A theoretical and experimental study of the fluxional behaviour of molybdenum dihydrobis- and hydrotris-pyrazolylborates

The fluxional barrier of (dicarbonyl)[dihydrobis(3,5-dimethylpyrazol-1-yl)borato][eta-(1,2,3)-2-methylpropen-1-yl]-molybdenum (1) has been measured and a complete assignment of its (1)H, (13)C and (15)N NMR signals has been carried out. Theoretical calculations at the B3LYP/LANL2DZ level including GIAO absolute shieldings (sigma) have allowed to analyze the molecular contributions to the barrier as well as to assign some signals involved in the fluxional process.     

Synthesis, crystal structure, aqueous speciation, and kinetics of substitution reactions in a water-soluble Mo3S4 cluster bearing hydroxymethyl diphosphine ligands

The [Mo3S4Cl3(dhmpe)3]Cl ([1]Cl) cluster has been prepared from [Mo3S7Cl6]2- and the water-soluble 1,2-bis(bis(hydroxymethyl)-phosphino)ethane (dhmpe, L) ligand. The crystal structure has been determined by X-ray diffraction methods and shows the incomplete cuboidal structure typical of the M3Q4 clusters (M=Mo, W; Q=S, Se), with a capping sulfide ligand to the three metal centers and the other three sulfides acting as bridges between two Mo atoms. The octahedral coordination around each metal center is completed with a chlorine and two phosphorus atoms of one L ligand. The chemistry of aqueous solutions of [1]Cl is dominated by the formation of the [Mo3S4L(L-H)2(H2O)]2+ complex ([2]2+), where the three chlorides have been replaced by one water molecule and two alkoxo groups of two different dhmpe ligands, thus leading to a solution structure where the three metal centers are not equivalent. A detailed study based on stopped-flow, 31P{1H} NMR, and electrospray ionization mass spectrometry techniques has been carried out to understand the behavior of [2]2+ in aqueous solution. In this way, it has been established that the addition of an excess of X- (Cl-, SCN-) leads to [Mo3S4X3(dhmpe)3]+ complexes in three resolved kinetic steps that correspond to the sequential coordination of X- at the three metal centers. However, whereas the first two steps involve the opening of the chelate rings formed with the alkoxo groups of the dhmpe ligands, the third one corresponds to the substitution of the coordinated water molecule. These results demonstrate that the asymmetry introduced by the closure of chelate rings at only two of the three Mo centers makes the kinetics of the reaction deviate significantly from the statistical behavior typically associated with M3Q4 clusters. The results obtained for the reaction of [2]2+ with acid and base are also described, and they complete the picture of the aqueous speciation of this cluster.     

Kinetic wavelength-pair method as an alternative approach to simultaneous multi-component analysis

The kinetic wavelength-pair method involves adapting a well established principle to the simultaneous kinetic-based determination of two or more compounds with diode-array detection. It relies on measuring the difference in the rate of change of the absorbance with time at two preset wavelength pairs such that the values of these measuring parameters are the result of the contribution of one or two components. The theoretical basis adapted to first-order kinetic-based determinations was established and checked on four systems. The method thus developed was compared with other differential kinetic methods and applied to the resolution of formaldehyde-acrolein mixtures.     

Determination of non-ionic polyethoxylated surfactants in wastewater and river water by mixed hemimicelle extraction and liquid chromatography-ion trap mass spectrometry

The capability of hemimicelles-based solid phase extraction (SPE)/liquid chromatography/atmospheric pressure chemical ionisation in positive mode, ion trap mass spectrometry (LC/(APCl+-IT)-MS) for the concentration, separation and quantitation of non-ionic surfactants has been investigated. Concentration was based on the formation of mixed aggregates of analytes [alkylphenol ethoxylates (APE, octyl and nonyl) and alkyl ethoxylates (AE, C12-C16)] with the anionic surfactant sodium dodecyl sulphate (SDS) that is adsorbed on alumina. Parameters affecting SPE were investigated on the basis that hemimicelles are dynamic entities in equilibrium with the aqueous phase. The performance of ion trap mass spectrometry for MS and MS/MS quantitation of non-ionic homologues was assessed. Recoveries of analytes from wastewater influent and effluent and river water samples ranged between 91 and 98% and were found independent on the length of the alkyl chain under the optimised conditions. Anionic surfactants did not interfere to the levels found in environmental samples. The detection limits ranged between 14 and 111 ng/l for wastewater influent, 10 and 40 for wastewater effluent and 4 and 35 for river water, after concentration of 250, 500 and 750 ml of sample, respectively. The approach was applied to the determination of AE and APE in influent and effluent samples from four wastewater treatment plants and four river samples. The concentrations of individual non-ionic surfactants found ranged between 0.3 and 373 microg/l.     

SPME-GC-MS analysis of commercial henna samples (Lawsonia inermis L.)

The aim of this work was to provide a characterisation of volatile constituents from different commercial batches of henna (Lawsonia inermis) leaves of different geographic origin. Headspace solid-phase microextraction (HS-SPME) coupled with gas chromatography–mass spectrometry (GC–MS) was used for the purpose. A total of 72 components were identified by GC–MS in the headspace of different henna samples which proved to differ considerably from each other, because they were characterised by different classes of components, mainly aliphatic compounds (9.0–64.7%), terpenoids (5.8–45.5%) and aromatics (7.9–45.2%), with alkanes (0.9–18.5%), aldehydes (2.1–18.8%) and carboxylic acids (3.1–29.3%), monoterpenes (3.4–30.0%) and sesquiterpenes (0.8–23.7%) and phenyl propanoids (0.6–43.1%), being the most abundant, respectively. Major representatives of these groups were n-hexadecane (0.5–4.7%), (2E)-hexenal (0.5–11.7%) and acetic acid (2.8–24.5%), limonene (0.8–14.7%), carvol (3.8–7.1%), geranyl acetone (1.4–7.9%) and (E)-caryophyllene (3.3–8.4%), and (E)-anethole (0.6–35.0%), respectively. We assume that factors such as the manufacturing process, the storage conditions and the different geographic origin of the samples may contribute to such variability.     

Palladium-catalyzed [2 + 2 + 2] cycloadditions of 3,4-didehydrophenanthrene and 1,2-didehydrotriphenylene

Palladium-catalyzed [2 + 2 + 2] cycloaddition reactions of 3,4-didehydrophenanthrene (3,4-phenanthryne) and 1,2-didehydrotriphenylene (1,2-triphenylyne) afford sterically congested polycyclic aromatic hydrocarbons with novel structures.     

A sensitive post-column photochemical derivatization/fluorimetric detection system for HPLC determination of bisphosphonates

A new reversed-phase ion-pair high-performance liquid chromatographic (HPLC) method has been developed for the determination of the following bisphosphonic acids: alendronic acid (ALEN), etidronic acid (ETID), ibandronic acid (IBAN) and risedronic acid (RISE). Separation was achieved on a C₁₈ column using a mixture of 50 mmol L⁻¹ borate buffer pH 9.0 containing 0.25 mmol L⁻¹ tetrabutylammonium chloride and 0.5 mmol L⁻¹ EDTA and acetonitrile (97:3) as the mobile phase. The sensitive detection of the above bisphosphonic acids was based on their oxidation to orthophosphate by the on-line peroxydisulfate-assisted photolysis followed by post-column reaction with molybdate to yield phosphomolybdate. This subsequently reacted with thiamine to generate thiochrome and, finally, the fluorescence of thiochrome was measured at 440 nm with excitation at 375 nm. The developed method is precise with a mean relative standard deviation of 1.3%, sensitive (with a detection limit at the nmol L⁻¹ level), accurate, specific, rapid (analysis time approximately 13 min) and inexpensive because to the low cost of the reagents. The assay was applied to the analysis of the four bisphosphonic acids in commercial dosage formulations, in which the excipients did not interfere with the determination. The method was also applied to the determination of etidronate, risedronate and ibandronate in human urine. Sample preparation involves precipitation of the analytes from urine along with endogenous phosphates such as calcium salts by addition of calcium chloride at alkaline pH and dissolution of the precipitate in 0.05 mol L⁻¹ ethylene glycol-bis(β-aminoethyl ether)-N,N,N′,N′-tetraacetic acid.     

Assessment of the surfactant-dye binding degree method as an alternative to the methylene blue method for the determination of anionic surfactants in aqueous environmental samples

The surfactant to dye binding degree (SDBD) method is proposed for the routine monitoring of anionic surfactants in aqueous environmental samples and their analytical features compared with those provided by the standard methylene blue (MB) method. This new analytical approach is based on the effect that anionic surfactants exert on the binding degree of the cationic surfactant didodecyldimethylammonium bromide (DDABr) to the anionic dye Coomassie Brilliant Blue G (CBBG). The formation of DDABr-CBBG aggregates is monitored photometrically. The analytical applicability of the proposed method was demonstrated by determining anionic surfactants in tap, river and swamp water, and raw and treated sewage. The mean recoveries obtained ranged between 99 and 101%. The SDBD method offers important advantages over the classical MB method: it is more sensitive, selective, precise, simple and rapid; the analytical response is independent of the molecular structure of the anionic surfactants, and the volume of sample required for analysis and the consumption of organic solvents are significantly reduced.     

Organocatalytic enantioselective synthesis of highly functionalized polysubstituted pyrrolidines

The organocatalytic conjugate addition of different aldehydes to beta-nitroacrolein dimethyl acetal, generating the corresponding highly functionalized nitroaldehydes in high yields and with high stereoselectivities, has been studied in detail. These transformations have been achieved by using both readily available starting materials in a 1:1 ratio as well as commercially available catalysts at a 10 mol % catalyst loading. Furthermore, a very short and efficient protocol has been devised for the preparation of highly enantioenriched pyrrolidines containing two or three contiguous stereocenters starting from the obtained Michael adducts. 3,4-Disubstituted pyrrolidines have been obtained in a single step by Zn-mediated chemoselective reduction of the nitro group followed by intramolecular reductive amination, and trisubstituted homoproline derivatives have been prepared by means of an olefination reaction and a cascade process involving chemoselective reduction of the nitro group followed by a fully diastereoselective intramolecular aza- Michael reaction.