Inductively coupled plasma mass spectrometric determination of molybdenum in urine

A method was developed for the determination of molybdenum (Mo) in human urine by direct dilution of the sample in doubly distilled water with 1% HNO3 (v/v) and inductively coupled mass spectrometry (ICP-MS). In and Y were used as internal standards. Since (98)Mo provides a higher sensitivity, it was chosen as the reference isotope. The influence of different factors, such as sample dilution, HNO3 concentration and the stability of the analyte were evaluated. The detection limit (LOD) was assessed at 0.2 microg/L Mo, while the lower limit of quantification (LOQ) was 0.6 microg/L. Recoveries ranged between 97.2 and 100.7% from solutions containing from 10 to 50 microg/L Mo. Linear calibration curves were generated from 2.1 and 52.1 microg/L with coefficients of variation (CV ) ranging from 1.62 to 3.56%. In order to establish reference values (RV) for molybdenum, the procedure presented here was used to determine Mo in the urine of a population group living in Tuscany, Italy.     

The use of nonendcapped C18 columns in the cleanup of clenbuterol and a new adrenergic agonist from bovine liver by gas chromatography-tandem mass spectrometry analysis

More specific official methodology is needed to survey the illegal use of clenbuterol in animal production plus the synthesis of new compounds that currently elude routine analytical methods. The identification of a new adrenergic agonist, N1-(2-(4-amino-3,5-dichlorophenyl)-2-hydroxyethyl)-N1-isopropyl-propanamide (known as compound A) in animal feed has prompted studies to verify if the existing cleanup procedures developed for clenbuterol are really effective. This study considers the ion-exchange mechanism on cyanopropyl (CN), sulfonic cation exchange (SCX), mixed phase (MPH) (C8 + SCX), and nonendcapped C18 (C18NE) solid-phase extraction (SPE) columns. Results indicate that compound A (by contrast with clenbuterol) is not efficiently retained on the CN, SCX, and MPH SPE columns (recovery <10%). This finding thus leads to the development of a gas chromatography-tandem mass spectrometry procedure based on C18NE SPE that is able to purify both agonists from bovine livers spiked at 0.5, 1.0, and 2.0 ppb with a mean recovery of 93% for clenbuterol and 92% for compound A.     

12-Acylindolo[1,2-c]quinazolines by palladium-catalyzed cyclocarbonylation of o-alkynyltrifluoroacetanilides

6-Trifluoromethyl-12-acylindolo[1,2-c]quinazolines are prepared in high yield through the palladium-catalyzed reaction of bis(o-trifluoroacetamidophenyl)acetylene with aryl or vinyl halides and triflates. The reaction, which tolerates a variety of important functional groups, probably involves the formation of a 3-acyl-2-(o-trifluoroacetamidophenyl)indole intermediate, followed by its cyclization to the indoloquinazoline product. [reaction: see text]     

Trinuclear pyrazine-bridged ruthenium complexes: syntheses, electrochemistry, NIR-Vis spectra, and their interpretation in terms of a 5-orbital-3-parameter model

A study of absorption spectra in the near-infrared (NIR) and visible (vis) regions of trinuclear Ru complexes containing pyrazine (pyz) as bridging ligand, trans-[(Ru(NH(3))(5)pyz)(2)Ru(NH(3))(4)](m+)(m = 6-9), is reported. The spectra were recorded on aqueous solutions containing the described species formed in situ by stoichiometric additions of a standard solution of Ce(SO(4))(2). They were interpreted in terms of a simple 5-orbital-3-parameter model which includes the effects of d-pi interaction and electronic correlation. The model is shown to account for the observed NIR-vis spectra of the complex ions. The 6+ parent species was synthesized by an improved literature method and fully characterized. The novel 8+ complex was also prepared and characterized. The 9+ ion was established to be slowly reduced by water, with dioxygen formation. Electrochemical (CV and DPV) studies were performed on the trinuclear 6+ complex, as well as on its constituent fragments [Ru(NH(3))(5)(pyz)](2+) and trans-[Ru(NH(3))(4)(pyz)(2)](2+).     

A new type of entanglement involving one-dimensional ribbons of rings catenated to a three-dimensional network in the nanoporous structure of [Co(bix)2(H2O)2](SO4).7H2O [bix = 1,4-bis(imidazol-1-ylmethyl)benzene

Co(II) sulfate reacts with the flexible ligand 1,4-bis(imidazol-1-ylmethyl)benzene (bix) to yield the coordination network [Co(bix)2(H2O)2](SO4).7H2O, containing polymeric ribbons of rings which penetrate and catenate a 3D single frame of the CdSO4 topology, to produce an open-channel entangled architecture with nanoporous behaviour.     

An efficient palladium-catalyzed synthesis of cinnamaldehydes from acrolein diethyl acetal and aryl iodides and bromides

The reaction of aryl iodides and bromides with acrolein diethyl acetal in the presence of Pd(OAc)(2), (n)()Bu(4)NOAc, K(2)CO(3), KCl, and DMF, at 90 degrees C until the disappearance of the acetal followed by the addition of 2 N HCl to the crude reaction mixture, affords cinnamaldehydes in good to high yields. A variety of functional groups are tolerated in the aryl halides, including ether, aldehyde, ketone, ester, dialkylamino, nitrile, and nitro groups. The presence of substituents close to the oxidative addition site does not hamper the reaction.     

Chemo‐ and Enzyme‐Catalyzed Reactions Revealing a Common Temperature‐Dependent Dynamic Solvent Effect on Enantioselectivity

The enantiomeric ratio E of enzyme‐catalyzed (Candida antarctica lipase and lipase PS) and chemo‐catalyzed (L ‐proline‐based diamines) acylation reactions of 1‐(naphthalen‐2‐yl)ethanol, 2‐phenylpropanol, and 2‐benzylpropane‐1,3‐diol is dependent on solvent and temperature. Plots of ln E vs. 1/T showed the presence of inversion temperatures (T_inv). The T_inv values for the bio‐catalyzed and the chemo‐catalyzed reactions are fairly in agreement, and correspond as well to the T_NMR values obtained by variable‐temperature ¹³C‐NMR experiments on the substrates in the same solvent of the resolution. This result demonstrates that clustering effects in the substrate solvation manage the chemical and the enzymatic enantioselectivity, and, moreover, that the solute? solvent cluster is always the real reacting species in solution for chemical as well as for enzymatic reactions.     

Flexible protocol for the chemo- and regioselective building of pyrroles and pyrazoles by reactions of Danishefsky's dienes with 1,2-diaza-1,3-butadienes

The versatility of the Mukaiyama-Michael-type addition/heterocyclization of Danishefsky's diene with 1,2-diaza-1,3-butadienes was applied to the synthesis of both 4 H-1-aminopyrroles and 4,5 H-pyrazoles. Thus, the same reagents furnished different types of highly functionalized azaheterocycles essentially depending on their structure: as a matter of fact, R1 = COOR or CONR 2 differently affects the acidity of the proton at the adjacent carbon. An unexpected formation of 5 H-1-aminopyrroles from the reactions carried out in water was also observed.     

Properties of alkali metal atoms deposited on a MgO surface: a systematic experimental and theoretical study

The adsorption of small amounts of alkali metal atoms (Li, Na, K, Rb, and Cs) on the surface of MgO powders and thin films has been studied by means of EPR spectroscopy and DFT calculations. From a comparison of the measured and computed g values and hyperfine coupling constants (hfccs), a tentative assignment of the preferred adsorption sites is proposed. All atoms bind preferentially to surface oxide anions, but the location of these anions differs as a function of the deposition temperature and alkali metal. Lithium forms relatively strong bonds with MgO and can be stabilized at low temperatures on terrace sites. Potassium interacts very weakly with MgO and is stabilized only at specific sites, such as at reverse corners where it can interact simultaneously with three surface oxygen atoms (rubidium and cesium presumably behave in the same way). Sodium forms bonds of intermediate strength and could, in principle, populate more than a single site when deposited at room temperature. In all cases, large deviations of the hfccs from the gas-phase values are observed. These reductions in the hfccs are due to polarization effects and are not connected to ionization of the alkali metal, which would lead to the formation of an adsorbed cation and a trapped electron. In this respect, hydrogen atoms behave completely differently. Under similar conditions, they form (H(+))(e(-)) pairs. The reasons for this different behavior are discussed.     

Environment effects on the CO vibrational shifts in erbium complexes: a quantum chemical study

The stability of lanthanide complexes and the efficiency of the energy transfer process, which makes these molecules interesting materials for technological applications, are correlated to the chemical environment surrounding the metal ion. In particular the efficiency depends on the relative position of the antenna (the ligand moiety that acts as photon absorption center) and the lanthanide ion (the emitting center), while the stability of the complex is correlated to the strength of the coordination between the rare earth and the ligands. For these reasons, knowledge of the structural properties of the complex is an interesting task to achieve. Since a large number of ligand structures hold the carboxylate group (COO(-)), which is used as an anchor for binding the antennae to the lanthanide ion, in this work we will show how the vibrational shifts of this group, induced by the interactions between the carboxylate moiety and the metal center of the lanthanide complex, can be used for obtaining in a simple way information on the structure of the chemical environment surrounding the lanthanide ion.