A spectroscopic study on the 12-heteropolyacids of molybdenum and tungsten (H3PMo12−nWnO40) combined with cetylpyridinium bromide in the epoxidation of cyclopentene

The epoxidation of cyclopentene with hydrogen peroxide catalyzed by 12-heteropolyacids of molybdenum and tungsten (H₃PMo_12−nW_nO₄₀, n = 1–11), 12-tungstophosphoric acid and 12-molybdophosphoric acid combined with cetylpyridinium bromide as a phase transfer reagent was carried out in acetonitrile. Among 13 heteropolyacids investigated, catalyst of H₃PMo₆W₆O₄₀ showed the highest activity, giving a conversion of 60% and a selectivity of 95% in the epoxidation of cyclopentene. The fresh catalysts and the catalysts under reaction condition were characterized by UV–vis, FT-IR and ³¹P NMR spectroscopy, which has revealed that all of the molybdotungstophosphoric acids were degraded in the presence of hydrogen peroxide to form a considerable amount of phosphorus-containing species. The active species resulted from H₃PMo₆W₆O₄₀ are new kinds of phosphorus-containing species, which is different from {PO₄[WO(O₂)₂]₄}³⁻.     

Controlled growth of large-area, uniform, vertically aligned arrays of alpha-Fe2O3 nanobelts and nanowires

Vertically aligned iron oxide nanobelt and nanowire arrays have been synthesized on a large-area surface by direct thermal oxidation of iron substrates under the flow of O(2). The effects of reactive gas pressure, composition, and temperature have been systematically studied. It was found that nanobelts (width, tens of nanometers; thickness, a few nanometers) are produced in the low-temperature region (approximately 700 degrees C) whereas cylindrical nanowires tens of nanometers thick are formed at relatively higher temperatures (approximately 800 degrees C). Both nanobelts and nanowires are mostly bicrystallites with a length of tens of micrometers which grow uniquely along the [110] direction. The growth habits of the nanobelts and nanowires in the two temperature regions indicate the role of growth rate anisotropy and surface energy in dictating the ultimate nanomorphologies.     

锌试剂分光光度法测定壳聚糖含量

利用锌试剂与壳聚糖在一定酸度条件下的特异性显色反应，即其复合物在465nm处吸光度与壳聚糖含量在0～O．04g／L范围内呈现良好的线性关系(R=0．996)，基于此建立了一种简便快速的分光光度法。平均回收率为99．68％。     

杯芳烃的配位化学──Ⅳ.对叔丁基杯[8]芳烃与钙、镉配合物的合成与表征

本文合成了对叔丁基杯[8]芳烃(H₈L)与钙、镉的固体配合物。并以元素分析、核磁共振、热谱、红外谱、紫外谱等进行表征。其配合物的组成分别为Ca(H₆L)·6dmf及Cd(H₆L)·6dmf.     

反相高效液相色谱法半制备分离[T(4-MOP)PS4]卟啉的研究

本文研究了新水溶性５，１０，１５，２０－四（４－甲氧基－３－磺酸苯基）卟啉［Ｔ（４－ＭＯＰ）ＰＳ４］的反相高效液相色谱（ＨＰＬＣ）分离条件。采用ＳｈｉｍｐａｃｋＰＲＥＰ－ＯＤＳ半制备色谱柱，用含有１０ｍｍｏｌ／Ｌ四乙基碘化铵的乙腈－水（体积比２５：７５）为流动相，流速１８ｍＬ／ｍｉｎ，于４１８ｎｍ波长下检测。［Ｔ（４－ＭＯＰ）ＰＳ４］与合成中生成的杂质组分完全分离。经此制备的卟啉纯度高，已成功地应用于自来水样中微量钴、锌、铜离子的ＨＰＬＣ测定中。     

[α-(2-氧代烷基)-α-(取代苯胺基)甲基苯基]-β-D-吡喃阿洛糖苷的合成及镇静活性研究

以豆腐果苷为原料, 通过Mannich反应与取代苯胺和脂肪酮共合成了七个豆腐果苷衍生物, 均未见文献报道. 其结构经¹H NMR, IR, MS和HRMS确认, 并进行了药理活性筛选. 结果表明, 部分化合物均具有良好的镇静活性. 其中, 化合物2a (200 mg/kg), 2b (200 or 100 mg/kg)和2e (200 mg/kg)与豆腐果苷相比较, 具有更强的疗效.     

氟化镁锶中铕和铽的电荷迁移及其平衡解析

在氩气氛中，合成了SrMgF4：xEu，yTb复合组化物磷光体．该体系中Eu3 和Eu2 共存．随共掺入Tb浓度的增加，Eu3 的荧光发射强度降低，Eu2 的发光增强；并且Eu2 的ESR信号增强．认为Eu3 和Tb3 之间存在电荷迁移．即Eu3 ＋Tb3 →Eu2 ＋Tb4 .通过半定量手段研究了这一电荷迁移反应的平衡常数     

Uncoupled metabolism stimulated by chemical uncoupler and oxic-settling-anaerobic combined process to reduce excess sludge production

The effects of three uncoupled metabolic systems (conventional activated sludge process with the addition of 3,3′,4′,5-tetrachlorosalicylanilide [TCS], oxic-settling-anaerobic [OSA] process modified by insertion of a sludge-holding tank in the sludge return line, and TCS and OSA combined process) on reducing excess sludge production were studied. Compared with the control conventional activated sludge process, the most effective system was the combined process, which could reduce excess sludge production by 46.90%. The 180-d operation results confirmed that TCS is an effective chemical uncoupler in reducing the sludge yield but that it had an adverse effect on substrate removal capability, effluent nitrogen concentration, and sludge settleability. The OSA process decreased excess sludge production by only 26% but had less adverse effect on effluent quality and could improve sludge settleability. The effluent total phosphorous concentration of the three systems was slightly lower than of the control unit. Microbial populations were monitored by both microscopic and molecular biologic analysis method (polymerase chain reaction [PCR]-denaturing gradient gel electrophoresis [DGGE]). The presence of TCS caused metazoans to disappear and decreased the number and activity of protozoa. PCR amplification of 16S rRNA and sequent DGGE analysis found a shift in the diversity of the predominant species. The results imply that OSA combined with the chemical uncoupler process may effectively reduce excess sludge yield and not affect process performance significantly.     

Effects of processing on the structure of zein/oleic Acid films investigated by x-ray diffraction

Zein films plasticized with oleic acid were formed by solution casting, by the stretching of moldable resins, and by blown film extrusion. The effects of the forming process on film structure were investigated by X-ray diffraction. Wide-angle X-ray scattering (WAXS) patterns showed d-spacings at 4.5 and 10 A, which were attributed to the zein alpha-helix backbone and inter-helix packing, respectively. The 4.5 A d-spacing remained stable under processing while the 10 A d-spacing varied with processing treatment. Small-angle X-ray scattering (SAXS) detected a long-range periodicity for the formed films but not for unprocessed zein, which suggests that the forming process-promoted film structure development is possibly aided by oleic acid. The SAXS d-spacing varied among the samples (130-238 A) according to zein origin and film-forming method. X-ray scattering data suggest that the zein molecular structure resists processing but the zein supramolecular arrangements in the formed films are dependent on processing methods. Structural model for a zein molecular aggregate (based on Matsushima et al.10). Rectangular prisms of individual zein molecules are hexagonally aligned parallel to each other.