The glucocorticoid derivative with the phthalimide group cationic nanocrystal for ophthalmic application: a design space development approach

The glucocorticoid derivative of budesonide with a phthalimide group is a drug candidate to treat inflammatory eye diseases; nevertheless, it presents low water solubility. Drug nanocrystals have been proposed to overcome this hurdle. The development of an innovative ophthalmic anti-inflammatory nanosuspension was performed using a design space approach. We obtained the particle size reduction of this glucocorticoid derivative on a nanometer scale (approximately 165.0 nm), applying wet bead milling on a super reduced scale. The design of experiment supported the optimization of the formula evaluating the parameters that influence reducing the particle size and also allowed determining the design space. Considering the two statistical models developed and the size range obtained, we proposed that the optimized formulation for the glucocorticoid derivative nanosuspension may be 1.0 wt% glucocorticoid derivative and 0.092 wt% cetylpyridinium chloride. This formulation was characterized by the morphological, physical–chemical, and mucoadhesive in vitro test and showed potential for ophthalmic use with reduced frequency of product application, improved efficiency, and safety, which may promote better patient compliance.     

Multi‐responses Methodology Applied in the Electroanalytical Determination of Hair Dye by Using Printed Carbon Electrode Modified with Graphene

This paper describes a rapid and sensitive method for determination of the hair dye Basic Blue 41 in wastewater samples using screen‐printed carbon electrodes modified with graphene (SPCE/Gr). The method is based on the reversible reduction of azo groups of the dye at potential of ?0.23 V/?0.26 V, where both the anodic and cathodic currents increased 1,300 % when compared to screen‐printed carbon (SPCE) and glassy carbon electrodes (GCE). The optimization of a square wave voltammetric method was performed by means of 2³ factorial design, Doehlert matrix and multi‐response assays, and the best parameters were: frequency (54.8 Hz), step potential (6 mV), pulse amplitude (43.7 mV) and pH 4.5. The analytical curve was constructed from 3.00×10^?8 to 2.01×10^?6 mol L^?1, with detection and quantification limits of 5.00×10^?9 and 1.70×10^?8 mol L^?1, respectively. The repeatability of the method evaluated for 10 consecutive measurements at concentrations of 1.70×10^?7 mol L^?1 and 1.70×10^?6 mol L^?1, showed relative standard deviation of 3.56 and 0.57 %, respectively. The sensor based in SPCE/Gr was successfully applied in wastewater samples collected from a drinking water treatment plant and validated by comparison with HPLC‐DAD method with good accuracy.     

Determination of bisphenol A and bisphenol B in canned seafood combining QuEChERS extraction with dispersive liquid–liquid microextraction followed by gas chromatography–mass spectrometry

A new simple and reliable method combining an acetonitrile partitioning extractive procedure followed by dispersive solid-phase cleanup (QuEChERS) with dispersive liquid–liquid microextraction (DLLME) and further gas chromatography mass spectrometry analysis was developed for the simultaneous determination of bisphenol A (BPA) and bisphenol B (BPB) in canned seafood samples. Besides the great enrichment factor provided, the final DLLME extractive step was designed in order to allow the simultaneous acetylation of the compounds required for their gas chromatographic analysis. Tetrachloroethylene was used as extractive solvent, while the acetonitrile extract obtained from QuEChERS was used as dispersive solvent, and anhydride acetic as derivatizing reagent. The main factors influencing QuEChERS and DLLME efficiency including nature of QuEChERS dispersive-SPE sorbents, amount of DLLME extractive and dispersive solvents and nature and amount of derivatizing reagent were evaluated. DLLME procedure provides an effective enrichment of the extract, allowing the required sensitivity even using a single quadropole MS as detector. The optimized method showed to be accurate (>68?% recovery), reproducible (<21?% relative standard deviation) and sensitive for the target analytes (method detection limits of 0.2?μg/kg for BPA and 0.4?μg/kg for BPB). The screening of several canned seafood samples commercialized in Portugal (total?=?47) revealed the presence of BPA in more than 83?% of the samples with levels ranging from 1.0 to 99.9?μg/kg, while BPB was found in only one sample at a level of 21.8?μg/kg.     

Evaluation of the antiviral and antimicrobial activities of triterpenes isolated from Euphorbia segetalis

A phytochemical reinvestigation of the whole plant of Euphorbia segetalis yielded five tetracyclic triterpenes: 3beta-hydroxy-cycloart-25-en-24-one (1), cycloart-25-ene-3beta,24-diol (2), cycloart-23-ene-3beta,25-diol (3), lanosta-7,9(11),24-trien-3beta-ol (4) and lanosta-7,9(11),24(31)-trien-3beta-ol (5). beta-acetoxy-cycloart-25-en-24-one (1a) and glutinol (6), lupenone (7), dammaranodienol (9), cycloartenol acetate (10), 24-methylenecycloartanol acetate (11) and beta-sitosterol (12), isolated previously, were evaluated for their antiviral activities against Herpes simplex virus (HSV) and African swine fever virus (ASFV). Lupenone exhibited strong viral plaque inhibitory effect against HSV-1 and HSV-2. The in vitro antifungal and antibacterial activities of la, cycloart-23-ene-3beta,25-diol, 3-acetate (3a) and 6-12 were also investigated.     

Effects of diclofenac on EPC liposome membrane properties

In this work the interaction of a non-steroidal anti-inflammatory drug (NSAID), diclofenac, with egg yolk phosphatidylcoline (EPC) liposomes, used as cell-membrane models, was quantified by determination of the partition coefficient. The liposome/aqueous phase partition coefficient was determined by derivative spectrophotometry, fluorescence quenching, and measurement of zeta-potential. Theoretical models based on simple partition of the diclofenac between two different media, were used to fit the experimental data, enabling the determination of K_p. The three techniques used yielded similar results. The effects of the interaction on the membranes characteristics were further evaluated, either by studying membrane potential changes or by effects on membrane fluidity. The liposome membrane potential and the size and size-homogeneity of liposomes were measured by light scattering. The effects of diclofenac on the internal viscosity or fluidity of the membrane were determined by use of spectroscopic probes—a series of n-(9-anthroyloxy) fatty acids in which the carboxyl terminal group is located at the interfacial region of the membrane and the fluorescent anthracene group is attached at different positions along the fatty acid chain. The location of the diclofenac on the membrane was also evaluated, by fluorescence quenching using the same series of fluorescent probes. Because the fluorescent anthracene group is attached at different positions along the fatty acid chain, it is possible to label at a graded series of depths in the bilayer. The interactions between the drug and the probe are a means of predicting the location of the drug on the membrane.     

Phenolic Compound Profile by UPLC-MS/MS and Encapsulation with Chitosan of Spondias mombin L. Fruit Peel Extract from Cerrado Hotspot—Brazil

Taperebá (Spondias mombin L.) is a native species of the Brazilian Cerrado that has shown important characteristics such as a significant phenolic compound content and biological activities. The present study aimed to characterize the phenolic compound profile and antioxidant activity in taperebá peel extract, as well as microencapsulating the extract with chitosan and evaluating the stability of the microparticles. The evaluation of the profile of phenolic compounds was carried out by UPLC-MS/MS. The in vitro antioxidant activity was evaluated by DPPH and ABTS methods. The microparticles were obtained by spray drying and were submitted to a stability study under different temperatures. In general, the results showed a significant content of polyphenols and antioxidant activity. The results of UPLC-MS/MS demonstrated a significant content of polyphenols in taperebá peel, highlighting the high content of ellagic acid and quercetin compounds. There was significant retention of phenolic compounds when microencapsulated, demonstrating high retention at all evaluated temperatures. This study is the first to microencapsulate the extract of taperebá peel, in addition to identifying and quantifying some compounds in this fruit.     

Optical studies of ZnO nanocrystals doped with Eu3+ ions

Synthetic ZnO nanocrystals have been intentionally doped with Eu³⁺ ions. Structural analysis performed on the nanocrystals showed wurtzite-ZnO as the only phase present in the samples. Photoluminescence in emission and excitation modes allows the assignment of the intra-4f⁶ transitions for the Eu³⁺ ions. From the analysis of the optical data we are able to demonstrate that multiple Eu-related optical centres are present in the studied samples. Oxygen vacancies are likely candidates to be responsible for the ion accommodation in the ZnO lattice and from the photoluminescence excitation data we tentatively assign a trap level at ∼200 meV below the conduction band to this intrinsic defect. PACS 78.66.Hf; 78.67.-n; 82.80.Yc     

Nanostructures of sodium titanate/zirconium oxide

In this work is reported the synthesis of nanotubes and nanoribbons from mixed oxides (Ti_1−x Zr _x O₂·nH₂O), employing hydrothermal treatment in a highly alkaline medium. The morphology and crystal structure of the products obtained via hydrothermal treatment depend on the value of x. For example, for x equal to 0 and 0.50 were observed the presence of nanotubes (diameter around 9 nm) and nanoribbons (diameter around 200 nm), respectively. However, for x values above 0.50, there was no morphological change. Regarding the crystalline structure of these samples, for x equal to 0 was observed the sodium titanate phase; already for x values up to 0.50, we observed the presence of two crystalline phases: sodium titanate and tetragonal ZrO₂. For x values above 0.50, only tetragonal ZrO₂ was observed. Furthermore, only the product obtained from x equal to 0.15 was observed the presence of three-dimensional flower-like arrangements. The results obtained by the characterization techniques showed the segregation of zirconium after hydrothermal treatment of precursors with x less or equal to 0.50. Thus, we describe the important role that Ti/Zr molar ratio of the precursor plays on the morphology and crystalline phase of the products formed by hydrothermal treatment.     

Local variation of the dielectric properties of poly(vinylidene fluoride) during the α- to β-phase transformation

The phase transformation from the non-polar α-phase to the polar electroactive β-phase of polyvinylidene fluoride (PVDF) has been investigated using the fluorescence from Nile red. Films of α-PVDF doped with Nile red were stretched at controlled rates at a temperature of 80 °C to produce the α- to β-phase transition. The thermo/mechanical dependent changes in the crystalline structure are related to the physical rotation of the polar (CH₂-CF₂) group, which can be monitored by steady state fluorescence techniques. The degree of phase transformation is related to variation in the fluorescence, which in turn is linked to local dielectric constant of the polymer. The variation of the refractive index is more associated to the alignment of the polymeric chains than to the phase transformation. Thus, fluorescence is a suitable technique to monitor phase transitions coupled to a variation in the polarity of the dielectric medium.     

A soft origin for CKM-type CP violation

We present a two-Higgs-doublet model, with a Z₃ symmetry, in which CP violation originates solely in a soft (dimension-2) coupling in the scalar potential, and reveals itself solely in the CKM (quark mixing) matrix. In particular, in the mass basis the Yukawa interactions of the neutral scalars are all real. The model has only eleven parameters to fit the six quark masses and the four independent CKM-matrix observables. We find regions of parameter space in which the flavour-changing neutral couplings are so suppressed that they allow the scalars to be no heavier than a few hundred GeV.