Construction of a simple optical sensor based on air stable lipid film with incorporated urease for the rapid detection of urea in milk

This work describes the construction of a simple optical sensor for the rapid, selective and sensitive detection of urea in milk using air stable lipid films with incorporated urease. The lipid film is stabilized on a glass filter by polymerization using UV (ultra-violet) radiation prior its use. Methacrylic acid was the functional monomer, ethylene glycol dimethacrylate was the crosslinker and 2,2′-azobis-(2-methylpropionitrile) was the initiator. Urease is incorporated within this mixture prior to the polymerization. The presence of the enzyme in these films quenched this fluorescence and the colour became similar to that of the filters without the lipid films. A drop of aqueous solution of urea provided a “switching on” of the fluorescence which allows the rapid detection of this compound at the levels of 10⁻⁸ M concentrations. The investigation of the effect of potent interferences included a wide range of compounds usually found in foods and also of proteins and lipids. These lipid membranes were used for the rapid detection of urea in milk.     

Gold Nanoparticle Modified Screen Printed Electrodes for the Trace Sensing of Arsenic(III) in the Presence of Copper(II)

Gold ensembles for the trace level sensing of arsenic(III) in the presence of copper(II) are reported. The gold ensembles are fabricated using citrate capped gold nanoparticles which are chemically synthesised in an aqueous solution with an aliquot of this simply cast onto an economical and disposable screen printed electrode. After drying at room temperature, the gold ensembles are ready for use. The gold ensembles are explored towards the sensing of arsenic(III) in the presence of copper(II) using anodic stripping voltammetry where the corresponding stripping peaks are well resolved and using this protocol it is possible to readily detect 3 µg L^?1 (3 ppb) with a detection limit of 0.4 µg L^?1 (0.4 ppb). Proof‐of‐concept is also shown for the sensing of arsenic(III) in a canal water sample. Given the low cost of the sensor and ease of fabrication, the gold ensembles hold promise for the sensing of arsenic(III) in water samples where copper(II) may be present.     

Finite volume schemes for dispersive wave propagation and runup

Finite volume schemes are commonly used to construct approximate solutions to conservation laws. In this study we extend the framework of the finite volume methods to dispersive water wave models, in particular to Boussinesq type systems. We focus mainly on the application of the method to bidirectional nonlinear, dispersive wave propagation in one space dimension. Special emphasis is given to important nonlinear phenomena such as solitary waves interactions, dispersive shock wave formation and the runup of breaking and non-breaking long waves.     

Temporal cleaning of a high-energy fiber-based ultrafast laser using cross-polarized wave generation

We report the use of cross-polarized wave generation to perform both pulse shortening and temporal cleaning of a high-energy ytterbium-doped fiber-based femtosecond laser system. The nonlinear processes allow both a highly efficient nonlinear conversion of 20% and a large compression ratio of 3.5, with inherently improved coherent and incoherent contrasts. This results in the generation of 37 μJ, 115 fs pulses at a repetition rate of 100 kHz with high temporal quality.     

Novel diblock copolymer‐grafted multiwalled carbon nanotubes via a combination of living and controlled/living surface polymerizations

Diels–Alder cycloaddition reactions were used to functionalize multiwalled carbon nanotubes (MWNTs) with 1‐benzocylcobutene‐1′‐phenylethylene (BCB‐PE) or 4‐hydroxyethylbenzocyclobutene (BCB‐EO). The covalent functionalization of the nanotubes with these initiator precursors was verified by FTIR and thermogravimetric analysis (TGA). After appropriate transformations/additions, the functionalized MWNTs were used for surface initiated anionic and ring opening polymerizations of ethylene oxide and ε‐caprolactone (ε‐CL), respectively. The OH‐end groups were transformed to isopropylbromide groups by reaction with 2‐bromoisobutyryl bromide, for subsequent atom transfer radical polymerization of styrene or 2‐dimethylaminoethyl methacrylate to afford the final diblock copolymers. ¹H NMR, differential scanning calorimetry (DSC), TGA, and transmission electron microscopy (TEM) were used for the characterization of the nanocomposite materials. TEM images showed the presence of a polymer layer around the MWNTs as well as the dissociation of MWNT bundles. Consequently, this general methodology, employing combinations of different polymerization techniques, increases the diversity of diblocks that can be grafted from MWNTs. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1104–1112, 2010     

State diagrams of arabinoxylan-water binaries

Since Arabinoxylans are natural polysaccharides that seem promising candidates as cryostabilizers, the state diagram (i.e. the representation in the temperature-composition plan of the macroscopic phases) of their aqueous solutions seemed worth determining.

Two lots of purified water extractable arabinoxylans (WEA) of different molecular mass (56 and 410 kDa labeled as LMW-AX and HMW-AX, respectively) were used to prepare aqueous solutions of various composition. These were cooled below their freezing point and annealed for 2 h at a suitable temperature before a DSC 5°C min⁻¹ heating run aimed at determining their primary glass transition temperature, T_g′, and the onset of ice fusion. Once the corresponding composition, C_g′, was assessed, the main curves of the corresponding state diagram were drawn.

As expected, the T_g′ value drawn for HMW-AX was higher (−17°C) than for LMW-AX (−35°C). The C_g′ was instead found close to 75% w/w for both HMW-AX and LMW-AX. The fictitiousness of this coincidence could be easily recognized by expressing the solute concentration in molar fraction, X: it was then possible to verify that, as expected, X_g′ for LMW-AX was one order of magnitude larger than for HLW-AX.     

High-performance liquid chromatography of glutathione conjugates

Summary An ion-exchange high-performance liquid chromatographic method is described for the quantitative assay of glutathione (GSH) conjugates derived from endogenous electrophilic substances as well as xenobiotics. GSH (reduced and oxidized forms) and GSH conjugates were condensated with o-phthaldialdehyde to highly fluorescent derivatives and monitored at 338 nm excitation and 450 nm emission wavelengths after separation by ion-exchange HPLC on a 60-5NH₂ Polygosil analytical column. The detection limit was 2 pmol for the GSH conjugate of cholesterol epoxide and 6 pmol for the GSH conjugate of oleic acid epoxide. This method allows sensitive determination of all GSH conjugates independent of the chromatographic and spectrophotometric properties of the electrophilic substrates. Using this method we could show for the first time that the endogenous compound oleic acid epoxide is a specific substrate for the cytosolic rat liver GSH S-transferase. The method is applied to the determination of GSH S-transferase activity towards oleic acid epoxide and cholesterol epoxide.