Importance of the diamine reactant in the production of polyphosphonamides by the interfacial technique

The stirred interfacial polycondensation of phenylphosphonic dichloride and 1,6-hexanediamine has been studied as a function of several reaction variables. The reaction is rapid, being completed in less than 1 min. When organic solvent is varied and reactant molar ratio is varied with an excess of the acid chloride, yield is constant. When reactant molar ratio is varied polymer yield increases with increase in amine concentration. When reactant concentration is increased yield increases. With the addition of a soluble salt in the aqueous phase yield is increased. The above indicates that the diffusion of the amine to the reaction zone is of primary importance in determining polymerization rate and that the diffusion of the acid chloride is relatively unimportant. Polymer yield was found to be dependent on the pH of the amine in the aqueous phase. The observed trend is related to the apparent solubility of the amine in the aqueous phase such that the greater the apparent solubility of the amine, the less the polymer yield. Polymer molecular weight is found to be independent of reaction variables tested. Polymer was also formed from the condensation of phenylphosphonic dichloride with p-phenylenediamine, H₂N-D-NH₂ (where D is a 36-carbon hydrocarbon chain), 1,3-di-4-piperidylpropane, and 4-aminomethylpiperidine; phenyl phosphorodichloridate with 1,6-hexanediamine; chloromethyl phosphonic dichloride with 1,6-hexanediamine.     

Mössbauer and molecular orbital study of the myoglobin-CO complex

Experimental Mössbauer spectra of the Fe⁵⁷-enriched CO complex of sperm whale myoglobin (MbCO) at T= 4.2 K with and without applied magnetic field (H⊥γ) were measured to derive the sign of the electric field gradient (EFG), the quadrupole splitting ΔE _Q, and the isomer shift δ of the heme iron. We find a positive EFG, δE _Q = 0.363 mm/sec, and δ + 0.266 mm/sec. Molecular orbital calculations were carried out to obtain theoretical estimates of EFG and ΔE _Q for several steric arrangements of the CO ligand relative to the heme group. Our results are most consistent with the conclusion that the iron is situated in the heme plane, and that a bent geometry with a Fe-C-O angle of about 135 ° is more favorable than a more symmetric structure with a linear Fe-C-O geometry.     

Phenylated polyimides: Diels-Alder reaction of biscyclopentadienones with dimaleimides

A series of phenylated polydihydrophthalimides has been synthesized by the Diels-Alder reactions of 3,3′-(oxydi-p-phenylene)bis(2,4,5-triphenylcyclopentadienone) and 3,3′-(p-phenylene)bis(2,4,5-triphenylcyclopentadienone) with N,N′-o-, -m-, and -p-phenylenedimaleimide. The polydihydrophthalimides were soluble in dimethylformamide (DMF) and had intrinsic viscosities that ranged from 0.33 to 1.01, the polymers were dehydrogenated thermally and chemically to afford the corresponding phenylated polyphthalimides. The totally aromatic polyimides were also soluble in DMF but had intrinsic viscosities only as high as 0.41. The thermogravimetric analyses of the polyphthalimides showed breaks near 530°C in air and in nitrogen atmospheres.     

The nature of the C-defects in nickel and their rôle in the interpretation of radiation damage in metals

In previous Perturbed-Angular-Correlation (PAC) studies of the - emission of ¹¹¹In probe nuclei in cold-worked or particle-irradiated nickel, it has been found that thermal annealing in the temperature regime of recovery stage III leads to the formation of so-called C-defects (Cubic defects). This is indicated by the occurrence of a new frequency of about 80 Mrad/s, in addition to the frequency (200 Mrad/s) that is due to ¹¹¹In on substitutional sites. Obviously, the C-defects are complexes consisting of ¹¹¹In and the intrinsic point-defect species that migrates freely in recovery stage III. Therefore, they have played an important rôle in the long-standing controversy on whether the recovery-stage-III defects are vacancies (one-interstitial model) or self-interstitials (two-interstitial model). The present paper reports on a novel experimental effort to reveal the nature of the C-defects by combining PAC studies on nickel samples differently pretreated in a systematic way, investigations of the Extended X-ray Absorption Fine Structure (EXAFS) on In-doped nickel, and measurements of the decay rate of ¹¹¹In nuclei in the Electron-Capture-Induced Decay (ECID). On the basis of the results of these experiments it is concluded that the defects trapped by substitutional ¹¹¹In atoms (In_s) in recovery stage III are self-interstitials (I), as expected according to the two-interstitial model. Moreover, there is evidence that the C-defects are In interstitials on tetrahedral sites (In_i) that form exclusively in the vicinity of the specimen surface from In_s – I pairs via the reaction In_s+I In_i.     

Particle directionality and trapped proton fluences on LDEF

Directionality of incident space radiation is a significant factor in spacecraft shielding and astronaut dosimetry in low Earth orbit (LEO). Particle directionality of GCR and trapped protons were measured on LDEF with plastic nuclear track detectors (PNTD) from the P0006 west-side experiment. This experiment consisted of a thick detector stack and is described more fully in a companion article (Benton et al., 1996). The anisotropy of the trapped protons produced maximum intensity for protons arriving from the west. The fluences of the eastward directed trapped protons have been measured by selection of the particles on the basis of range in the PNTDs. The measured fluences are compared with the model calculations of Armstrong and Colborn (1993).     

Computer controlled spreading resistance system for measurement of carrier concentration profiles of silicon structures

A new computer controlled equipment for carrier concentration profile determination of silicon structures by a spreading resistance technique is presented. The required data and plots can easily be obtained by means of a new software package, which has been specially developed for this purpose. Measurements have been performed on different structures in order to verify the suitability of both the measuring system and the software package. The reproducibility has been found to be within 5% for the investigated structures.     

7-Deazaadenosine: Oligoribonucleotide building block synthesis and autocatalytic hydrolysis of base-modified hammerhead ribozymes

A 7-deazaadenosine ( = tubercidin; c⁷A; 1 ) building block for solid-phase oligoribonucleotide synthesis was prepared. The amino group of 1 was protected with the (dimethylamino)methylidene residue (→ 3 ), and the monomethoxytrityl group was introduced at OH? C(5′) (→ 4 ). Protection of OH? C(2′) was carried out by silylation, showing that use of the (i-Pr)₃Si group resulted in high 2′-O-selectivity (→ 5b , 80%). Reaction of 5b with PCl₃ afforded the phosphonate 7 which was used in solid-phase oligoribonucleotide synthesis. The autocatalytic hydrolysis of hammerhead ribozymes using pG-G-G-A-G-U-C-A-G-U-C-C-C-U-U-C-G-G-G-G-A-C-U-C-U-G-A-A-G-A-G-G-C-G-C as substrate strand (S) and modified G-C-G-C-C-G-A-A-A-C-U-C-C-C as enzyme strand (E) was studied. When c⁷A replaced A¹³ or A¹⁴, a small decrease of catalytic activity was observed, while modification in position A¹⁵ enhanced the autocatalytic hydrolysis. The results demonstrate, that the atom N(7) of adenosine in any of these positions is not crucial for ribozyme action.