted Ketene to a Methyl Glyoxylate- and Threonine-Derived Imine: Synthesis of Optically Pure β-Lactamic α-Amino Ester with High Functionality

The reaction of chloroacetyl chloride and triethylamine with a chiral imine derived from the combination of methyl glyoxylate and protected L-threonine gave two optically active α-amino acid derivatives with a cis-substituted β-lactam skeleton in a 72:28 ratio. The major product is obtained in 59% yield by simple crystallisation.     

A Convenient Large Scale Synthesis of 1, 1-Diphenyl-1 -silacyclopent-3-ene

An efficient one-step synthesis of 1,1-dipfienyl-1-silacyclopent-3-ene 1 is reported.     

Efficient Access to Peptidyl‐RNA Conjugates for Picomolar Inhibition of Non‐ribosomal FemXWv Aminoacyl Transferase

Peptidyl–RNA conjugates have various applications in studying the ribosome and enzymes participating in tRNA‐dependent pathways such as Fem transferases in peptidoglycan synthesis. Herein a convergent synthesis of peptidyl–RNAs based on Huisgen–Sharpless cycloaddition for the final ligation step is developed. Azides and alkynes are introduced into tRNA and UDP‐MurNAc‐pentapeptide, respectively. Synthesis of 2′‐azido RNA helix starts from 2′‐azido‐2′‐deoxyadenosine that is coupled to deoxycytidine by phosphoramidite chemistry. The resulting dinucleotide is deprotected and ligated to a 22‐nt RNA helix mimicking the acceptor arm of Ala‐tRNA^Ala by T4 RNA ligase. For alkyne UDP‐MurNAc‐pentapeptide, meso‐cystine is enzymatically incorporated into the peptidoglycan precursor and reduced, and L ‐Cys is converted to dehydroalanine with O‐(mesitylenesulfonyl)hydroxylamine. Reaction of but‐3‐yne‐1‐thiol with dehydroalanine affords the alkyne‐containing UDP‐MurNAc‐pentapeptide. The Cu^I‐catalyzed azide alkyne cycloaddition reaction in the presence of tris[(1‐hydroxypropyl‐1H‐1,2,3‐triazol‐4‐yl)methyl]amine provided the peptidyl‐RNA conjugate, which was tested as an inhibitor of non‐ribosomal FemX_Wv aminoacyl transferase. The bi‐substrate analogue was found to inhibit FemX_Wv with an IC₅₀ of (89±9) pM , as both moieties of the peptidyl–RNA conjugate contribute to high‐affinity binding.     

Syntheses of d-Glucosaminyl Bolaamphiphiles1

Abstract

Twelve N-acetyl or NH2-free D-glucosaminyl bolaamphiphiles have been synthesized by the intermediate of N-allyloxycarbonyl-d-glucosaminyl precursors. Thus, glycosylation of α,ω-diols with 1,3,4,6-tetra-O-acetyl-2-allyloxycarbonylamino-2-deoxy-β-d-glucopyranose (1) gave the bis(glycosides) 2a-h in good yields and without column chromatography. Alkaline treatment of these derivatives followed by acetylation gave the peracetylated N-acetyl compounds 3a-h which were further deprotected by the Zemplén deacetylation procedure to the N-acetyl-d-glucosaminyl bolaamphiphiles 4a-h. The bis(glycosides) 2c,d,g were also transformed into the O-acetylated amino-free derivatives 5c,d,g by chemospecific deprotection of the N-allyloxycarbonyl groups with palladium (0). Further deprotection of the ester functions led to the completely deprotected bolaamphiphiles 7c,d,g with high yields. Fully deprotected compounds 7a,d,g,h were also obtained from 2a,d,g,h by alkaline treatment and purification by column chromatography. Surface tension measurements were realized for aqueous solutions containing the soluble bolaamphiphiles.     

Atypical Oxidation Reaction by Thionyl Chloride: Easy Two‐Step Synthesis of N‐Alkyl‐1,4‐dithiines

Easy two‐step synthesis of a series of dithiines was performed from succinic anhydride via cyclization of the corresponding 4‐(alkylamino)‐4‐oxobutanoic acids (succinamic acids). The reaction, carried out in polar aprotic solvents, gave 4,8‐dithiine‐indacene‐1,3,5,7‐tetraones (diimides 3) via 3,7‐bis‐4,8‐dithia‐indacene‐1,5‐diones (diisoimides 2), which could be isolated. Surprisingly, in this reaction, thionyl chloride appeared as an oxidant, and this process seemed to be useful for the syntheses of S‐containing heterocyclic compounds such as 1,4‐dithiins. A mechanistic pathway was considered.     

Improved Asymmetric Synthesis of 8-Arylmenthols

A two-step synthesis of a set of arylmenthones 3 from R(+)-pulegone 2 via their silylenolethers 4 is proposed leading in high yields to 8-arylmenthols 1.