The kinetics of methane ignition in fuel-rich HCCI engines: DME replacement by ozone

Fuel-rich combustion of methane in a homogeneous-charge compression-ignition (HCCI) engine can be used as a polygeneration process producing work, heat, and useful chemicals like syngas. Due to the inertness of methane, additives such as dimethyl ether (DME) are needed to achieve ignition at moderate inlet temperatures and to control combustion phasing. Because significant concentrations of DME are then needed, a considerable part of the fuel energy comes from DME. An alternative ignition promotor known from fuel-lean HCCI is ozone (O₃). Here, a combined experimental and modelling study on the ignition of fuel-rich partial oxidation of methane/air mixtures at Φ = 1.9 with ozone and DME as additives in an HCCI engine is conducted. Experimental results show that ozone is a suitable additive for fuel-rich HCCI, with only 75 ppm ozone reducing the fuel-fraction of DME needed from 11.0% to 5.3%. Since ozone does not survive until the end of the compression stroke, the reaction paths are analyzed in a single-zone model. The simulation shows that different ignition precursors or buffer molecules are formed, depending on the additives. If only DME is added, hydrogen peroxide (H₂O₂) and formaldehyde (CH₂O) are the most important intermediates, leading to OH formation and ignition around top dead center (TDC). With ozone addition, methyl hydroperoxide (CH₃OOH) becomes very important earlier in the compression stroke under these fuel-rich conditions. It is then later converted to CH₂O and H₂O₂. Thus, ozone is a very effective additive not only for fuel-lean, but also for fuel-rich combustion. However, the mechanism differs between both regimes. Because less of the expensive additives are needed, ozone could help improving the economics of a polygeneration process with fuel-rich operated HCCI engines.     

Femtosecond holography in lithium niobate crystals

Spatial gratings are recorded holographically by two femtosecond pump pulses at 388 nm in lithium niobate (LiNbO3) crystals and read out by a Bragg-matched, temporally delayed probe pulse at 776 nm. We claim, to our knowledge, the first holographic pump-probe experiments with subpicosecond temporal resolution for LiNbO3. An instantaneous grating that is due mostly to the Kerr effect as well as a long-lasting grating that results mainly from the absorption caused by photoexcited carriers was observed. The Kerr coefficient of LiNbO3 for our experimental conditions, i.e., pumped and probed at different wavelengths, was approximately 1.0 x 10(-5) cm2/GW.     

Electronic structure and elasticity of Z-phases in the Cr-Nb-V-N system

Structural properties and energetics of Cr-based Z-phases (CrNbN, Cr(Nb,V)N and CrVN) were investigated using the Vienna ab?initio simulation package (VASP) code employing the projector augmented wave (PAW) pseudopotentials by means of both local density approximation (LDA) and generalized gradient approximation (GGA) for the exchange and correlation term. The geometry of all studied phases including NbN, VN and elemental constituents (nonmagnetic bcc Nb and V and antiferromagnetic bcc Cr) was fully relaxed, providing the equilibrium structure parameters and total energies. The calculated lattice parameters of Z-phases correspond very well to the experimental data and decrease with increasing molar fraction of vanadium. Enthalpies of formation show that all three Z-phases are stable at T?=?0?K. The electronic structures of Z-phases including densities of states and charge densities were analysed. The calculated bulk moduli and elastic constants were used to evaluate stability conditions and elastic anisotropy ratios. It was confirmed that Z-phases are mechanically stable. Additional information on ductility was obtained from Cauchy pressures, Pugh ratios, Young moduli, and Poisson ratios. The ductility evaluated using the Pugh ratio decreases with number of vanadium atoms.     

Energy distribution curves of ultrafast laser-induced field emission and their implications for electron dynamics

Energy distribution curves of laser-induced electron pulses from a tungsten tip have been measured as a function of tip voltage and laser power. Electron emission via tunneling through and/or excitation over the surface barrier from photoexcited nonequilibrium electron distributions are clearly observed. The spectral shapes largely vary with the emission processes and are strongly affected by electron dynamics. Simulations successfully reproduce the spectra, thus allowing direct insight into the involved electron dynamics and revealing the temporal tunability of electron emission via the two experimental parameters. These results should be useful to optimize the pulse characteristics for many applications based on ultrafast laser-induced electron emission.     

Topological properties of stock market networks: The case of Brazil

This paper investigates the topological properties of the Brazilian stock market networks. We build the minimum spanning tree, which is based on the concept of ultrametricity, using the correlation matrix for a variety of stocks of different sectors. Our results suggest that stocks tend to cluster by sector. We employ a dynamic approach using complex network measures and find that the relative importance of different sectors within the network varies. The financial, energy and material sectors are the most important within the network.     

Influence of using nanoobjects as filler on functionality-based energy use of nanocomposites

The goal of our study was to investigate the potential benefits of reinforcing polymer matrices with nanoobjects for structural applications by looking at both the mechanical properties and environmental impacts. For determining the mechanical properties, we applied the material indices defined by Ashby for stiffness and strength. For the calculation of environmental impacts, we applied the life cycle assessment methodology, focusing on non-renewable energy use (NREU). NREU has shown to be a good indicator also for other environmental impacts. We then divided the NREU by the appropriate Ashby index to obtain the ‘functionality-based NREU’. We studied 23 different nanocomposites, based on thermoplastic and thermosetting polymer matrices and organophilic montmorillonite, silica, carbon nanotubes (single-walled and multiwalled) and calcium carbonate as filler. For 17 of these, we saw a decrease of the functionality-based NREU with increasing filler content. We draw the conclusion that the use of nanoobjects as filler can have benefits from both an environmental point of view and with respect to mechanical properties.     

On the Photophysical Properties of New Luminol Derivatives and their Synthetic Phthalimide Precursors

The photophysical properties of a series of structurally related 4-aminophthalimides and the corresponding 5-aminophthalic hydrazides (luminols) are reported. Absorption, steady-state, and time-resolved fluorescence spectra of luminols exhibited substitution, solvent, and pH dependence. Singlet lifetimes have been determined by time-resolved laser flash spectroscopy. UV spectra in gas phase and DMSO solution were calculated by TD-DFT which revealed the existence of two low-energy excited singlet states with strong pH-sensitivity.     

Absorption of short laser pulses on solid targets in the ultrarelativistic regime

We report the first direct measurements of total absorption of short laser pulses on solid targets in the ultrarelativistic regime. The data show an enhanced absorption at intensities above 10(20) W/cm(2), reaching 60% for near-normal incidence and 80%-90% for 45 degrees incidence. Two-dimensional particle-in-cell simulations demonstrate that such high absorption is consistent with both interaction with preplasma and hole boring by the intense laser pulse. A large redshift in the second harmonic indicates a surface recession velocity of 0.035c.