Synthesis and structure of anhydroindanone‐1 disulfide

An unexpectedly high yield of anhydroindanone‐1 disulfide (1) was obtained by reaction of Lawesson's reagent with indanone‐1. The molecular structure of 1 was established by X‐ray diffraction. A possible mechanism of the reaction is discussed. © 1999 John Wiley & Sons, Inc. Heteroatom Chem 10: 369–371, 1999     

Ionic liquid matrices for MALDI mass spectrometry of lignin

Analytical and Bioanalytical Chemistry - The use of matrix-assisted laser desorption/ionization (MALDI) mass spectrometry for the study of lignin is still extremely limited due to its low...     

Transformations of 5-(2-arylethynyl)-2-methyl-2H-tetrazoles under superelectrophilic activation

Reaction of 5-arylethynyl-2-methyl-2H-tetrazoles (acetylene tetrazoles) with arenes under the action of Brønsted superacid CF₃SO₃H or acidic zeolite HUSY CBV-720 gives rise to E-/Z-5-(2,2-diarylethenyl)-2-methyl-2H-tetrazoles, as products of hydroarylation of acetylene bond, in yields up to 98% with predominant formation of E-isomers. Cationic intermediates of these reactions have been studied theoretically by DFT calculations. Addition of CF₃SO₃H to the triple bond of acetylene tetrazoles leads to the corresponding E-/Z-vinyl triflates in high yields. Hydration of triple bond in these tetrazoles in H₂SO₄ results in the formation of 5-(2-aryl-2-oxoethyl)-2-methyl-2H-tetrazoles. Tandem hydroarylation-ionic hydrogenation of acetylene tetrazoles in the systems acid(CF₃SO₃H or AlCl₃)-arene-cyclohexane affords 5-(2,2-diarylethyl)-2-methyl-2H-tetrazoles.     

Electrochemical co-deposition for the synthesis of PtPb electrocatalysts

1. Download high-res image (86KB)
2. Download full-size image

     

A Planar‐Chiral Rhodium(III) Catalyst with a Sterically Demanding Cyclopentadienyl Ligand and Its Application in the Enantioselective Synthesis of Dihydroisoquinolones

The rapid development of enantioselective C?H activation reactions has created a demand for new types of catalysts. Herein, we report the synthesis of a novel planar‐chiral rhodium catalyst [(C₅H₂^tBu₂CH₂^tBu)RhI₂]₂ in two steps from commercially available [(cod)RhCl]₂ and tert‐butylacetylene. Pure enantiomers of the catalyst were obtained through separation of its diastereomeric adducts with natural (S)‐proline. The catalyst promoted enantioselective reactions of aryl hydroxamic acids with strained alkenes to give dihydroisoquinolones in high yields (up to 97 %) and with good stereoselectivity (up to 95 % ee).     

The influence of compression conditions on the peculiarities of self-propagating exothermal reaction in Al–Ni powder reactive materials

The paper deals with the effect of the compression conditions on the propagation front velocity of exothermal reaction and the specific heat release in Al–Ni powder reactive materials with mean particle sizes of 70–110 nm. It was shown that the velocity increases from 2.7 to 8 cm s^?1 and comes to saturation with the lowering of the porosity (η) from 0.91 to 0.34, while the dependence of the specific heat release has its maximum for η?=?0.5. The results of the X-ray diffraction analysis obtained in situ during the sample heating suggest that the sequence of phase transformations in the system does not depend on the porosity. In all cases, first in the temperature range of ~?500–540 °C the NiAl compound is formed. With the further heating up to ~?640 °C, the Ni₃Al, Ni₂Al₃ and NiAl₃ compounds are additionally formed. The calculation of kinetic parameters was performed using the obtained curves of the differential scanning calorimetry: activation energy, pre-exponential factor and reaction model. The comparison of the calculated results and the scanning electron microscopy data has shown that such behavior of the Al–Ni system with the porosity lowering occurs due to the growth of the transformation degree and is associated with the presence in the final powder mixture of mutually non-contacting Al and Ni agglomerates with the dimensions of over 10 μm.     

Utilization of (p, 4n) reaction for <Superscript>86</Superscript>Zr production with medium energy protons and development of a <Superscript>86</Superscript>Zr → <Superscript>86</Superscript>Y radionuclide generator

Utilization of (p, 4n) reaction channel for the production of medical radionuclides became very attractive with commercial availability of medium energy cyclotrons. Significantly higher yields and radionuclidic purity may open new perspectives for several novel and some of the radionuclides previously have not been considered due to production difficulties. In present work, we show the proof-of-principle study on the production of ⁸⁶Y for Positron Emission Tomography imaging via radionuclide generator ⁸⁶Zr → ⁸⁶Y. Production suitability of ⁸⁶Zr from natural yttrium target and radiochemical separation strategies were tested. In addition, two generator systems were proposed and evaluated.     

Regioselective synthesis of new imidazo[4,5-e][1,3]thiazino[2,3-c][1,2,4]triazines via reaction of imidazo[4,5-e][1,2,4]triazinethiones with ethyl phenylpropiolate

A method for the regioselective synthesis of imidazo[4,5-e][1,3]thiazino[2,3-c][1,2,4]triazine derivatives has been developed by the reaction of imidazotriazinethiones with ethyl phenylpropiolate upon treatment with potassium carbonate or sodium methoxide in methanol. The synthesis was accomplished by Michael-type addition of the imidazotriazinethiones to the triple bond of ethyl phenylpropiolate followed by subsequent intramolecular cyclization.