A new dinuclear copper (II) complex of 2,5–Furandicarboxyclic acid with 4(5)‐Methylimidazole as a high potential α‐glucosidase inhibitor: Synthesis,Crystal structure,Cytotoxicity study,and TD/DFT calculations

A new dinuclear copper (II) complex of 2,5–furandicarboxyclic acid with 4(5)‐methylimidazole, [Cu (FDCA)((4(5)MeI)₂]₂·2H₂O, was synthesized, and its structure characterized by XRD, FT–IR and UV–Vis spectroscopic techniques. The α‐glucosidase inhibition and cytotoxicity study of the synthesized Cu (II) complex were determined by IC₅₀ values. The optimized geometry and vibrational harmonic frequencies for the Cu (II) complex were obtained by using Density Functional Theory (DFT) of HSEh1PBE/6–311++G(d,p)/LanL2DZ level. TD‐DFT/HSEh1PBE/6–311++G(d,p)/LanL2DZ level with CPCM model was applied to examine the electronic spectral properties and major contributions were determined via Swizard program. To investigate linear and nonlinear optical behavior of the synthesized Cu (II) complex, the α, Δα and χ⁽¹⁾/β, γ and χ⁽³⁾ parameters called linear/nonlinear optical parameters in gas phase and ethanol solvent were computed at the same level and basis set. Furthermore, molecular electrostatic potential (MEP) surface was determined by using the same level. The docking study of the Cu (II) complex to the binding site of the target protein (the template structure S. cerevisiae isomaltase) is fulfilled. Natural bond orbital (NBO) analysis was used to investigate the hyperconjugative interactions, inter‐ and intra‐molecular bonding and to determine coordination around Cu (II) ion. Finally, present work is the first remarkable scientific report of mixed‐ligand (H₂FDCA and 4(5)MeI) Cu (II) complex as novel drug candidate for DM II. It is also determined that microscopic third?NLO parameters for the Cu (II) complex is remarkable.     

FT-IR, FT-Raman vibrational spectra and molecular structure investigation of 2-chloro-4-methylaniline: A combined experimental and theoretical study

In this work, the experimental and theoretical vibrational spectra of 2-chloro-4-methylaniline (2Cl4MA, C₇H₈NCl) were studied. FT-IR and FT-Raman spectra of 2Cl4MA in the liquid phase have been recorded in the region 4000–400 cm⁻¹ and 3500–50 cm⁻¹, respectively. The structural and spectroscopic data of the molecule in the ground state have been calculated by using Hartree-Fock (HF) and density functional method (B3LYP) with the 6-31G(d), 6-31G(d,p), 6-31+G(d,p), 6-31++G(d,p) and 6-311G(d), 6-311G(d,p), 6-311+G(d,p), 6-311++G(d,p) basis sets. The vibrational frequencies have been calculated and scaled values have been compared with experimental FT-IR and FT-Raman spectra. The observed and calculated frequencies are found to be in good agreement. The complete assignments were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. The DFT-B3LYP/6-311++G(d,p) calculations have been found more reliable than the ab initio HF/6-311++G(d,p) calculations for the vibrational study of 2Cl4MA. The optimized geometric parameters (bond lengths and bond angles) were compared with experimental values of aniline and p-methylaniline molecules.     

Electrochemical polymerization of 1-(4-nitrophenyl)-2,5-di(2-thienyl)-1 H-pyrrole as a novel immobilization platform for microbial sensing

Two types of bacterial biosensor were constructed by immobilization of Gluconobacter oxydans and Pseudomonas fluorescens cells on graphite electrodes modified with the conducting polymer; poly(1-(4-nitrophenyl)-2,5-di(2-thienyl)-1 H-pyrrole) [SNS(NO₂)]. The measurement was based on the respiratory activity of cells estimated by the oxygen consumption at − 0.7 V due to the metabolic activity in the presence of substrate. As well as analytical characterization, the linear detection ranges, effects of electropolymerization time, pH and cell amount were examined by using glucose as the substrate. The linear relationships were observed in the range of 0.25–4.0 mM and 0.2–1.0 mM for G. oxydans and P. fluorescens based sensors, respectively.     

Use of amidoximated hydrogel for removal and recovery of U(VI) ion from water samples

Poly(acrylamidoxime-co-2-acrylamido-2-methylpropane sulfonic acid) (PAMSA) hydrogel was prepared by copolymerization of acrylonitrile and 2-acrylamido-2-methylpropane sulfonic acid as monomer, N,N′-methylenebis(acrylamide) as crosslinking agent and potassium peroxodisulfate as initiator. Amidoximated copolymer network was prepared by the reaction of copolymer network with hydroxylamine hydrochloride. A batch procedure was used for the determination of the characteristics of the U(VI) solid phase extraction from the amidoximated hydrogel. The determination of U(VI) was performed by spectrophotometric method using arsenazo-III as complexing agent. Optimal pH value for the quantitative preconcentration was 3, and full desorption was achieved with 3 mol L⁻¹ HClO₄. The adsorption process can be well described by the pseudo-second-order kinetic model, and the equilibrium adsorption isotherm was closely fitted with the Langmuir model. A preconcentration factor of 20 and the three sigma detection limit of 2.8 μg L⁻¹ (n = 20) were achieved for uranium(VI) ions. The PAMSA hydrogel was used for separating and preconcentrating the uranyl ion existing in sea water samples, thermal spring water samples and the certified reference materials (TMDA 64; fortified lake water sample).     

An on-line preconcentration/separation system for the determination of bismuth in environmental samples by FAAS

An on-line preconcentration procedure for the determination of bismuth by flame atomic absorption spectrometry (FAAS) has been described. Lewatit TP-207 chelating resin, including iminodiacetate group, packed in a minicolumn was used as adsorbent material. Bi(III) was sorbed on the chelating resin, from which it could be eluted with 3 mol L⁻¹ HNO₃ and then introduced directly to the nebulizer-burner system of FAAS. Best preconcentration conditions were established by testing different resin quantities, acidity of sample, types of eluent, sample and eluent solution volumes, adsorption and elution flow rates, and effect of interfering ions. The detection limit of the method was 2.75 μg L⁻¹ while the relative standard deviation was 3.0% for 0.4 μg mL⁻¹ Bi(III) concentration. The developed method has been applied successfully to the determination of bismuth in pharmaceutical cream, standard reference materials and various natural water samples with satisfactory results.     

Chemometrical Interpretation of Lake Waters after their Chemical Analysis by Using Aas,Flame Photometry and Titrimetric Techniques

This article reports the distribution of trace metals and major ions in lake waters of Sultansazl L < L , a reedfield near Kayseri, Turkey. The determination of elements such as Cr, Ni, Cu, Cd and Pb in lake water samples was performed by AAS after a preconcentration step using a column packed with Amberlite XAD-16 resin. Both flame- and graphite furnace-atomic absorption spectrometry was used to determine these metals in lake water samples. The concentrations of the metals bound to humic substances, and free metal ions were determined after their sorption-elution on the resin, separately. The column method optimized with sodium tetraborate reagent was used in determining the free metal ions. In the determinations of Ca²⁺ and Mg²⁺, K⁺ , and SO2-4 , Cl ^m and total hardness, flame atomic absorption spectrometry, flame photometry, and titrimetry were used, respectively. In order to evaluate the analytical data by multivariate statistical techniques which enable feature reduction and grouping of the pollutant sources in lake waters from their chemical composition, principal component analysis (PCA), cluster analysis (CA) and correlation analysis were used. As a consequence of multivariate statistical evaluation, main anthropogenic sources like traffic, industry and agricultural processes were drawn to be responsible from the pollution in the environment investigated.     

Enantioselective addition of diethylzinc to aldehydes catalyzed by β‐amino alcohols derived from (1R,2S)‐norephedrine

β‐Amino alcohols derived from (1R,2S)‐norephedrine were synthesized and used as ligands in the catalytic enantioselective diethylzinc addition to benzaldehydes. N‐alkylated (1R,2S)‐norephedrine‐based derivative 3a gave the highest enantioselectivity. The effects of different parameters on the enantioselectivity of the product were investigated. Copyright © 2009 John Wiley & Sons, Ltd.     

A Validated Thin-Layer Chromatographic Method for Analysis of Bupropion Hydrochloride in a Pharmaceutical Dosage Form

JPC – Journal of Planar Chromatography – Modern TLC - A simple and sensitive thin-layer chromatographic method has been established for analysis of bupropion hydrochloride in...     

Solvent effect on the synthesis of clarithromycin: A molecular dynamics study

Clarithromycin (6-O-methylerythromycin A) is a 14-membered macrolide antibiotic which is active in vitro against clinically important gram-positive and gram-negative bacteria. The selectivity of the methylation of the C-6 OH group is studied on erythromycin A derivatives. To understand the effect of the solvent on the methylation process, detailed molecular dynamics (MD) simulations are performed in pure DMSO, pure THF and DMSO:THF (1:1) mixture by using the anions at the C-6, C-11 and C-12 positions of 2',4"-[O-bis(TMS)]erythromycin A 9-[O-(dimethylthexylsilyl)oxime] under the assumption that the anions are stable on the sub-nanosecond time scale. The conformations of the anions are not affected by the presence of the solvent mixture. The radial distribution functions are computed for the distribution of different solvent molecules around the 'O-' of the anions. At distances shorter than 5 A, DMSO molecules are found to cluster around the C-11 anion, whereas the anion at the C-12 position is surrounded by the THF molecules. The anion at the C-6 position is not blocked by the solvent molecules. The results are consistent with the experimental finding that the methylation yield at the latter position is increased in the presence of a DMSO:THF (1:1) solvent mixture. Thus, the effect of the solvent in enhancing the yield during the synthesis is not by changing the conformational properties of the anions, but rather by creating a suitable environment for methylation at the C-6 position.