采用金属有机骨架材料M(HBTC)(4,4'-bipy)·3DMF(M=Ni,Co,Zn)催化CO_2与环氧丙烷的环加成反应（英文）

采用溶剂热法合成了三种M(HBTC)(4,4’-bipy)·3DMF(M=Ni,Co,Zn,HBTC=1,3,5-均苯三甲酸,4,4’-bipy=4,4′-联吡啶)结构的支柱层金属有机骨架材料(MOFs).首次采用溶剂热和微波法合成了Zn(HBTC)(4,4’-bipy)·3DMF,并采用多种物理化学方法对其进行了表征.M(HBTC)(4,4’-bipy)·3DMF中包含有M2+离子的蜂窝网格层和BTC单元,BTC单元与4,4’-联吡啶柱进一步交联形成三维多孔骨架材料.在采用烷基铵卤化物作为助催化剂和无溶剂的条件下,所有MOFs材料均对催化固定CO_2与环氧化合物环加成制备环状碳酸酯反应表现出非常好的协同催化性能,其催化活性高低顺序为:ZnCoNi,这可通过酸-碱双功能特性进行解释.采用微波法合成的Zn(HBTC)(4,4’-bipy)·3DMF材料表现出与常规催化剂相似的物理化学性质和催化性能.考察了不同制备参数的影响和材料的重复使用性能,并提出了该反应的可能机理     

Conjugated polymer‐functionalized graphite oxide sheets thin films for enhanced photovoltaic properties of polymer solar cells

In this study, the maleimide‐thiophene copolymer‐functionalized graphite oxide sheets (PTM21‐GOS) and carbon nanotubes (PTM21‐CNT) were developed for polymer solar cell (PSC) applications. The grafting of PTM21‐OH onto the CNT and GO sheets was confirmed using FTIR spectroscopy. PTM21‐CNT and PTM21‐GOS exhibited excellent dispersal behavior in organic solvents. Better thermal stability was observed for PTM21‐CNT and PTM21‐GOS as compared with that for PTM21‐OH. In addition, the optical band gaps of PTM21‐GOS and PTM21‐CNT were lower than that of PTM21‐OH. We incorporated PTM21‐GOS and PTM21‐CNT individually into poly(3‐hexylthiophene) (P3HT)/[6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) blends for use as photoconversion layers of PSCs. Good distributional homogeneity was observed for PTM21‐GOS or PTM21‐CNT in the P3HT/PCBM blend film. The UV–vis absorption peaks of the blend films red‐shifted slightly upon increasing the content of PTM21‐GOS or PTM21‐CNT. The band gap energies and LUMO/HOMO energy levels of the P3HT/PTM21‐GOS and P3HT/PTM21‐CNT blend films were slightly lower than those of the P3HT film. The conjugated polymer‐functionalized PTM21‐GOS and PTM21‐CNT behaved as efficient electron acceptors and as charge‐transport assisters when incorporated into the photoactive layers of the PSCs. PV performance of the PSCs was enhanced after incorporating PTM21‐GOS or PTM21‐CNT in the P3HT/PCBM blend. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Colorizing mechanism of brass surface by femtosecond laser induced microstructures

In this paper, we exhibit the colorizing of brass surfaces by forming femtosecond laser induced microstructures on the sample surfaces. A variety of single colors such as brown, yellow, green, and black are introduced on brass surfaces by engineering periodic microgratings, microholes, and ring-shaped micro-patterns using Single Beam Direct Laser Writing (SBDLW) technique. The color of the micro-structured brass surfaces is certainly dependent on the width, depth, and period of the microstructures. Finally, we explain, in brief, the colorizing mechanism of metals by femtosecond laser induced microstructures.     

Migration of indium ions in amorphous indium-gallium-zinc-oxide thin film transistors

Electromigration of In in amorphous indium-gallium-zinc-oxide thin film transistors under repeated switching operation was investigated by analyzing the distribution of component elements. During the repeated switching operations up to 300 times, threshold voltage of this device increased gradually implying alteration to the internal device structures. Energy dispersive X-ray spectroscopy revealed noticeable redistribution of metallic components, especially In, in the channel layer beneath the source electrode during switching operations by the migration of metallic ions away from the source electrode, which is attributed to electromigrations similar to those observed in organic light emitting diodes having indium tin oxide electrodes.     

Molecular Recognition in Glycolaldehyde,the Simplest Sugar: Two Isolated Hydrogen Bonds Win Over One Cooperative Pair

Carbohydrates are used in nature as molecular recognition tools. Understanding their conformational behavior upon aggregation helps in rationalizing the way in which cells and bacteria use sugars to communicate. Here, the simplest α-hydroxy carbonyl compound, glycolaldehyde, was used as a model system. It was shown to form compact polar C₂-symmetric dimers with intermolecular O–H⋅⋅⋅O=C bonds, while sacrificing the corresponding intramolecular hydrogen bonds. Supersonic jet infrared (IR) and Raman spectra combined with high-level quantum chemical calculations provide a consistent picture for the preference over more typical hydrogen bond insertion and addition patterns. Experimental evidence for at least one metastable dimer is presented. A rotational spectroscopy investigation of these dimers is encouraged, also in view of astrophysical searches. The binding motif competition of aldehydic sugars might play a role in chirality recognition phenomena of more complex derivatives in the gas phase.     

Synthesis and proton conductivity of sulfonated,multi‐phenylated poly(arylene ether)s

A series of sterically‐encumbered, sulfonated, poly(arylene ether) copolymers were synthesized and their proton conductivity examined. The series was prepared by copolymerizing a novel monomer, 2″,3″,5″,6″‐tetraphenyl‐[1,1′:4',1″:4″,1″':4″',1″″‐quinquephenyl]‐4,4″″‐diol, with 4,4'‐difluorobenzophenone and bisphenol A. Subsequent sulfonation and solution casting provided membranes possessing ion exchange capacities of 1.9 to 2.7 mmol/g and excellent mechanical properties (Young's modulus, 0.2–1.2 GPa; tensile strength, 35–70 MPa; elongation at break, 62–231%). Water uptake ranged from 34 to 98 wt% at 80 °C/100% RH. Proton conductivities ranged between 0.24 to 16 mS/cm at 80 °C/60% RH, and 3 to 167 mS/cm at 80 °C/95% RH. TEM analysis of the polymers, in the dehydrated state, revealed isolated spherical aggregates of ions, which presumably coalesce when hydrated to provide highly conductive pathways. The strategy of using highly‐encumbered polymer frameworks for the design of mechanically‐robust and dimensionally‐stable proton conducting membranes is demonstrated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2579‐2587     

Effect of irradiation on the cryogenic mechanical characteristics of polyurethane foam

The present study investigated thermal and mechanical characteristics of irradiated polyurethane foams (PUFs) according to the irradiation does under various temperature conditions, including low/cryogenic temperatures. Fourier transform infrared analysis was performed to obtain information on the PUF molecular structure. In addition, Macro- and microstructural investigations were carried out to determine the relationship between thermal and mechanical characteristics and irradiation dose. The test results were quantitatively presented, and it was found that the irradiated PUF has potential for application in industrial structures.     

An extended chaotic-maps-based protocol with key agreement for multiserver environments

Due to the rapid development and growth of computer networks, there have been greater and greater demands for remote password authentication protocols. Recently, the focus has been on protocols for multiserver environments that run on smart cards. These protocols typically count on the nonce or timestamp to provide protection against the replay attack. However, as Tsaur et al. pointed out, these protocols have some security issues such as disturbance in clock synchronization and vulnerability to the man-in-the-middle attack. In order to solve the above problems, Tsaur et al. proposed a multiserver authentication scheme with key agreement in 2012, and they claimed that their scheme could effectively achieve password-authenticated key agreement while getting around the technical difficulty of implementing clock synchronization in multiserver environments. Unfortunately, we found out that Tsaur et al.’s protocol still has the following weaknesses: (1) inability to resist privileged insider attack, (2) inability to resist known-plaintext attack, (3) inability to provide user anonymity, and (4) lack of perfect forward secrecy. To fix these secure flaws of Tsaur et al.’s protocol, in this paper, we shall propose an improved multiserver authentication protocol with key agreement based on extended chaotic maps. We shall also offer formal proof of smooth execution of the improved authenticated key agreement protocol.