Über die natur der übergangsmetall-kohlenstoff-σ-bindung: IX. Über die darstellung und charakterisierung von η5-cyclopentadienyl-triphenylphosphin-nickel-η1-thioanisolyl und seine thermische zersetzung in nickelthiophenolatokomplexe

The reaction of Cp(PPh₃)NiCl (Cp = η⁵-C₅H₅) with PhSCH₂Li gives Cp(PPh₃)Ni(η¹-CH₂SPh) (I), which has been isolated as green crystals and characterized by elemental analysis, magnetic measurement, ¹H NMR and mass spectroscopic investigations and by protolysis to form PhSCH₃. Cp₂Ni also reacts with PhSCH₂Li in the presence of PPh₃ to give I containing 5–10% of Cp(PPh₃)NiSPh (II) and about 1% of [CpNiSPh]₂ (III) as impurities. In the absence of PPh₃, III is formed, with the release of ethylene and cyclopropane, even at a temperature of ?20°C. For comparison, II has been synthesized from Cp₂Ni, PPh₃ and LiSPh and from the reaction of III with PPh₃.I decomposes in boiling benzene to give II (ca. 33%) and III (ca. 13%). The conversion of the thioanisolyl into thiophenolato complexes can be understood on assuming that {CpNi(η²-CH₂SPh)} is formed as an unstable intermediate.     

Assembling a Phthalocyanine and Perylenediimide Donor–Acceptor Hybrid through a Platinum(II) Diacetylide Linker

In a novel electron‐donor–acceptor conjugate, phthalocyanine (Pc) and perylenediimide (PDI) are connected through a trans‐platinum(II) diacetylide linker to yield Pc‐Pt‐PDI 1 . In the ground state, the presence of Pt^II disrupts the electronic communication between the two electroactive components, as revealed by UV/Vis spectroscopy and electrochemical studies. The photophysical behavior of 1 is compared with that of the corresponding Pc‐PDI electron‐donor–acceptor conjugate 2 in terms of charge separation and charge recombination. The insertion of Pt^II between Pc and PDI impacts the results in a longer‐lived Pc ^{. +}/PDI ^{. ?} radical ion‐pair state. In addition, the intermediately formed Pc triplet excited state is formed with higher quantum yields in 1 than in 2 .     

At-line bioprocess monitoring by immunoassay with rotationally controlled serial siphoning and integrated supercritical angle fluorescence optics

In this paper we report a centrifugal microfluidic “lab-on-a-disc” system for at-line monitoring of human immunoglobulin G (hIgG) in a typical bioprocess environment. The novelty of this device is the combination of a heterogeneous sandwich immunoassay on a serial siphon-enabled microfluidic disc with automated sequential reagent delivery and surface-confined supercritical angle fluorescence (SAF)-based detection. The device, which is compact, easy-to-use and inexpensive, enables rapid detection of hIgG from a bioprocess sample. This was achieved with, an injection moulded SAF lens that was functionalized with aminopropyltriethoxysilane (APTES) using plasma enhanced chemical vapour deposition (PECVD) for the immobilization of protein A, and a hybrid integration with a microfluidic disc substrate. Advanced flow control, including the time-sequenced release of on-board liquid reagents, was implemented by serial siphoning with ancillary capillary stops. The concentration of surfactant in each assay reagent was optimized to ensure proper functioning of the siphon-based flow control. The entire automated microfluidic assay process is completed in less than 30 min. The developed prototype system was used to accurately measure industrial bioprocess samples that contained 10 mg mL⁻¹ of hIgG.     

A Microgel Construction Kit for Bioorthogonal Encapsulation and pH‐Controlled Release of Living Cells

pH‐Cleavable cell‐laden microgels with excellent long‐term viabilities were fabricated by combining bioorthogonal strain‐promoted azide–alkyne cycloaddition (SPAAC) and droplet‐based microfluidics. Poly(ethylene glycol)dicyclooctyne and dendritic poly(glycerol azide) served as bioinert hydrogel precursors. Azide conjugation was performed using different substituted acid‐labile benzacetal linkers that allowed precise control of the microgel degradation kinetics in the interesting pH range between 4.5 and 7.4. By this means, a pH‐controlled release of the encapsulated cells was achieved upon demand with no effect on cell viability and spreading. As a result, the microgel particles can be used for temporary cell encapsulation, allowing the cells to be studied and manipulated during the encapsulation and then be isolated and harvested by decomposition of the microgel scaffolds.     

Electroactive Polymers: Developments of and Perspectives for Dielectric Elastomers

We present the development and applications of dielectric elastomers. For the last 10 years the significance of this class of polymers has risen as more applications seem possible and first products have been commercialized.     

Aufbau und Abbau von (NH4)[BF4] und H3N‐BF3

Production and Decomposition of (NH₄)[BF₄] and H₃N‐BF₃ (NH₄)[BF₄] is produced as single crystals during the reaction of elemental boron and NH₄HF₂ (B : NH₄HF₂ = 1 : 2) and NH₄F (B : NH₄F = 1 : 4), respectively, in sealed copper ampoules at 300 °C. The crystal structure (baryte type, orthorhombic, Pnma, Z = 4) was redetermined at ambient temperature (a = 909.73(18), b = 569.77(10), c = 729.47(11) pm, R_all = 0.0361) and at 140 K (a = 887.3(2), b = 574.59(12), c = 717.10(12) pm, R_all = 0.0321). Isolated (NH₄)⁺ and [BF₄]^— tetrahedra are the important building units. The thermal behaviour of (NH₄)[BF₄] was investigated under inert (Ar, N₂) and reactive conditions (NH₃) with the aid of DTA/TG and DSC measurements and with in‐situ X‐ray powder diffraction as well. Finally, (NH₄)[BF₄] is decomposed yielding NH₃ and BF₃, BN is not produced under the current conditions. Colourless single crystals of H₃N‐BF₃ were prepared directly from the components NH₃ and BF₃. The crystal structure was determined anew at 293 and 170 K (orthorhombic, Pbca, Z = 8, a = 815.12(10), b = 805.91(14), c = 929.03(12) pm, R_all = 0.0367; a = 807.26(13), b = 800.48(10), c = 924.31(11) pm, R_all = 0.0292, T = 170 K). The crystal structure contains isolated molecules H₃N‐BF₃ in staggered conformation with a B‐N distance of 158 pm. The thermal behaviour of H₃N‐BF₃ was studied likewise.