Microgel-based engineered nanostructures and their applicability with template-directed layer-by-layer polyelectrolyte assembly in protein encapsulation

A novel strategy for the fabrication of microcapsules is elaborated by employing biomacromolecules and a dissolvable template. Calcium carbonate (CaCO(3)) microparticles were used as sacrificial templates for the two-step deposition of polyelectrolyte coatings by surface controlled precipitation (SCP) followed by the layer-by-layer (LbL) adsorption technique to form capsule shells. When sodium alginate was used for inner shell assembly, template decomposition with an acid resulted in simultaneous formation of microgel-like structures due to calcium ion-induced gelation. An extraction of the calcium after further LbL treatment resulted in microcapsules filled with the biopolymer. The hollow as well as the polymer-filled polyelectrolyte capsules were characterized using confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), and scanning force microscopy (SFM). The results demonstrated multiple functionalities of the CaCO(3) core - as supporting template, porous core for increased polymer accommodation/immobilization, and as a source of shell-hardening material. The LbL treatment of the core-inner shell assembly resulted in further surface stabilization of the capsule wall and supplementation of a nanostructured diffusion barrier for encapsulated material. The polymer forming the inner shell governs the chemistry of the capsule interior and could be engineered to obtain a matrix for protein/drug encapsulation or immobilization. The outer shell could be used to precisely tune the properties of the capsule wall and exterior. [Diagram: see text] Confocal laser scanning microscopy (CLSM) image of microcapsules (insert is after treating with rhodamine 6G to stain the capsule wall).     

Cobalt-catalyzed regioselective carbocyclization reaction of o-iodophenyl ketones and aldehydes with alkynes, acrylates, and acrylonitrile: a facile route to indenols and indenes

An efficient cobalt-catalyzed carbocylization for the synthesis of indenols and indenes and a new method for reductive decyanation are described. 2-Iodophenyl ketones and aldehydes 1a-g undergo carbocyclization with various disubstituted alkynes 2a-k in the presence of Co(dppe)I(2) and zinc powder in acetonitrile at 80 degrees C for 3 h to afford the corresponding indenol derivatives 3a-s and4a-m in good to excellent yields. For some unsymmetrical alkynes, the carbocyclization was remarkably regioselective, affording a single regioisomer. The cobalt-catalyzed carbocyclization reaction was successfully extended to the synthesis of indene derivatives. Thus, the reaction of 2-iodophenyl ketones and aldehydes (1) with acrylates H(2)C=CHCO(2)R (7a-d) and acrylonitrile H(2)C=CHCN (7e) proceeds smoothly in the presence of Co(dppe)Cl(2)/dppe and zinc powder in acetonitrile at 80 degrees C for 24 h to afford the corresponding indenes 8a-k and 9a-c in moderate to good yields. Interestingly, when 7e was employed for the carbocylization, reductive decyanation also occurred to give an indene derivative without the cyano functionality. A possible mechanism for this cobalt-catalyzed carbocyclization reaction is also proposed.     

Molybdenum complexes of bioinorganic interest. New dioxomolybdenum(VI) complexes of schiff bases derived from salicylaldehydes and salicylhydrazide

Summary New dioxomolybdenum(VI) complexes MoO₂L · H₂O (LH₂=Schiff base) derived from Salicylhydrazide and salicylaldehyde, 5-chloro-, 5-bromo-, 5-nitro-, 3-methoxy, 3-ethoxy-, 3,5-dichlorosalicylaldehyde and 2-hydroxy-1-naphthaldehyde have been synthesized and characterized, together with the MoO₂L · THF adducts. The complexes are monomers, nonelectrolytes and diamagnetic, and contain acis O=Mo=O     

Determination of drug and fatty acid binding capacity to pluronic f127 in microemulsions

We propose that one can deduce very insightful information regarding the drug and fatty acid binding capacity of microemulsions through simple turbidity experiments. Pluronic F127-based oil-in-water microemulsions of various compositions were synthesized and titrated to turbidity with concentrated amitriptyline, an antidepressant drug. We observed that, above certain Pluronic F127 concentrations, turbidity was never observed, irrespective of how much amitriptyline was added to the microemulsion. We also observed that whenever sodium caprylate fatty acid was not included in the microemulsion formulation, turbidity never occurred. On the basis of these findings, we were able to determine the point at which all sodium caprylate present in the microemulsion formulation was bound to the F127 in the microemulsion (i.e., no fatty acid was free in the bulk in monomer form). By the same logic we were also able to determine how much amitriptyline was binding to the microemulsions. We also measured the dynamic surface tension, foamability, and fabric wetting time of the microemulsion formulations to further prove the hypothesis that all fatty acid is bound to the F127 in the microemulsion above a critical Pluronic F127 concentration. On the basis of this research, we have concluded that there are approximately 11 molecules of sodium caprylate fatty acid bound per molecule of Pluronic F127 and approximately 12 molecules of amitriptyline bound per molecule of Pluronic F127 in the optimal microemulsion formulation. These findings give us valuable information about the charge density at the oil/water interface and about the mechanism of binding of the drug to the microemulsion.     

Simultaneous large enhancements in thermopower and electrical conductivity of bulk nanostructured half-Heusler alloys

Large reductions in the thermal conductivity of thermoelectrics using nanostructures have been widely demonstrated. Some enhancements in the thermopower through nanostructuring have also been reported. However, these improvements are generally offset by large drops in the electrical conductivity due to a drastic reduction in the mobility. Here, we show that large enhancements in the thermopower and electrical conductivity of half-Heusler (HH) phases can be achieved simultaneously at high temperatures through coherent insertion of nanometer scale full-Heusler (FH) inclusions within the matrix. The enhancements in the thermopower of the HH/FH nanocomposites arise from drastic reductions in the "effective" carrier concentration around 300 K. Surprisingly, the mobility increases drastically, which compensates for the decrease in the carrier concentration and minimizes the drop in the electrical conductivity. Interestingly, the carrier concentration in HH/FH nanocomposites increases rapidly with temperature, matching that of the HH matrix at high temperatures, whereas the temperature dependence of the mobility significantly deviates from the typical T(-α) law and slowly decreases (linearly) with rising temperature. This remarkable interplay between the temperature dependence of the carrier concentration and mobility in the nanocomposites results in large increases in the power factor at 775 K. In addition, the embedded FH nanostructures also induce moderate reductions in the thermal conductivity leading to drastic increases in the ZT of HH(1 - x)/FH(x) nanocomposites at 775 K. By combining transmission electron microscopy and charge transport data, we propose a possible charge carrier scattering mechanism at the HH/FH interfaces leading to the observed anomalous electronic transport in the synthesized HH(1 - x)/FH(x) nanocomposites.     

Fast Reductive Amination by Transfer Hydrogenation “on Water”

Reductive amination of various ketones and aldehydes by transfer hydrogenation under aqueous conditions has been developed, by using cyclometallated iridium complexes as catalysts and formate as hydrogen source. The pH value of the solution is shown to be critical for a high catalytic chemoselectivity and activity, with the best pH value being 4.8. In comparison with that in organic solvents, the reductive amination in an aqueous phase is faster, and the molar ratio of the substrate to the catalyst (S/C) can be set as high as 1×10⁵, the highest S/C value ever reported in reductive amination reactions. The catalyst is easy to access and the reaction is operationally simple, allowing a wide range of ketones and aldehydes to react with various amines in high yields. The protocol provides a practical and environmental friendly new method for the synthesis of amine compounds.     

Versatile Iridicycle Catalysts for Highly Efficient and Chemoselective Transfer Hydrogenation of Carbonyl Compounds in Water

Cyclometalated iridium complexes are shown to be highly efficient and chemoselective catalysts for the transfer hydrogenation of a wide range of carbonyl groups with formic acid in water. Examples include α‐substituted ketones (α‐ether, α‐halo, α‐hydroxy, α‐amino, α‐nitrile or α‐ester), α‐keto esters, β‐keto esters and α,β‐unsaturated aldehydes. The reduction was carried out at substrate/catalyst ratios of up to 50 000 at pH 4.5 and required no organic solvent. The protocol provides a practical, easy and efficient way for the synthesis of β‐functionalised secondary alcohols, such as β‐hydroxyethers, β‐hydroxyamines and β‐hydroxyhalo compounds, which are valuable intermediates in pharmaceutical, fine chemical, perfume and agrochemical synthesis.     

Liquid-phase dehydration of sorbitol under microwave irradiation in the presence of acidic resin catalysts

Liquid-phase dehydration of sorbitol has been investigated in wide reaction conditions especially under microwave irradiation in the presence of acidic resin catalysts. From the selectivity for sorbitan and isosorbide, it can be understood that the dehydration is a consecutive reaction (sorbitol to sorbitan, and finally to isosorbide) and that the sorbitan is an intermediate of the dehydration. By using microwave irradiation, the dehydration can be accelerated by around 20?C34 times compared with the rate by conventional electric heating at the same temperature, or the reaction temperature can be decreased by around 40 °C for the comparable conversion in a similar reaction time. However, the microwaves do not have noticeable effects on the selectivity for isosorbide or sorbitan. The accelerated dehydration under microwaves is mainly due to decreased activation energy.     

Photocyclisation of 3-alkoxy-6-chloro-2-(3-methylthiophen-2-yl)-4H-chromen-4-ones

Photocyclisation of 3-alkoxy-6-chloro-2-(3-methylthiophen-2-yl)-4H-chromen-4-ones in methanol with pyrex filtered UV-light lead to the formation of tetracyclic compounds through intramolecular γ-hydrogen abstraction. The methyl group on the thiophenyl ring does not interfere in the photocyclisation although it does effect the product formation.     

A convenient synthesis of the enantiomerically pure (S)-2,4-dihydroxybutyl-4-hydroxybenzoate using hydrolytic kinetic resolution

(S)-2,4-Dihydroxybutyl-4-hydroxybenzoate was prepared in an extremely simple and practical way with high enantiomeric excess (99% ee) using Jacobsen’s Hydrolytic Kinetic Resolution technique as a key step and source of chirality.