Determination of fumonisins B1 and B2 in corn by liquid chromatography/mass spectrometry with immunoaffinity column cleanup: single-laboratory method validation

A single-laboratory method validation was conducted to establish the effectiveness of an immunoaffinity column cleanup procedure followed by liquid chromatography/mass spectrometry (LCIMS) for the determination of fumonisins B1 and B2 (FBI + FB2) in corn. The test portion is extracted with acetonitrile-methanol-water (25 + 25 + 50). The extract is filtered, diluted with phosphate-buffered saline solution, and applied to an immunoaffinity column. FB1 + FB2 are removed with methanol and directly determined by reversed-phase LC with MS detection using selected-ion monitoring of 2 characteristic ions in each case. Test portions of blank corn samples were spiked with a mixture of FB1 + FB2 to give total levels of 200 and 500 ng/g, respectively. Recoveries of both FB1 and FB2 from spiked samples averaged 90.4-101%. Based on results for spiked raw corn (triplicates at 2 levels), the relative standard deviation for repeatability ranged from 2.8 to 7.1%. The accuracy of the method was demonstrated by analysis of Food Analysis Performance Assessment Scheme (FAPAS) test material. The method was also applied to a small survey of processed corn products such as corn chips, cornflakes, and popcorn.     

Photoconductive novel mesomorphic oxotitanium phthalocyanines

The synthesis and photoconductivity properties of the alkylthia and triethyleneoxysulfonyl substituted oxotitanium(IV) phthalocyanines (1a and 2a) are reported for the first time. The new compounds have been characterized by elemental analysis, IR, ¹H and ¹³C NMR spectroscopy, electronic spectroscopy and mass spectroscopy. The mesogenic properties of these new materials were studied by differential scanning calorimetry and optical microscopy. The electrical dark conductivities (σ_d) and photoconductivities (σ_ph) of deposited films of 1a and 2a were investigated in various media with different concentrations of oxygen. Molecular oxygen increases photoconductivities (σ_ph) significantly. The photoconductivity mechanism and formation of Pc⁺ which is positive charge carrier under the light irradiation of the phthalocyanine molecules are demonstrated using the theoretical calculations. The geometries of the oxotitanium(IV) phthalocyanines (TiOPc) are optimized with PM3 semi-empirical method, and their visible absorption maxima are calculated with ZINDO/S method. The results agree well with the observed values. It was found that for the calculation of visible absorption of neutral and positively charged substituted TiOPc molecules using ZINDO/S method could rapidly yield excellent results. Dipole moment, HOMO, LUMO energies and atomic charges are also calculated for clarification of the oxygen effect on the photoconductivity using PM3 and ZINDO/S methods.     

Natural occurrence of ochratoxin A in dried figs

Ochratoxin A (OTA) contamination in dried figs was investigated using high performance liquid chromatography (HPLC) with fluorescence detection after extraction with methanol and orthophosphoric acid and clean up by an immunoaffinity column. The limit of detection for OTA was 0.12 microg kg(-1). One hundred and fifteen samples were taken during the drying stage from 7 different districts in the Aegean Region in 2003 and 2004. Fifty-five (47.2%) of the 115 samples were found to contain detectable levels of ochratoxin A, ranging from 0.12 to 15.31 microg kg(-1). However, the OTA level for a majority of the samples was low, with only 4 samples containing OTA exceeding 1 microg kg(-1). The calculated overall median for the OTA level was below the limit of detection and the overall mean was estimated as 0.52 microg kg(-1). Frequency of ochratoxin A contamination in dried figs harvested in 2003 and 2004 are 47 and 50%, respectively. Highest contamination ratio was determined in dried figs from Erbeyli (60%), followed by Selcuk (56%), and Ortaklar (50%).     

Comparative evaluation of various total antioxidant capacity assays applied to phenolic compounds with the CUPRAC assay

It would be desirable to establish and standardize methods that can measure the total antioxidant capacity level directly from vegetable extracts containing phenolics. Antioxidant capacity assays may be broadly classified as electron transfer (ET)- and hydrogen atom transfer (HAT)-based assays. The majority of HAT assays are kinetics-based, and involve a competitive reaction scheme in which antioxidant and substrate compete for peroxyl radicals thermally generated through the decomposition of azo compounds. ET-based assays measure the capacity of an antioxidant in the reduction of an oxidant, which changes colour when reduced. ET assays include the ABTS/TEAC, CUPRAC, DPPH, Folin-Ciocalteu and FRAP methods, each using different chromogenic redox reagents with different standard potentials. This review intends to offer a critical evaluation of existing antioxidant assays applied to phenolics, and reports the development by our research group of a simple and low-cost antioxidant capacity assay for dietary polyphenols, vitamins C and E, and human serum antioxidants, utilizing the copper(II)-neocuproine reagent as the chromogenic oxidizing agent, which we haved named the CUPRAC (cupric ion reducing antioxidant capacity) method. This method offers distinct advantages over other ET-based assays, namely the selection of working pH at physiological pH (as opposed to the Folin and FRAP methods, which work at alkaline and acidic pHs, respectively), applicability to both hydrophilic and lipophilic antioxidants (unlike Folin and DPPH), completion of the redox reactions for most common flavonoids (unlike FRAP), selective oxidation of antioxidant compounds without affecting sugars and citric acid commonly contained in foodstuffs and the capability to assay -SH bearing antioxidants (unlike FRAP). Other similar ET-based antioxidant assays that we have developed or modified for phenolics are the Fe(III)- and Ce(IV)-reducing capacity methods.     

An LC Method for the Determination of Bupropion and Its Main Metabolite, Hydroxybupropion in Human Plasma

A new LC method has been developed and validated for the direct determination of bupropion and its main metabolite, hydroxybupropion in human plasma. Plasma samples were analyzed after a simple, one step protein precipitation with trichloroacetic acid using a C₈ column and mobile phase, consisting of methanol/acetonitrile/phosphate buffer (10 mM, pH 3.0) (40:10:50, v/v/v) and 20 mM 1-heptane sulfonic acid sodium salt with carbamazepine as the internal standard. UV detection was performed at 214 and 254 nm. The method was validated over the concentration range of 60–2,400 and 150–4,700 ng mL^?1 for bupropion and hydroxybupropion, respectively. The intra- and inter-day assay variability was less than 15% for the two analytes. Limit of detection values were 24.8 and 63.4 ng mL^?1 for bupropion and hydroxybupropion, respectively. The method developed was applied to quantification of bupropion and hydroxybupropion in human plasma.     

The effect of UV-A (352 nm) stress on chlorophyll fluorescence,chlorophyll a content,thickness of upper cortex and determinate DNA damage in Physcia semipinnata

In the present study, Physcia semipinnata samples were exposed to UV-A (352 nm) in 20 J m^?2 for 24 h, 48 h and 72 h to seek the alterations in the PSII photosynthetic quantum yield, thallus anatomy and DNA mutation rate in response to radiation. The Fv/Fm ratio decreased in P. semipinnata following exposure to UV-A for 24 h, 48 h and 72 h. The data of the present study reported that Chla degradation occurred by exposition of UV-A for 24 h, 48 h and 72 h. Photobiont size and thickness of upper cortex layer also showed a gradually decrease in P. semipinnata thallus sections during 24 h, 48 h and 72 h. The thickness of the upper cortex layer, exposed to UV-A for 72 h, of P. semipinnata thallus reduced 64%, compared with control. The random amplified polymorphic DNA (RAPD) technique was used to detect DNA damage. The main changes observed in the RAPD profiles resulted in both appearance and disappearance of different bands and variation of their intensity. According to RAPD assay, the genetic distance between the control group and 24 h, 48 h and 72 h UV-A exposed, groups was found 56%, 78% and 84%, respectively.     

Separation of catechins and methylxanthines in tea samples by capillary electrochromatography

In this paper, the simultaneous separation of several polyphenols such as (+)‐catechin, (–)‐epicatechin, (–)‐epigallocatechin, theophylline, caffeine in green and black teas by capillary electrochromatography (CEC) was developed. Several experimental parameters such as stationary phase type, mobile phase composition, buffer and pH, inner diameter of the columns, sample injection, were evaluated to obtain the complete separation of the analysed compounds. Baseline resolution of the studied polyphenols was achieved within 30 min by using a capillary column (id 100 μm) packed with bidentate C₁₈ particles for 24.5 cm and a mobile phase composed of 5 mM ammonium acetate buffer pH 4 with H₂O/ACN (80:20, v/v). The applied voltage and the temperature were set at 30 kV and 20°C. Precision, detection and quantification limits, linearity, and accuracy were investigated. A good linearity (R² > 0.9992) was achieved over a concentration working range of 2–100 μg/mL for all the analytes. LOD and LOQ were 1 and 2 μg/mL, respectively, for all studied compounds. The CEC method was applied to the analysis of those polyphenols in green and black tea samples after an extraction procedure. Good recovery data from accuracy studies ranged between 90% and 112% for all analytes.     

Conductivity and band gap of oligo-2-[(4-fluorophenyl) imino methylene] phenol and some of its oligomer-metal complexes

Schiff base oligomer of 2-[(4-fluorophenyl) imino methylene] phenol (FPIMP) was synthesized via oxidative polycondensation reaction in an alkaline medium. Oligomer-metal complex compounds were synthesized from the reactions of oligo-2-[(4-fluorophenyl) imino methylene] phenol (OFPIMP) with Co⁺², Ni⁺² and Cu⁺² ions. The synthesis was achieved by oxidative coupling based on air oxygen as an oxidant. While synthesized Schiff base oligomer was soluble in most common organic solvents, its metal complexes were only soluble in dimethylsulfoxide. Electrochemical HOMO and LUMO band gap (E_g) of monomer, oligomer and its metal complexes were calculated from oxidation and reduction onset values. According to cyclic voltammetry (CV) and UV-vis measurements, electrochemical energy gaps and optical band gap (E_g) values of monomer and oligomer were found to be 3.26 and 3.10; 3.15 and 2.96 eV, respectively. Conductivity measurements of doped and undoped Schiff base oligomer and its metal complexes were carried out by electrometer at a room temperature and atmospheric pressure and were calculated from four-point probe technique. When iodine was used as doping agent, conductivity of this oligomer and its metal complexes were observed to be increased.     

A biosensor based on graphite epoxy composite electrode for aspartame and ethanol detection

A gelatin membrane with carboxyl esterase and alcohol oxidase was subsequently integrated onto the surface of a graphite epoxy composite electrode (GECE). The developed biosensors showed linearity in the range of 2.5–400 μM for aspartame and 2.5–25 μM for ethanol with response times of 170 and 70 s for each analyte, respectively. The resulting bienzyme biosensor was used for aspartame detection in diet coke samples and ethanol detection in beer and wine samples. From the obtained results, it can be concluded that the developed biosensor is a selective, practical and economic tool for aspartame and ethanol detection in real samples.