Higher dimensional cylindrical or Kasner type electrovacuum solutions

We consider a $D$ D dimensional Kasner type diagonal spacetime where metric functions depend only on a single coordinate and electromagnetic field shares the symmetries of spacetime. These solutions can describe static cylindrical or cosmological Einstein–Maxwell vacuum spacetimes. We mainly focus on electrovacuum solutions and four different types of solutions are obtained in which one of them has no four dimensional counterpart. We also consider the properties of the general solution corresponding to the exterior field of a charged line mass and discuss its several properties. Although it resembles the same form with four dimensional one, there is a difference on the range of the solutions for fixed signs of the parameters. General magnetic field vacuum solution are also briefly discussed, which reduces to Bonnor-Melvin magnetic universe for a special choice of the parameters. The Kasner forms of the general solution are also presented for the cylindrical or cosmological cases.     

Effect of irradiation on ethyl 2‐amino‐4,5,6,7‐tetrahydrobenzo[b]thiophene‐3‐carboxylate: an ESR study

Ethyl 2‐amino‐4,5,6,7‐tetrahydrobenzo[b]thiophene‐3‐carboxylate [C₁₁H₁₅NO₂S] was synthesized by the Gewald method. Its single crystals were grown from an alcohol/ethyl acetate solution at 15 °C and characterized using IR and ¹H‐NMR. These single crystals were irradiated for 72 h at 298 K by a ⁶⁰Co gamma source with a dose speed of 0.864 kGy/h. After irradiation, electron spin resonance (ESR) measurements were carried out to study radiation‐induced radicals in the temperature range from 120 to 450 K. Additionally, for the single crystal, ESR angular dependencies were measured in the xy, xz and yz planes of the substance. This irradiated single crystal was analyzed based on the ESR spectra. Analysis of the spectra revealed that the radical was formed by a C–H bond fission at the carbon end of the substance. It was also observed that the color of the sample changed after irradiation. The hyperfine and g parameters were determined from the experimental spectra. It was inferred from these results that the hyperfine parameters and g value exhibited anisotropic behavior. The average values of these parameters were calculated as follows: g = 2.0088, A_H1=H2 = 20.70 G, A_H3=H4 = 10.80 G, A_Ha = 4.59 G, A_Hb = 3.24 G and, A_N = 6.10 G. Copyright © 2011 John Wiley & Sons, Ltd.     

Application of a Statistical Technique to Investigate Calcium,Sodium, and Magnesium Ion Effect in Yeast Fermentation

In this work, the dependence of the ethanol production using Saccharomyces cerevisiae 251TP(3-2) on calcium, sodium, and magnesium ion concentration and interaction effects were studied with the use of a statistical experimental design. The parameters of the ethanol concentration model proposed on the basis of Box–Wilson experimental design method were evaluated with the use of the experimental data. Comparison of the predicted values from the model with the experimentally observed values showed that the model is a good fit. From the analysis of model equation, it was seen that sodium ion concentration has significant main effects on ethanol production, and there is interactive effect only between calcium and magnesium. With the use of developed model, maximum ethanol concentration of 3.73% (v/v) was obtained when calcium, sodium, and magnesium concentration were 1,515, 930, and 128 mg/L, respectively, for the 10% sugar concentration in synthetic molasses.     

Synthesis of poly (acrylamide-co-aconitic acid) adsorbents by gamma-irradiation,characterization, adsorption studies and application for cationic dyes removal

In this study, acrylamide (AAm)/aconitic acid (ACA) copolymers were prepared with two different mol% of aconitic acid 4%, 17% and were irradiated with gamma irradiation at different irradiation doses (4 - 25kGy). The percent yield was assigned by gravimetrical method. The effect of irradiation dose, pH and involved amounts of monomers (AAm/ACA) in hydrogels on swelling properties were investigated. The conversion of monomers to hydrogels was 100% at 25kGy. Poly(acrylamide-co-aconitic acid) P(AAm/ACA) hydrogels have been used for the adsorption of some aqueous solutions of dyes such as Methylene Blue (MB) and Safranine-O (S). The hydrogels were swollen in distilled water at pH 3, 5, 7, 8 and in aqueous solutions of dyes. The initial swelling rates of hydrogels are increased by increasing of pH. The effects of concentration of the aqueous solutions of dye and hydrogel composition on the adsorption were investigated. The adsorption is increased and changed depending on the structure of dye and composition of hydrogel.     

Capillary Electrophoretic Determination of Citalopram in Pharmaceutical Tablets and Serum

Determination of citalopram by capillary electrophoresis is described. Compounds were separated at 28 kV in 75 μm i.d. fused silica capillary tubing (total length 85 cm, effective length 65 cm) with 10 mM borate buffer, pH 8.5, containing 10% (v/v) methanol as running buffer. Citalopram and propylparaben (IS) appeared at 3.5 and 5.5 min, respectively. Repeatable linear results were obtained. The limits of detection and quantification were 5.73 × 10⁻⁶ and 1.72 × 10⁻⁵ M, respectively. When citalopram was determined in a pharmaceutical tablet by capillary electrophoresis and by a UV-spectrophotometric method differences between the results were not significant. The citalopram content of tablets was 100.8 ± 2.95% of the label claim. The amount found in serum was 26.7 ± 0.1% of the free drug, indicating that 73.3% of the drug was bound to protein.     

Determination of total antioxidant capacity by a new spectrophotometric method based on Ce(IV) reducing capacity measurement

Dietary antioxidants widely found in fruits and vegetables may serve the task of reducing oxidative damage in humans induced by free radicals and reactive oxygen species under ‘oxidative stress’ conditions. The aim of this work is to develop a simple, low-cost, sensitive, and diversely applicable indirect spectrophotometric method for the determination of total antioxidant capacity of several plants. The method is based on the oxidation of antioxidants with cerium(IV) sulfate in dilute sulfuric acid at room temperature. The Ce(IV) reducing capacity of the sample is measured under carefully adjusted conditions of oxidant concentration and pH such that only antioxidants and not other organic compounds would be oxidized. The spectrophotometric determination of the remaining Ce(IV) was performed after completion of reaction with antioxidants. Quercetin and gallic acid were used as standards for flavonoids and phenolic acids, respectively, and results of antioxidant measurements were reported as trolox equivalents. The developed procedure was successfully applied to the assay of total antioxidant capacity due to simple compounds such as trolox, quercetin, gallic acid, ascorbic acid, catechin, naringin, naringenin, caffeic acid, chlorogenic acid, ferulic acid, and p-coumaric acid, and due to phenolic acids and flavonoids in the arieal parts of nettle (Urtica Dioica L.). Blank correction of significantly absorbing plant extracts at 320 nm could be made with the aid of spectrophotometric titration. Plant selection was made in respect to high antioxidant content, and extraction was made with water. The proposed method was reproducible, and the trolox equivalent antioxidant capacities (TEAC coefficients) of the tested antioxidant compounds were correlated to those found by reference methods such as ABTS and CUPRAC. Since the TEAC coefficients found with the proposed method of naringin-naringenin and rutin-catechin pairs were close to each other, this Ce(IV)-based assay probably caused the simultaneous hydrolysis of flavonoid glycosides to the corresponding aglycones and their subsequent oxidation such that the hydrolysis products exhibed antioxidant capacities roughly proportional the number of -OH groups contained in a molecule.     

Determination of some trace elements in high-purity aluminium, zinc and commercial steel by AAS after preconcentration on amberlite XAD-1180 resin

The determination of trace metals, e.g. Bi, Cd, Pb, in high-purity aluminium, zinc and commercial steel by flame or graphite furnace atomic absorption spectrometry following their preconcentrations as iodo complexes on XAD-1180 resin by means of a short column system is described. The recoveries are quantitative (95%). The relative standard deviations varies between 6% and 10%. The relative errors are less than 8% in a concentration range of 1 × 10^–3 –4 × 10^–5%. Detection limits for flame AAS and GFAAS were in the ranges of 0.002–0.110 g/ml and 0.0003–0.004 g/ml or in the ranges of 0.08–4.40 g/g and 0.012–0.16 g/g with respect to the solid samples, respectively.     

Investigation of the scope of a new route to ABCD-bilanes and ABCD-porphyrins

A new route to bilanes and porphyrins bearing four distinct meso substituents has been studied to elucidate the scope and gain entry to previously inaccessible compounds. The route entails (i) synthesis of a 1-bromo-19-acylbilane by acid-catalyzed condensation of a 1-acyldipyrromethane and a 9-bromodipyrromethane-1-carbinol and (ii) intramolecular cyclization of the 1-bromo-19-acylbilane in the presence of a metal salt (MgBr2, 3 mol equiv) and a non-nucleophilic base (DBU, 10 mol equiv) in a noncoordinating solvent (toluene) at 115 degrees C exposed to air to afford the corresponding magnesium(II) porphyrin. In this study, two sets of bilanes were initially prepared to explore substituent effects. In the first set, all bilanes vary only in the nature of the substituent at the 10-position. In the second set, all bilanes vary only in the nature of the substituent attached to the acyl unit (the 20-position). The substituents examined at the 10- and 20-positions include alkyl, aryl (electron-rich, electron-deficient, hindered), heteroaryl, ester, or no substituent (-H). The bilanes were obtained in 35-87% yield, and the target porphyrins in up to 60% yield. Further study of the scope focused on bilanes and porphyrins bearing three heterocyclic substituents (o-, m-, p-pyridyl) or four alkyl groups (ethyl, propyl, butyl, pentyl), in which case microwave irradiation was used for the porphyrin-forming step. Altogether, 17 bilanes and 19 porphyrins were prepared and characterized. In summary, the new route provides access to meso-substituted bilanes and porphyrins for which access is limited via other methods.