The perturbative proton form factor reexamined

We recalculate the proton Dirac form factor based on the perturbative QCD factorization theorem, which includes Sudakov suppression. The evolution scale of the proton wave functions and the infrared cutoffs for the Sudakov re-summation are carefully chosen such that the soft divergences from large coupling constants are diminished and perturbative QCD predictions are stabilized. We find that the King–Sachrajda model for the proton wave function leads to results which are in better agreement with experimental data than those from the Chernyak–Zhitnitsky wave function. Received: 27 November 1998 / Published online: 7 April 1999     

New physics effects from B meson decays

In this talk, we point out some of the present and future possible signatures of physics beyond the Standard Model from B-meson decays, taking R-parity conserving and violating supersymmetry as illustrative examples. An expanded version is available on hep-ph archive.     

A numerical experiment in DLCQ: microcausality, continuum limit and all that

Issues related with microcausality violation and continuum limit in the context of (1+1) dimensional scalar field theory in discretized light-cone quantization (DLCQ) are addressed in parallel with discretized equal time quantization (DETQ) and the fact that Lorentz invariance and microcausality are restored if one can take the continuum limit properly is emphasized. In the free case, it is shown with numerical evidence that the continuum results can be reproduced from DLCQ results for the Pauli–Jordan function and the real part of Feynman propagator. The contributions coming from k⁺ near zero region in these cases are found to be very small. In the interacting case, aspects related to the continuum limit of DLCQ results in perturbation theory in momentum space are discussed.     

Esterification of butyric acid with n-butanol: Kinetic study using experimental data and modeling

Present study involves the investigation of the esterification kinetics between butyric acid and n-butanol. This reaction was conducted in a batch reactor, utilizing homogeneous methanesulfonic acid (MSA) catalyst. Response surface methodology (RSM) was conducted prior to the kinetic study using “Design Expert; version-11.0” for finding the causal factors influencing the conversion of butyric acid. Most important factors identified with their limits against conversions (during optimization of the process using RSM) were taken up to critically analyze the effect of them on butyric acid conversion. Concentration and activity-based model of the process were proposed assuming second order reversible reaction scheme using homogeneous MSA catalyst. During the study of non-ideal behavior of the system, UNIFAC model was adapted for assessing the activity coefficients of species present in equilibrated liquid phase. Experimental data were used to evaluate kinetic and thermodynamic parameters such as rate constants, activation energy, enthalpy, and entropy of the system. The endothermic nature of esterification was confirmed by positive value of enthalpy obtained. The effect of various levels of causal variables like temperature (60–90°C), catalyst concentration (0.5–1.5 wt.%), and molar ratio of n-butanol to butyric acid (1–3) on conversion kinetics of butyric acid was investigated during transient and equilibrium phase of the reaction. It has been observed that molar ratio of butanol to butyric acid has the highest influence on the conversion. The rate equation derived offered a kinetic and thermodynamic framework to the generated data. It also exhibits a notable degree of conformity of predicted data to the experimental ones and effectively characterizes the system across different reaction temperatures, reactant molar ratio, and catalyst concentration.     

Controlled Space Radiation concept for mesh-free semi-analytical technique to model wave fields in complex geometries

Numerical modelling of the ultrasonic wave propagation is important for Structural Heath Monitoring and System Prognosis problems. In order to develop intelligent and adaptive structures with embedded damage detector and classifier mechanisms, detailed understanding of scattered wave fields due to anomaly in the structure is inevitably required. A detailed understanding of the problem demands a good modelling of the wave propagation in the problem geometry in virtual form. Therefore, efficient analytical, semi-analytical or numerical modelling techniques are required. In recent years a semi-analytical mesh-free technique called Distributed Point Source Method (DPSM) is being used for modelling various ultrasonic, electrostatic and electromagnetic wave field problems. In the conventional DPSM approach point sources are placed along the transducer faces, problem boundaries and interfaces to model incident and scattered fields. Every point source emits energy in all directions uniformly. Source strengths of these 360° radiation sources are obtained by satisfying interface and boundary conditions of the problem. In conventional DPSM modelling approach it is assumed that the shadow zone does not require any special consideration. 360° Radiation point sources should be capable of properly modelling shadow zones because all boundary and interface conditions are satisfied. In this paper it is investigated how good this assumption is by introducing the ‘shadow zone’ concept at the point source level and comparing the results generated by the conventional DPSM and by this modified approach where the conventional 360° radiation point sources are replaced by the Controlled Space Radiation (CSR) sources.     

Catechol violet as new, efficient, and versatile ligand for Cu(I)-catalyzed C-S coupling reactions

Combination of CuI and Catechol violet (CuI-CV) was employed as catalyst for the first time in the C-S coupling reaction of a wide variety of aromatic halides, such as aryl iodides, bromo pyridines, activated aryl chlorides, and vinyl iodide with thiols to afford the corresponding thioethers in good to excellent yields. Broad range of functional group tolerance present in both the coupling partners has been observed in this reaction protocol.     

Lithium antimonite: A new class of anode material for lithium-ion battery

LiSbO₃ has been synthesized by chemical mixing followed by thermal treatment at 800 °C. Field emission scanning electron microscopy revealed bar shaped multifaceted grains, 0.5–4 μm long and 0.5–1 μm wide, that cluster together as soft agglomeration. 2032 type coin cell vs Li/Li⁺ shows a flat charge–discharge plateau together with low Li intercalation/de-intercalation potential (0.2/0.5 V). A high discharge capacity of 580 mA h g^?1 has been obtained in the 1st cycle with 100% Coulombic efficiency. About 96% of the Coulombic efficiency is retained up to the 12th cycle, but at the 15th cycle, the Coulombic efficiency drops down to 88%. AC impedance spectroscopy shows an increase in electrolyte resistance (R_s) from 4.43 Ohm after the initial cycle to 12.4 Ohm after the 15th cycle indicating a probable dissolution of Sb into the electrolyte causing the capacity fading observed.     

DSC studies on the curing kinetics of chitosan–alanine using glutaraldehyde as crosslinker

The curing of chitosan–alanine with glutaraldehyde as curing agent in the presence of Chlorpheniramine Maleate (CPM) is carried out with the help of differential scanning calorimeter (DSC). The effect of concentration of chitosan and percentage of crosslinker on the curing is studied at a rate of 5 °C/min. Cure kinetics are measured from 30 to 200 °C at four different heating rates (3, 5, 7 and 10 °C/min). It is observed that the crosslinking of chitosan–alanine is an exothermic process which results in a positive peak in the curves. An increase in activation energy (E _α) is observed with extent of conversion.     

An explicit analytical expression for bed-load layer thickness based on maximum entropy principle

The present study aims to derive an analytical model on bed-load layer thickness in an open channel turbulent flow carrying sediments. Determination of the thickness of the bed-load layer is of utmost importance in the study of bed-load transport as it is required to determine the bed-load transport rate, as well as in the study of suspended load transport as it acts as reference level for the particles in suspension. Apart from the several deterministic approaches available in the literature, the work adopts probabilistic approach based on entropy theory to determine the bed-load layer thickness. The concept of entropy theory developed by Shannon is used and the method of Lagrange multipliers is employed for the maximization of entropy function to find the least biased probability distribution. To calculate the Lagrange multipliers, present in the probabilistic model of dimensionless bed-load layer thickness, two different methodologies are presented. The model of bed-load layer thickness is a function of dimensionless shear stress and also depends on three other parameters which are found to be functions of specific gravity of sediment particle and dimensionless particle diameter from a non-linear regression analysis. The proposed model is validated with wide sets of experimental data available in literature and a good agreement is achieved. Apart from comparison with data, the model is also compared with existing deterministic model and computation of relative percentage error proves the better efficiency of the present model.     

A DFT+U study of the catalytic activity of lanthanum nickelate

A density functional theory + Hubbard U (DFT+U) method is implemented to investigate the catalytic activity of lanthanum nickelate (LaNiO₃) for oxygen reduction reaction. Comparison of the surface energies of different LaNiO₃ surfaces shows that {001} surface has the lowest surface energy and hence maximum stability. Two possible terminations of the {001} surface namely LaO and NiO₂ are considered to carry out all our DFT calculations. Calculation of bond lengths of the atoms near the surface and adsorption energies for the reaction intermediates revealed that LaO terminated {001} surface is unstable for the process of OOH adsorption and hence not preferred for the oxygen reduction reaction. However, NiO₂ terminated {001} surface shows excellent catalytic activity for adsorption of all the reaction intermediates and hence is a favourable surface for reactions to occur. Superiority of the NiO₂ terminated {001} surface as catalyst over the LaO terminated one, is also confirmed from the total and partial density of states of the surfaces in presence of the adsorbates, which also shows that the desorption rate of the reaction intermediates is low in case of LaO terminated {001} surface compared to the NiO₂ terminated one.