Water Miscible Mono Alcohols’ Effect on the Proteolytic Performance of Bacillus clausii Serine Alkaline Protease

In this study, our investigations showed that the increasing concentrations of all examined mono alcohols caused a decrease in the V _m, k _cat and k _cat/K _m values of Bacillus clausii GMBE 42 serine alkaline protease for casein hydrolysis. However, the K _m value of the enzyme remained almost the same, which was an indicator of non-competitive inhibition. Whereas inhibition by methanol was partial non-competitive, inhibition by the rest of the alcohols tested was simple non-competitive. The inhibition constants (K _I) were in the range of 1.32–3.10 M, and the order of the inhibitory effect was 1-propanol>2-propanol>methanol>ethanol. The ΔG ^≠ and ΔG ^≠ _E???T values of the enzyme increased at increasing concentrations of all alcohols examined, but the ΔG ^≠ _ES value of the enzyme remained almost the same. The constant K _m and ΔG ^≠ _ES values in the presence and absence of mono alcohols indicated the existence of different binding sites for mono alcohols and casein on enzyme the molecule. The k _cat of the enzyme decreased linearly by increasing log P and decreasing dielectric constant (D) values, but the ΔG ^≠ and ΔG ^≠ _E???T values of the enzyme increased by increasing log P and decreasing D values of the reaction medium containing mono alcohols.     

Sensitive and selective determination of tolterodine tartrate and its electrochemical investigation on solid carbon based electrodes

Tolterodine tartrate, a muscarinic receptor antagonist, was oxidized in various buffer media with different pH values using cyclic, differential pulse, and square wave voltammetric techniques on glassy carbon and boron-doped diamond electrodes. Two irreversible anodic peaks were obtained. The oxidation process of tolterodine tartrate was diffusion controlled depending on pH for both electrodes. A detailed oxidation mechanism was proposed and discussed. The dependences of the peak current and peak potentials on pH, concentration, nature of the buffer, and scan rate were investigated. A linear response between the peak current and the tolterodine tartrate concentration was obtained using differential pulse and square wave voltammetric techniques in the range of 0.4–8.0 μM for the peak at lower potential in acetate buffer at pH 5.7 and 0.4–40.0 μM for the peak at higher potential in 0.1 M H₂SO₄ on glassy carbon electrode and in the range of 0.4–40.0 μM in Britton-Robinson buffer at pH 11.0 on boron-doped diamond electrode. Limit of detection values varied between 0.04 and 0.13 μM for both techniques and electrodes. The repeatability, reproducibility, precision, and accuracy of the proposed methods were investigated. The recovery studies were also achieved to check selectivity, precision, and accuracy of the methods. The proposed methods were successfully applied to determine tolterodine tartrate from pharmaceutical dosage forms without any interference from inactive excipients.     

A fiber optic spectrophotometric determination of urinary indoxyl sulfate (indican) after cloud point extraction

This work describes a new, simple, and sensitive colorimetric determination method for indoxyl sulfate (indican) by fiber optic UV-Vis spectrophotometry coupled to cloud point extraction as the separation-preconcentration method. This method is based on the diazotization of sulphanilic acid in acidic medium followed by its coupling with indoxyl sulfate (indican), which gives an azo product and extraction of the colored product using the cloud point extraction (CPE) technique. The optimal extraction and reaction conditions (e.g., acid and reagent concentrations, effect of time) were studied, and the analytical characteristics of the method (e.g., limit of detection, linear range, preconcentration factor) were obtained. Linear response was achieved within 0.9–44 μg/mL and the detection limit was estimated as 0.6 μg/mL. The inter-day and intraday relative standard deviations were in the ranges 1.2–1.3% and 1.6–1.8% for indican. The method was applied to the determination of indican in human spiked urine samples; Recoveries within 96–99% were obtained.     

Biosensing approach for glutathione detection using glutathione reductase and sulfhydryl oxidase bienzymatic system

Chitosan membrane with glutathione reductase and sulfhydryl oxidase (SOX) was subsequently integrated onto the surface of spectrographic graphite rods for obtaining a glutathione biosensor. The working principle was based on the monitoring of O₂ consumption that correlates the concentration of glutathione during the enzymatic reaction. A linear relationship between sensor response and concentration was obtained between 0.5 and 2.0 mM for oxidized glutathione (GSSG), and 0.2–1.0 mM for reduced glutathione (GSH) in the presence of 2 μM nicotinamide adenine dinucleotide phosphate (NADPH) under the optimum working conditions. Also, reduced/oxidized glutathione were separated by HPLC and utility of bienzymatic system was investigated as an electrochemical detector for the analysis of these compounds. All data were given as a comparison of two systems: biosensor and diode array detector (DAD).     

DFT Study of the 1-Octene Metathesis Reaction Mechanism with WCl(6)/C Catalytic System

A catalytic system consisting of tungsten carbene generated from WCl(6) and an atomic carbon is investigated theoretically for the metathesis of 1-octene at B3LYP/extended LANL2DZ level of DFT. The ground-state geometries and charge distributions of the structures belonging to the reaction mechanism are located. Energetics for the complete set of reactions, involving the formation of the tungsten carbene precatalyst, Cl(4)WCCl(2), the formation of tungsten methylidene and tungsten heptylidene with this precatalyst, and finally productive and degenerative metathesis steps with these alkylidene species are calculated in terms of total electronic energy and thermal energies. The free-energy (ΔG(298)) surfaces of the structures involved in the related reactions are constructed. In addition, solvent effects on the single point energies of the structures are investigated for two different solvents, namely, cyclohexane and chloroform. The results indicate that the formation of the catalytically active heptylidene is energetically favored in comparison to the formation of methylidene, while the degenerative and productive metathesis steps are competitive. In the catalytic cycle, the formation of ethylene is exothermic, while the formation of 7-tetradecene is endothermic. As expected, solvent effects on the metathesis reactions are minor and solvation does not cause any change in the directions of the overall metathesis reactions.     

Rational or statistical routes from 1-acyldipyrromethanes to meso-substituted porphyrins. Distinct patterns, multiple pyridyl substituents, and amphipathic architectures

New methodology is described for the synthesis of porphyrins bearing four (A 4, cis-A 2B 2, cis-ABC 2, trans-A 2B 2) or fewer (A, cis-AB, cis-A 2, trans-A 2) meso substituents. The method entails condensation of two 1-acyldipyrromethanes in the presence of a metal salt (MgBr 2, 3 mol equiv) and a noncoordinating base (DBU, 10 mol equiv) in a noncoordinating solvent (toluene) with heating (conventional or microwave irradiation) and exposure to air. The rational synthesis of trans-A 2B 2- or trans-A 2-porphyrins was achieved via condensation of two identical 1-acyldipyrromethanes. The statistical synthesis of various meso-substituted porphyrins was achieved via condensation of two nonidentical 1-acyldipyrromethanes. Both routes possess attractive features including (1) no scrambling, (2) good yield (up to 60%) at high concentration (100 mM) for the macrocycle-forming step, (3) reasonable scope (aryl, heteroaryl, alkyl, or no substituent), (4) short reaction time ( approximately 2 h) via microwave irradiation, (5) magnesium porphyrins as the products, which easily undergo demetalation, and (6) facile chromatographic purification. A key advantage of the statistical route is to obtain a cis-substituted porphyrin without the corresponding trans isomer. For example, reaction of an A/B-substituted 1-acyldipyrromethane and the fully unsubstituted 1-formyldipyrromethane gave the magnesium chelates of three porphyrins: the trans-A 2B 2-porphyrin, the "hybrid" cis-AB-porphyrin, and porphine (no trans-AB-porphyrin can form), which were readily demetalated and separated as the free base species. Altogether 26 1-acyldipyrromethanes and 26 target porphyrins have been prepared, including many with two different pyridyl substituents. One set of amphipathic porphyrins includes cis-A 2B 2- or cis-A 2BC-porphyrins wherein A = pentyl and B/C = pyridyl ( o-, m-, p-). Taken together, the rational and statistical routes enable facile conversion of readily available 1-acyldipyrromethanes to diverse porphyrins bearing 1-4 meso substituents for which access is limited via other methods.     

New copper(II) complexes including pyridine-2,5-dicarboxylic acid: synthesis,spectroscopic, thermal properties,crystal structure and how these complexes interact with purified PON 1 enzyme

We report the synthesis of two square-pyramidal copper(II) complexes, [Cu(2,5-pydc)(2-aepy)(H₂O)]·H₂O, 1, and [Cu(2,5-pydc)(2-ampy)(H₂O)]·H₂O, 2 (2-aepy = 2-(aminoethyl)pyridine, 2-ampy = 2-(aminomethyl)pyridine, 2,5-pydc = pyridine-2,5-dicarboxylic acid or isocinchomeronic acid). The synthesized complexes have been characterized by X-ray diffraction, FT-IR, elemental, and thermal analysis techniques. The crystal structure of 1 was established by X-ray analysis. Powder X-ray diffraction analysis showed that the complexes are pure. The inhibition of human serum paraoxonase 1 (PON 1, EC 3.1.8.1) enzyme with these complexes were investigated. We used diethyl 4-nitrophenyl phosphate as a substrate to measure the paraoxonase activity of PON 1 enzyme spectrophotometrically. Complexes 1 and 2 decreased the in vitro PON 1 activity with different inhibition mechanisms. Complexes 1 and 2 inhibited paraoxonase activity of this enzyme as competitively and noncompetitively, respectively.     

New metal complexes with diclofenac containing 2-pyridineethanol or 2-pyridinepropanol: synthesis,structural, spectroscopic,thermal properties,catechol oxidase and carbonic anhydrase activities

Four new neutral diclofenac-based complexes, [Co(dicl)2(2-pyet)2] 1, [Ni(dicl)2(2-pyet)2] 2, [Cu2(dicl)2(2-pyet)2] 3, and [Cu2(dicl)2(2-pypr)2] 4 have been synthesized and characterized by elemental analysis, FT-IR, thermal analysis. Complexes 1, 3, and 4 have also been characterized by X-ray single-crystal structural analysis. The compounds of Co(II) and Ni(II) have octahedral geometry with two diclofenac and two 2-pyridineethanol ligands in the coordination sphere. The compounds of Cu(II) have square-pyramidal geometry and Cu(II) ions are linked via oxygens to the bridging 2-pyridineethanol or 2-pyridinepropanol ligands. The Δν values acquired by FT-IR are in agreement with the single XRD data. Studies on the thermal properties are reported and the complexes are stable to 196, 216, 215, and 201 °C in air, respectively. Two dinuclear Cu(II) complexes have demonstrated catalytic activity on oxidation of 3,5-di-tert-butylcatechol to 3,5-di-tert-butylquinone showing saturation kinetics at high substrate concentrations. The diclofenac complexes are investigated as inhibitors of the human cytosolic isoforms hCA I and II. The complexes are good as hCA I inhibitors (Kis of 1.52–55.06 μM) but only moderately efficient as hCA II inhibitors (Kis of 0.23–5.61 μM).     

Folic‐Acid‐Modified Conducting Polymer: Electrochemical Detection of the Cell Attachment

Here, postfunctionalization and bioapplication of a π‐conjugated polymer named 4‐[4H‐dithieno(3,2‐b:2′,3′‐d)pyrrol‐4‐yl]aniline (DTP‐aryl‐NH₂) are reported, which is successfully synthesized via electropolymerization onto the glassy carbon electrode. Folic acid (FA) is used to modify the amino functional polymer via N‐(3‐dimethylaminopropyl)‐N′‐ethylcarbodiimide hydrochloride/N‐hydroxysuccinimide chemistry for the further steps. The selective adhesion of folate receptor positive cells on the surface is followed by the electrochemical methods. Cyclic voltammetry and electrochemical impedance spectroscopy have been used to characterize stepwise modification of the electroactive surface. After optimization studies such as scan rate during the polymer deposition, FA amount for the efficient surface targeting, incubation time with the cells etc., analytical characterization is carried out. The surface morphologies at each step are imaged by using fluorescence microscopy.