A biosensor based on graphite epoxy composite electrode for aspartame and ethanol detection

A gelatin membrane with carboxyl esterase and alcohol oxidase was subsequently integrated onto the surface of a graphite epoxy composite electrode (GECE). The developed biosensors showed linearity in the range of 2.5–400 μM for aspartame and 2.5–25 μM for ethanol with response times of 170 and 70 s for each analyte, respectively. The resulting bienzyme biosensor was used for aspartame detection in diet coke samples and ethanol detection in beer and wine samples. From the obtained results, it can be concluded that the developed biosensor is a selective, practical and economic tool for aspartame and ethanol detection in real samples.     

Preparation of a new Cu(II)-imprinted polymer and its application for the determination of trace copper in water samples by flame atomic absorption spectrometry

A new Cu(II)-imprinted polymer has been prepared for selective solid-phase extraction of Cu(II) prior to its determination by flame atomic absorption spectrometry. Two functional monomers, 4-(methacryloylamino)benzamide and 4-vinylpyridine, formed a complex with Cu(II) ion through coordination interactions. The self-assembled Cu(II)-monomer complex was copolymerised via bulk polymerisation method in the presence of ethyleneglycoldimethacrylate cross-linker. In order to remove Cu(II) ions, the resulting polymer was washed with 1.0 M HNO₃ and then with water until obtaining a neutral pH. The ion imprinted polymer was characterised by Fourier transform infrared. The experimental conditions were optimised for solid-phase extraction of Cu(II) using a column of ion-imprinted polymer (IIP). Quantitative retention was achieved between pH 5.0 and 7.0, whereas the maximum recovery for the non-imprinted polymer (NIP) was about 74% at pH 7.0. The IIP showed higher selectivity to Cu(II) in comparison to the NIP. The IIP also exhibited excellent selectivity for Cu(II) in the presence of other metal ions. The relative standard deviation and limit of detection (3s) of the method were 1.6% and 1.8 µg L^?1, respectively. The method was verified by analysis of two certified reference materials (CWW-TM-D and SRM 3280) and then applied to the determination of Cu(II) in seawater and lake water samples and haemodialysis concentrates.     

On-line preconcentration and determination of Au(III) in various environmental/industrial samples by flame atomic absorption spectrometry

A rapid and simple on-line method is described for the determination of Au(III) in various samples. The method is based on the sorption of gold(III) on Lewatit MonoPlus TP207 chelating resin including the iminodiacetate group, which is used as sorbent material and packed in a minicolumn. The chemical variables such as the pH of the sample solution, eluent type, interfering ions and concentrations of reagents, and instrumental variables such as sample loading volume, reagents flow rates, and tubing length, which affect the efficiency of the method were studied and optimised. Au(III) was sorbed on the chelating resin, from which it could be eluted with 3 mol L^?1 HCl, and then introduced directly to the nebuliser-burner system of FAAS. The limit of detection of the method was 0.2 µg L^?1 while the relative standard deviation was <4.0% for 20 µg L^?1 Au(III) concentration. The preconcentration factor was found to be 106 while the optimised sample volume was 15.3 mL. The accuracy of the method was verified by analysing the certified reference material. The developed method was applied successfully for the determination of gold in different samples with satisfactory results.     

Development and validation of an LC‐MS/MS method for simultaneous quantitative analysis of free and conjugated bisphenol A in human urine

Bisphenol A (BPA) is an environmental endocrine‐disrupting chemicals that is widely used in common consumer products. There is an increasing concern regarding human exposure to BPA owing to the potential adverse effects associated with its estrogenic activity. For assessing environmental exposure to BPA, it is essential to have a sensitive, accurate and selective analytical method, especially one that can detect low BPA levels in complex sample matrices. In this study, we developed and validated an accurate, sensitive, and robust liquid chromatography–tandem mass spectrometry method for simultaneous quantification of free BPA and BPA β‐d ‐glucuronide (BPA‐gluc) concentrations in human urine with only a single injection. Calibration curves were linear over a concentration range of 1–100 ng/mL for BPA and 10–1000 ng/mL for BPA‐gluc. The levels of the analytes were determined quantitatively with HPLC/ESI‐MS/MS by using negative electrospray ionization in the select ion monitoring mode and a pentaflouraphenyl propyl column. The validated method was applied to the analysis of spot urine specimens collected from randomly selected healthy human subjects. Copyright © 2013 John Wiley & Sons, Ltd.     

Functional zinc(II) phthalocyanines bearing Schiff base complexes as oxidation catalysts for bleaching systems

Oxidation catalysis is used to increase the performance of hydrogen peroxide in laundry bleach applications. Bleach catalysts provide cost‐effective, energy‐saving and environmentally friendly bleach systems yielding perfect stain removal at lower temperatures. This comparative study is based on the synthesis of bis[bis(salicylhydrazonephenoxy)manganese(III)] phthalocyaninatozinc(II) ( 2 ), bis[bis(salicylhydrazonephenoxy)cobalt(III)] phthalocyaninatozinc(II) ( 3 ) and bis[bis(salicylhydrazonephenoxy)iron(III)] phthalocyaninatozinc(II) ( 4 ) as tri‐nuclear complexes consisting of two Schiff base complexes substituting a zinc phthalocyanine. Complexion on the periphery to obtain complexes 2 , 3 , 4 was performed through the reaction of a Schiff base‐substituted phthalocyanine using MnCl₂?4H₂O, CoCl₂?6H₂O or FeCl₃?6H₂O salts in basic condition in dimethylformamide. Fourier transform infrared, ¹H NMR, ¹³C NMR, UV–visible, inductively coupled plasma optical emission and mass spectra were applied to characterize the prepared compounds. The bleach performances of the three phthalocyanine compounds 2 , 3 , 4 were examined by the degradation of morin as hydrophilic dye. The degradation progress in the presence of catalysts 2 , 3 , 4 /H₂O₂ combination in aqueous solution was investigated using an online spectrophotometric method. It was found that the catalysts 2 , 3 , 4 exhibited better bleaching performance at 25 °C than tetraactylethylethylenediamine as bleach activator used in powder detergent formulations for stain removal. Copyright © 2015 John Wiley & Sons, Ltd.     

The effect of UV-A (352 nm) stress on chlorophyll fluorescence,chlorophyll a content,thickness of upper cortex and determinate DNA damage in Physcia semipinnata

In the present study, Physcia semipinnata samples were exposed to UV-A (352 nm) in 20 J m^?2 for 24 h, 48 h and 72 h to seek the alterations in the PSII photosynthetic quantum yield, thallus anatomy and DNA mutation rate in response to radiation. The Fv/Fm ratio decreased in P. semipinnata following exposure to UV-A for 24 h, 48 h and 72 h. The data of the present study reported that Chla degradation occurred by exposition of UV-A for 24 h, 48 h and 72 h. Photobiont size and thickness of upper cortex layer also showed a gradually decrease in P. semipinnata thallus sections during 24 h, 48 h and 72 h. The thickness of the upper cortex layer, exposed to UV-A for 72 h, of P. semipinnata thallus reduced 64%, compared with control. The random amplified polymorphic DNA (RAPD) technique was used to detect DNA damage. The main changes observed in the RAPD profiles resulted in both appearance and disappearance of different bands and variation of their intensity. According to RAPD assay, the genetic distance between the control group and 24 h, 48 h and 72 h UV-A exposed, groups was found 56%, 78% and 84%, respectively.     

Separation of catechins and methylxanthines in tea samples by capillary electrochromatography

In this paper, the simultaneous separation of several polyphenols such as (+)‐catechin, (–)‐epicatechin, (–)‐epigallocatechin, theophylline, caffeine in green and black teas by capillary electrochromatography (CEC) was developed. Several experimental parameters such as stationary phase type, mobile phase composition, buffer and pH, inner diameter of the columns, sample injection, were evaluated to obtain the complete separation of the analysed compounds. Baseline resolution of the studied polyphenols was achieved within 30 min by using a capillary column (id 100 μm) packed with bidentate C₁₈ particles for 24.5 cm and a mobile phase composed of 5 mM ammonium acetate buffer pH 4 with H₂O/ACN (80:20, v/v). The applied voltage and the temperature were set at 30 kV and 20°C. Precision, detection and quantification limits, linearity, and accuracy were investigated. A good linearity (R² > 0.9992) was achieved over a concentration working range of 2–100 μg/mL for all the analytes. LOD and LOQ were 1 and 2 μg/mL, respectively, for all studied compounds. The CEC method was applied to the analysis of those polyphenols in green and black tea samples after an extraction procedure. Good recovery data from accuracy studies ranged between 90% and 112% for all analytes.     

An LC Method for the Determination of Bupropion and Its Main Metabolite, Hydroxybupropion in Human Plasma

A new LC method has been developed and validated for the direct determination of bupropion and its main metabolite, hydroxybupropion in human plasma. Plasma samples were analyzed after a simple, one step protein precipitation with trichloroacetic acid using a C₈ column and mobile phase, consisting of methanol/acetonitrile/phosphate buffer (10 mM, pH 3.0) (40:10:50, v/v/v) and 20 mM 1-heptane sulfonic acid sodium salt with carbamazepine as the internal standard. UV detection was performed at 214 and 254 nm. The method was validated over the concentration range of 60–2,400 and 150–4,700 ng mL^?1 for bupropion and hydroxybupropion, respectively. The intra- and inter-day assay variability was less than 15% for the two analytes. Limit of detection values were 24.8 and 63.4 ng mL^?1 for bupropion and hydroxybupropion, respectively. The method developed was applied to quantification of bupropion and hydroxybupropion in human plasma.     

Natural occurrence of ochratoxin A in dried figs

Ochratoxin A (OTA) contamination in dried figs was investigated using high performance liquid chromatography (HPLC) with fluorescence detection after extraction with methanol and orthophosphoric acid and clean up by an immunoaffinity column. The limit of detection for OTA was 0.12 microg kg(-1). One hundred and fifteen samples were taken during the drying stage from 7 different districts in the Aegean Region in 2003 and 2004. Fifty-five (47.2%) of the 115 samples were found to contain detectable levels of ochratoxin A, ranging from 0.12 to 15.31 microg kg(-1). However, the OTA level for a majority of the samples was low, with only 4 samples containing OTA exceeding 1 microg kg(-1). The calculated overall median for the OTA level was below the limit of detection and the overall mean was estimated as 0.52 microg kg(-1). Frequency of ochratoxin A contamination in dried figs harvested in 2003 and 2004 are 47 and 50%, respectively. Highest contamination ratio was determined in dried figs from Erbeyli (60%), followed by Selcuk (56%), and Ortaklar (50%).