纳米TiO2膜用于光催化氧化测定化学需氧量的研究

A photocatalytic oxidation method for determination of chemical oxygen demand （COD） using nano-TiO2 film, based on the use of a nano-TiO2-Ce（SO4）2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce（Ⅲ） concentration change resulting from photocatalytic oxidation of organic compounds. Ce（Ⅲ）, which was produced by photocatalytic reduction of Ce（SO4）2, could be measured at a multi-walled carbon nanotubes （MWNT） chemically modified electrode （CME）. The COD values by this method were calculated from the differential pulse voltammetry （DPV） current of Ce（Ⅲ） at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.     

含两种不同介晶基团的半刚性共聚酯液晶态的结构研究

用Ｘ－光衍射，偏光显微镜及ＤＳＣ对含两种不同长度介晶基团４，４’－联苯二酚（Ⅰ）和对苯二甲酸二（对羟苯基）酯（Ⅱ）的系列共聚酯的液晶态进行了表征，据其液晶态中两种介晶单元的堆砌方式提出了可能的模型，这种模型很好地解释了液晶态的Ｘ－光衍射分布．     

亚临床肝性脑病患者的血清锌,铜含量的测定及临床意义

检测了３０例慢性活动性肝炎患者、３０例肝硬化患者、３０例亚临床肝性脑病患者血清中的铜、锌含量，并与正常对照组进行比较分析，探讨了微量元素铜、锌的血清含量改变及其影响因素，分析其临床意义。结果表明体内的铜锌含量与肝脏功能有密切的关系。在慢性活动性肝炎时，虽然肝脏功能有一定的损害，但由于肝脏的代偿能力强，铜，锌含量仍可保持在正常水平，而在肝硬化、亚临床肝性脑病时，铜锌明显降低，而铜锌含量的降低又导致机     

实验室废液的回收及效果评价——以“铬废液回收及评价”为例

This paper introduces an experiment about waste liquid recovery and effect evaluation in laboratory. Through this experiment, the basic operations of crystal preparation, chemical analysis and instrumental analysis are further consolidated. At the same time, it allows students to experience a series of possible problems of condition selection and control in the process of waste liquid treatment. We hope to improve the students' ability to analyze and solve problems, enhance their interest in learning, and strengthen their humanistic education.     

安培检测芯片毛细管电泳及其初步应用

An end-channel amperometric detector with a guide tube for working electrode was designed and integrated on a home-made glass microchip. The guide tube was directly patterned and fabricated at the end of the detection reservoir, which made the fixation and alignment of working electrode relatively easy. The fabrication was carried out in a two-step etching process. A 30 μm carbon fiber microdisk electrode and Pt cathode were also integrated onto the amperometric detector. The baseline separation of dopamine (DA), catechol (CA) and epinephrine (EP) was achieved within 80 s. Relative standard deviations of not more than 5.2% were obtained for both peak currents and migration times of DA and CA (n=5). Using standard adding method, DA in tLrine and plasma samples was detected. The recoveries were in the range of 83%—103%.     

Some applications of thermomagnetometry to the study of chromindur alloys

Thermomagnetic experiments are shown to be a useful and rapid technique for studying phase changes involving magnetic materials. Particular examples are chosen from Chromindur II (Fe28Cr10.5Co) alloys having different thermal histories. The Curie temperature of the single phase alloy is found to be ～650°C and the metastable spinodal decomposition boundary is at essentially the same temperature. The Cr-rich near equilibrium decomposition product is less magnetic and has a lower T_c, while the Cr-deficient product is more magnetic, with a T_c ? 720°C.Comparisons are made at different heating and cooling rates between temperatures measured using magnetic standards and those measured by a thermocouple in close proximity to the sample.     

Fast visible dye staining of proteins in one- and two-dimensional sodium dodecyl sulfate-polyacrylamide gels compatible with matrix assisted laser desorption/ionization-mass spectrometry

A fast and matrix assisted laser desorption/ionization-mass spectrometry (MALDI-MS) compatible protein staining method in one- and two-dimensional sodium dodecyl sulfate-polyacrylamide gel electrophoresis (1- and 2-D SDS-PAGE) is described. It is based on the counterion dye staining method that employs oppositely charged two dyes, zincon (ZC) and ethyl violet (EV) to form an ion-pair complex. The protocol, including fixing, staining and quick washing steps, can be completed in 1-1.5 h depending upon gel thickness. It has a sensitivity of 4-8 ng, comparable to that of colloidal Coomassie Brilliant Blue G (CBBG) staining with phosphoric acid in the staining solution. The counterion dye stain does not induce protein modifications that complicate interpretation of peptide mapping data from MS. Considering the speed, sensitivity and compatibility with MS, the counterion dye stain may be more practical than any other dye-based protein stains for routine proteomic researches.     

Global Forcing Number of Benzenoid Graphs

A global forcing set in a simple connected graph G with a perfect matching is any subset S of E(G) such that the restriction of the characteristic function of perfect matchings of G on S is an injection. The number of edges in a global forcing set of the smallest cardinality is called the global forcing number of G. In this paper we prove several results concerning global forcing sets and numbers of benzenoid graphs. In particular, we prove that all catacondensed benzenoids and catafused coronoids with n hexagons have the global forcing number equal to n, and that for pericondensed benzenoids the global forcing number is always strictly smaller than the number of hexagons.