Generation of hard X-ray radiation using the triboelectric effect by peeling adhesive tape

The triboelectric effect describes electrical charging when bringing different materials into contact. We report on the generation of hard X-ray radiation by peeling various adhesive tapes under medium vacuum conditions. Beside vacuum housing and pumps as instrumentation only an electric motor, two rolls and a metal foil as target material are necessary. The spectral distribution of generated X-rays was analyzed using an energy-dispersive detector. Depending on peeling speed, pressure and choice of material combination, electrons with energies sufficient to excite emission in the hard X-ray region are produced. The results are discussed in terms of triboelectric separation of charge carriers.     

Widely tunable monolithic narrowband grating filter for near-infrared radiation

We propose a monolithic narrowband guided-mode grating filter in fused silica that is widely tunable in the near-IR wavelength region. Based on a recently demonstrated approach for a monolithic reflector comprising an encapsulated grating, we theoretically investigate such a device by means of rigorous modeling aimed at a narrow linewidth. It is demonstrated that upon a spatial variation of the filter's grating period its resonance wavelength can be tuned in a remarkably wide range of near-IR radiation with 800 nm<λ(res)< 1600 nm by translating the laser beam relative to the grating area. The filter performance in terms of linewidth and contrast is essentially preserved over the entire tuning interval.     

Search for sub-eV mass solar axions by the CERN Axion Solar Telescope with 3He buffer gas

The CERN Axion Solar Telescope (CAST) has extended its search for solar axions by using (3)He as a buffer gas. At T=1.8 K this allows for larger pressure settings and hence sensitivity to higher axion masses than our previous measurements with (4)He. With about 1 h of data taking at each of 252 different pressure settings we have scanned the axion mass range 0.39 eV?m(a)?0.64 eV. From the absence of excess x rays when the magnet was pointing to the Sun we set a typical upper limit on the axion-photon coupling of g(aγ)?2.3×10(-10) GeV(-1) at 95% C.L., the exact value depending on the pressure setting. Kim-Shifman-Vainshtein-Zakharov axions are excluded at the upper end of our mass range, the first time ever for any solar axion search. In the future we will extend our search to m(a)?1.15 eV, comfortably overlapping with cosmological hot dark matter bounds.     

Test of an optical parametric oscillator (OPO) as a compact and fast tunable stokes source in coherent anti-stokes raman spectroscopy (CARS)

An optical parametric oscillator (OPO), as a novel kind of broadband Stokes source, is employed for coherent anti-Stokes Raman spectroscopy (CARS). Compared to the conventional dye laser configuration OPO-CARS offers practical advantages. The tunable OPO allows a fast and comfortable frequency tuning. The excitation bandwidth of about 35 cm^–1 (FWHM) limits the spectral range of effective and stable single pulse CARS generation but can be used to enhance selected spectral structures.     

13C-Leucin-Atemtest zur Beurteilung der anabolen Verwertung von diätetischen Aminosäurengemischen bei Phenylketonurie

It is essential to establish whether and how environmental factors affect the reliability of [¹³C]methacetin breath test (¹³C-MBT). In 12 healthy volunteers (smokers), a standard ¹³C-MBT with 75 mg [¹³C]methacetin was performed twice in random order: on a control day without smoking and on another day with smoking two cigarettes antecedently. A considerable flattening of the curve of the momentary ¹³C recovery within the expiratory air was observed when the ¹³C-MBT was performed after smoking. The maximum of the momentary ¹³C recovery, D _max, decreased from 37.20±2.58 to 25.39±2.29% dose/h (p=0.00052). Moreover, the time to reach D _max was prolonged after cigarette smoking (26.5±3.1 vs. 16.5±1.9 min, p=0.0199). The curve of the cumulative ¹³C recovery on the cigarette smoking day appeared to be shifted downwards, and statistically significant differences relative to the control situation were found between the 24th and 75th minute following [¹³C]methacetin administration. Smoking cigarettes immediately prior to the ¹³C-MBT diminishes the ability of the liver to handle methacetin, and hence a possibility of such an interaction should be excluded in order to interpret the results of the test correctly.     

The materials science X‐ray beamline BL8 at the DELTA storage ring

The hard X‐ray beamline BL8 at the superconducting asymmetric wiggler at the 1.5 GeV Dortmund Electron Accelerator DELTA is described. This beamline is dedicated to X‐ray studies in the spectral range from ～1 keV to ～25 keV photon energy. The monochromator as well as the other optical components of the beamline are optimized accordingly. The endstation comprises a six‐axis diffractometer that is capable of carrying heavy loads related to non‐ambient sample environments such as, for example, ultrahigh‐vacuum systems, high‐pressure cells or liquid‐helium cryostats. X‐ray absorption spectra from several reference compounds illustrate the performance. Besides transmission measurements, fluorescence detection for dilute sample systems as well as surface‐sensitive reflection‐mode experiments have been performed. The results show that high‐quality EXAFS data can be obtained in the quick‐scanning EXAFS mode within a few seconds of acquisition time, enabling time‐resolved in situ experiments using standard beamline equipment that is permanently available. The performance of the new beamline, especially in terms of the photon flux and energy resolution, is competitive with other insertion‐device beamlines worldwide, and several sophisticated experiments including surface‐sensitive EXAFS experiments are feasible.     

ESPI solution for non-contacting MEMS-on-wafer testing

Rapid progress in the field of micro-electro-mechanical systems (MEMS) makes the development of appropriate measuring and testing means timely. Characterizing the mechanical properties of MEMS structures at a very early stage of manufacturing is a challenging task for quality assurance in this field. The paper describes a new solution that is based upon the vibration analysis of the microparts. The nanometer amplitudes are detected by advanced electronic speckle pattern interferometry (ESPI). A specific signal processing technique has been applied to make the solution robust. Comprehensive numerical simulations provide the theoretical base for the HNDT concept. A laboratory system for 4″ wafer has been built, and extensive tests show that such key properties as e.g. the thickness of springs or membranes can be determined exactly. Automated frequency scanning and corresponding digital image processing open the way to reliable and fast industrial systems for MEMS testing on wafer level.     

Multi-conjugate solar adaptive optics at the Vacuum Tower Telescope on Tenerife

We present a breadboard multi-conjugate adaptive optics (MCAO) system for high angular resolution solar observations which we operate at the Vacuum Tower Telescope. We have developed methods to estimate quantitatively the performance of solar adaptive optics from science data. Several sets of short exposure images of the solar photosphere were analyzed to assess the performance of the MCAO. We demonstrate that a 30 arcsec field of view is substantially improved when the MCAO system is turned on. This compares favourably with an improvement of a 10 arcsec field with conventional solar adaptive optics. We also show how irradiance fluctuations in the MCAO compensated focus can be suppressed. To cite this article: O. von der Lühe et al., C. R. Physique 6 (2005).