2-μm high-power multiple-frequency single-mode Q-switched Ho:YLF laser for DIAL application

We report on the development and the demonstration of a two-wavelength single-frequency laser oscillator based on Ho:YLF crystal. This laser is especially suitable for application as a transmitter in differential absorption lidar (DIAL)/integrated path differential absorption (IPDA) measurements of atmospheric carbon dioxide (CO₂) using the R30 CO₂ absorption line at 2,050.967 nm. The oscillator consists in a fiber-coupled and free-space solid-state hybrid system and can be used in high-energy middle-rate or moderate-energy high-rate configurations. The latter produced On and Off sequentially single-frequency laser pulses with 13 mJ of energy at a repetition rate of 2 kHz and pulse duration of 42 ns. The pulse energy and frequency stabilities are specially documented in free-running, single-frequency and two-frequency seeding single-mode operations. Standard deviation is 7.7 % for pulse energy and 2 MHz for frequency stability for the two-wavelength seeding operation. Allan variance plot shows that frequency fluctuations are reduced below 70 kHz for 10 s of averaging which is suitable for accurate CO₂ DIAL or IPDA measurements.     

The Groupoidal Analogue \widetilde{{\Theta}} to Joyal’s Category Θ is a Test Category

We introduce the groupoidal analogue $\widetilde{\Theta}$ to Joyal’s cell category Θ and we prove that $\widetilde{\Theta}$ is a strict test category in the sense of Grothendieck. This implies that presheaves on $\widetilde{\Theta}$ model homotopy types in a canonical way. We also prove that the canonical functor from Θ to $\widetilde{\Theta}$ is aspherical, again in the sense of Grothendieck. This allows us to compare weak equivalences of presheaves on $\widetilde{\Theta}$ to weak equivalences of presheaves on Θ. Our proofs apply to other categories analogous to Θ.     

Efficacy of End-Only-Functionalized Oligo(arylene-ethynylene)s in Killing Bacterial Biofilms

Cationic end-only-functionalized oligo(arylene-ethynylene)s (EO-OPEs) have recently been found to be broad-spectrum and effective antimicrobial agents because of their unique structure and optical properties. In this study, we investigated their potential use for preventing and reducing Escherichia coli (E. coli) biofilms. The Calgary biofilm device (CBD) was used to form bacterial biofilms of E. coli; in these studies, the minimum inhibitory concentration (MIC) and the minimum biofilm eradication concentration (MBEC) were determined. E. coli biofilms uniformly grow on pegs of the CBD device lid. The MIC values determined for EO-OPEs are comparable to those found for standard antibiotics such as kanamycin (MIC = 11.2 μg/mL). About 10-30 times the concentration of EO-OPEs was required to eradicate E. coli biofilms and prevent regrowth in the dark. Near-UV irradiation of EO-OPEs enhanced their efficacy in killing biofilms.     

Quantum gray solitons in confining potentials

We define and study holelike excitations (the Lieb II mode) in a weakly interacting Bose liquid subject to external confinement. These excitations are obtained by semiclassical quantization of gray solitons propagating on top of a Thomas-Fermi background. Radiation of phonons by an accelerated gray soliton leads to a finite lifetime of these excitations. It is shown that, for a large number of trapped atoms, most of the Lieb II levels can be experimentally resolved.     

Longitudinal static optical properties of hydrogen chains: finite field extrapolations of matrix product state calculations

We have implemented the sweep algorithm for the variational optimization of SU(2) U(1) (spin and particle number) invariant matrix product states (MPS) for general spin and particle number invariant fermionic Hamiltonians. This class includes non-relativistic quantum chemical systems within the Born-Oppenheimer approximation. High-accuracy ab initio finite field results of the longitudinal static polarizabilities and second hyperpolarizabilities of one-dimensional hydrogen chains are presented. This allows to assess the performance of other quantum chemical methods. For small basis sets, MPS calculations in the saturation regime of the optical response properties can be performed. These results are extrapolated to the thermodynamic limit.     

Physical and Chemical Characterization of Therapeutic Iron Containing Materials: A Study of Several Superparamagnetic Drug Formulations with the β-FeOOH or Ferrihydrite Structure

The effectiveness of therapeutically used iron compounds is related to their physical and chemical properties. Four different iron compounds used in oral, intravenous, and intramuscular therapy have been examined by X-ray powder diffraction, iron-57 Mössbauer spectroscopy, transmission electron microscopy, BET surface area measurement, potentiometric titration and studied through dissolution kinetics determinations using acid, reducing and chelating agents. All compounds are nanosized with particle diameters, as determined by X-ray diffraction, ranging from 1 to 4.1 nm. The superparamagnetic blocking temperatures, as determined by Mössbauer spectroscopy, indicate that the relative diameters of the aggregates range from 2.5 to 4.1 nm. Three of the iron compounds have an akaganeite-like structure, whereas one has a ferrihydrite-like structure. As powders the particles form large and dense aggregates which have a very low surface area on the order of 1 m²?g^?1. There is evidence, however, that in a colloidal solution the surface area is increased by two to three orders of magnitude, presumably as a result of the break up of the aggregates. Iron release kinetics by acid, chelating and reducing agents reflect the high surface area, the size and crystallinity of the particles, and the presence of the protective carbohydrate layer coating the iron compound. Within a physiologically relevant time period, the iron release produced by acid or large chelating ligands is small. In contrast, iron is rapidly mobilized by small organic chelating agents, such as oxalate, or by chelate-forming reductants, such as thioglycolate.

     

Asymmetry in the Multiprotein Systems of Molecular Biology

Signaling in living systems needs to achieve high specificity, to be reversible, and to achieve high signal to noise. Signaling mediated by multiprotein systems has evolved that avoids the requirement for high-affinity binary complexes that would be difficult to reverse and which, in the overcrowded cell, would lead to excessive noise in the system. Symmetrical structures are only occasionally formed. When they are, it is principally to colocate components, for example, the tyrosyl kinases of growth factors, where dimers form. Symmetry is, however, often broken, presumably to create more sensitivity and specificity in the signaling system by assembling other components, into higher-order multiprotein systems. The binding of a single heparin to two 1:1 FGF:FGFR complexes is an example, as is the binding of a single ligase to the Xrcc4 dimer, perhaps so creating a further DNA-binding site.     

Charge-transfer mechanism for cytochrome c adsorbed on nanometer thick films. Distinguishing frictional control from conformational gating

Using nanometer thick tunneling barriers with specifically attached cytochrome c, the electron-transfer rate constant was studied as a function of the SAM composition (alkane versus terthiophene), the omega-terminating group type (pyridine, imidazole, nitrile), and the solution viscosity. At large electrode-reactant separations, the pyridine terminated alkanethiols exhibit an exponential decline of the rate constant with increasing electron-transfer distance. At short separations, a plateau behavior, analogous to systems involving -COOH terminal groups to which cytochrome c can be attached electrostatically, is observed. The dependence of the rate constant in the plateau region on system properties is investigated. The rate constant is insensitive to the mode of attachment to the surface but displays a significant viscosity dependence, change with spacer composition (alkane versus terthiophene), and nature of the solvent (H(2)O versus D(2)O). Based on these findings and others, the conclusion is drawn that the charge-transfer rate constant at short distance is determined by polarization relaxation processes in the structure, rather than the electron tunneling probability or large-amplitude conformational rearrangement (gating). The transition in reaction mechanism with distance reflects a gradual transition between the tunneling and frictional mechanisms. This conclusion is consistent with data from a number of other sources as well.     

Polypropylene ionic thermoplastic elastomers: Synthesis and properties

Polypropylene ionic thermoplastic elastomers have been prepared by melt radical grafting of maleic anhydride onto polypropylene in the presence of N-bromosuccinimide followed by neutralization of the resulting elastomeric grafted polypropylene using sodium salts. Sodium hydroxide and sodium acetate were compared in aqueous solution, as anhydrous or hydrated powders. The neutralization reaction was followed by Fourier transform infrared spectroscopy, allowing the development of a method to determine the effective neutralization degree. Important physical changes were recorded upon neutralization. Especially thermal stability, shear storage modulus and complex viscosity in the flow region were largely increased as a function of the neutralization degree.     

Mechanistic pathways for the reaction of quercetin with hydroperoxy radical

The extensive theoretical study of the interaction of one of the most abundant and reactive flavonols, quercetin, with hydroperoxy radical (HOO·), using the M052X/6-31 + Gd, p level of theory, was performed. Results indicating that quercetin is not a planar molecule are in accord with the X-ray analysis. The applied method successfully reproduces the bond dissociation enthalpy, and reveals that the reaction of quercetin with the hydroperoxy radical is governed by a hydrogen atom transfer mechanism. It is confirmed that the 3′OH and 4′OH are the most reactive sites, and that the reaction in the 3′OH position is faster than that in the 4′OH position.