Capillary liquid chromatography and capillary electrochromatography using silica hydride stationary phases

A hydride-based octadecyl stationary phase on both 4.0 and 1.8 microm silica particles is tested in both the capillary LC and the pressurized capillary electrochromatography (pCEC) modes. These two materials are compared to standard C18 stationary phase made by organosilanization and to the hydride material packed into a convention 4.6mm I.D. column. The performance of the capillary columns is evaluated in terms of analysis times for various mixtures as well as efficiency. Of particular interest are the differences between the LC mode where only laminar flow is present and pCEC operation where a flat electrodriven flow profile is superimposed on the parabolic pressurized flow. Differences in performance between columns packed with 4.0 and 1.8 microm particle silica are also evaluated.     

Preparation, characterization, and photocatalytic activity of sulfate-modified titania for degradation of methyl orange under visible light

Hydrated titania was prepared by a sol-gel method, taking tetraisopropyl orthotitanate as starting material, and then promoted with different weight percentages of sulfate by an incipient wetness impregnation method. The materials were characterized by various advanced techniques such as PXRD, BET surface area, N(2) adsorption-desorption measurements, FTIR, and SEM. Analytical results demonstrated that TiO(2) is mesoporous in nature, and sulfate modification could inhibit the phase transformation and enhance the thermal stability of TiO(2). It was also found that sulfate modification could reduce the crystallite size and increase the specific surface area of the catalysts. The degradation of methyl orange under solar radiation was investigated to evaluate the photocatalytic activity of these materials. Effects of different parameters such as pH of the solution, amount of catalyst, additives, and kinetics were investigated. At 2.5 wt% sulfate loading, the average percentage of degradation of methyl orange was nearly two times than that of neat TiO(2). The photocatalytic degradation followed first-order kinetics.     

Development and validation of reversed-phase column high-performance liquid chromatographic and first-derivative UV spectrophotometric methods for estimation of voriconazole in oral suspension powder

This research paper describes validated reversed-phase high-performance column liquid chromatographic (RP-HPLC) and first-derivative UV spectrophotometric methods for the estimation of voriconazole (VOR) in oral suspension powder. The RP-HPLC separation was achieved on Phenomenex C18 column (250 x 4.6 mm id, 5 microm particle size) using water-acetonitrile (40 + 60, v/v; pH adjusted to 4.5 +/- 0.02 with acetic acid) as the mobile phase at a flow rate of 1.4 mL/min and ambient temperature. Quantification was achieved with photodiode array detection at 255 nm over the concentration range of 0.1-1 microg/mL with mean recovery of 99.49 +/- 0.83% for VOR by the RP-HPLC method. Quantification was achieved with UV detection at 266 nm over the concentration range of 8-20 microg/mL with mean recovery of 99.74 +/- 0.664% for VOR by the first-derivative UV spectrophotometric method. These methods are simple, precise, and sensitive, and they are applicable for the determination of VOR in oral suspension powder.     

Templating CdSe tetrapods at the air/water interface with POPC lipids

ZnS nanoparticles were precipitated in aqueous dispersions of cationic surfactant cetyltrimethylammonium bromide (CTAB). The sphere radii of ZnS nanoparticles calculated by using band-gap energies steeply decreased from 4.5 nm to 2.2 nm within CTAB concentrations of 0.4-1.5 mmol L(-1). Above the concentration of 1.5 mmol L(-1), the radii were stabilized at R=2.0 nm and increased up to R=2.5 nm after 24 h. The hydrodynamic diameters of CTAB-ZnS structures observed by the dynamic light scattering (DLS) method ranged from 130 nm to 23 nm depending on CTAB concentrations of 0.5-1.5 mmol L(-1). The complex structures were observed by transmission electron microscopy (TEM). At the higher CTAB concentrations, ZnS nanoparticles were surrounded by CTA(+) bilayers forming positively charged micelles with the diameter of 10nm. The positive zeta-potentials of the micelles and their agglomerates were from 16 mV to 33 mV. Wurtzite and sphalerite nanoparticles with R=2.0 nm and 2.5 nm covered by CTA(+) were modeled with and without water. Calculated sublimation energies confirmed that a bilayer arrangement of CTA(+) on the ZnS nanoparticles was preferred to a monolayer.     

Bifunctional yttrium(III) and titanium(IV) NHC catalysts for lactide polymerisation

Lewis acidic yttrium(III) and titanium(IV) derivatives of anionic, metal-tethered carbenes apparently act as bifunctional catalysts for the polymerisation of D,L-lactide, using a combination of Lewis acid and base functionalities to initiate ring opening of the cyclic monomer; the alcohol- and amino-functionalised carbenes from which they derive provide models for the first insertion step, and also display metal-free polymerisation catalysis to generate polylactic acid.     

A total reflection X‐ray fluorescence method for the determination of chlorine at trace levels in nuclear materials without sample dissolution

A total reflection X‐ray fluorescence (TXRF) method for the determination of chlorine at trace levels in nuclear fuel samples is described. Chlorine present in trace concentrations in nuclear fuel materials such as U₃O₈, (U,Pu)C, PuO₂ and Pu‐alloys was first separated from the solid matrix by pyrohydrolysis as HCl and was collected in 5 mM NaOH solution. This solution was analyzed for chlorine by TXRF spectrometry using Cl Kα analytical line excited by W Lα. Cobalt was used as internal standard. The precision for such chlorine determination was found to be within 27% (n = 4) when the analysis was carried out in air atmosphere. This could be improved to 8% by making TXRF measurement in flowing helium atmosphere. The results obtained from TXRF determinations were also compared with those obtained from ion chromatography (IC) and were in good agreement. The collection of distillate during pyrohydrolysis in NaOH helped in counterchecking loss of chlorine during TXRF sample preparation. The average deviation of TXRF‐determined values in helium‐purged TXRF measurements with IC determined values (as chloride) was 15% at a chlorine concentration level in the range of 1–70 µg/mL. Copyright © 2012 John Wiley & Sons, Ltd.     

Post-Synthetic Modification of Zr-based Metal-Organic Frameworks with Imidazole: Variable Optical Behavior and Sensing

UiO-66-NH₂-IM, a fluorescent metal-organic framework (MOF), was synthesized by post-synthetic modification of UiO-66-NH₂ with 2-imidazole carboxaldehyde via a Schiff base reaction. It was examined using various characterization techniques (PXRD, FTIR, NMR, SEM, TGA, UV-Vis DRS, and photoluminescence spectroscopy). The emissive feature of UiO-66-NH₂-IM was utilized to detect volatile organic compounds (VOCs), metal ions, and anions, such as acetone, Fe³⁺, and carbonate (CO₃²⁻). Acetone turns off the high luminescence of UiO-66-NH₂-IM in DMSO, with the limit of detection (LOD) being 3.6 ppm. Similarly, Fe³⁺ in an aqueous medium is detected at LOD=0.67 μM (0.04 ppm) via quenching. On the contrary, CO₃²⁻ in an aqueous medium significantly enhances the luminescence of UiO-66-NH₂-IM, which is detected with extremely high sensitivity (LOD=1.16 μM, i. e., 0.07 ppm). Large Stern-Volmer constant, K_sv, and low LOD values indicate excellent sensitivity of the post-synthetic MOF. Experimental data supported by density functional theory (DFT) calculations discern photo-induced electron transfer (PET), resonance energy transfer (RET), inner filter effect (IFE), or proton abstraction as putative sensing mechanisms. NMR and computational studies propose a proton abstraction mechanism for luminescence enhancement with CO₃²⁻. Moreover, the optical behavior of the post-synthetic material toward analytes is recyclable.